Looking for a tube Preamp new or used for under $2000...

The Don Sachs Model 2 is more than just an SP-14 in a pretty chassis.  Don uses upgraded caps, wiring, attenuators, and yes, wooden cabinets.  He also mounts the tubes on top (instead of inside), so it is obviously much easier to change tubes, and looks much cooler.  Speaking of cool, having the tubes on top prevents excess heat inside the chassis, which prolongs the life of the unit.

I understand the concern about output impedance with tube preamps. According to Aric my Special preamp has an output impedance of 200 ohms across the audio frequency band. 

Must say the VTA-SP14 would interest me if I was looking for a new sub $2000 tube preamp. I am not, very happy with my Aric Audio one.

I would go with a hand built tube preamp like the aric audio, don sachs or space tech labs, way more bang for the buck than most brand name preamps.

i do not recommend the rogue audio rp 1.  it only has 3db of gain and sounds anemic.  
i do highly recommend the rogue rh 5 linestage headphone amp.  
multiple gain options, balanced connections and stereophile class a.  a bit more expensive but twice as good as the rp 1.  
i owned the rogue rp 7 for a while too and preferred the sound of the rh 5 !  

The Don Sachs preamp will be found for about $2000 on the used market when they show up.  New they're about $2500.  This preamp is just the VTA SP-14 in a pretty chassis.   The SP-14 is available as a kit for all of $1100 and fully assembled/tested for about $1500.

https://www.ebay.com/itm/Audio-Research-LS2-mkII-Classic-Tube-Hybrid-Preamplifier/174557950276?epid=... add 1975 6N23P SSW Reflectors (easy to find on eBay, look for those sold by Svetlana in Ukraine) and it will blow away most anything under $10K.
I have the version with remote and have had it since 1993.  It has run many newer much more expensive out the door in demos.

I agree with speakermaster. Tube preamps are often designed for tube power amps with input impedances of 100K or higher. Your Parasound amp has a a 33K input impedance (or 66K balanced). 

I have a Rogue RP-1 and likes it.   Stock tubes crapped out after a few years but I put in some Mullards that sound nice.  The guys at Rogue are good as well, always answer the phone and up for a chat. Phono stage is well regarded.  Only knock is the cheezy plastic remote, mine is dead from to many hard wood floor hits. Easily replaced. 

I have a Don Sachs Model 2 that I am parting with.  It uses 6SN7 tubes, which some say are better than the typical 12AX7 tubes used in preamps.  YMMV

I may be selling my Odyssey Candela if you're interested.

I just got a gently used Audio Research SP17 and am very happy with it.  I mostly listen to vinyl then reel-to-reel.  Much greater texture and resolution than a Parasound Halo 2.1 Integrated Amp.  Using the AR SP17 with a Rogue Atlas Magnum III amp.  The switch from SS to tube might have something to do with it.

@speakermaster, thanks for the advise.  How do I learn about impedance matching between preamplifier and amp?  I thought of impedance regarding speakers (4, 6 or 8 ohms) but not between electronic gear. 

I would not go for a tube preamp with a parasound amp i have owned a parsound amp for twenty years and even my audio research pre amp will not work with it the impedance mismatch is too great to overcome. Find yourself a better solid state pre amp even a good vintage one will vastly out perform a new parasound preamplifier. I have owned two parasound preamps and switched to other companies offerings because of better sound reasons.

If you have the patience to wait, I'd suggest keeping an eye out for a Backert Labs Rhumba tube preamp. They sell for ~$2k used, but only show up every couple/few months. It's a great sounding preamp and the manufacturer provides outstanding support. 

I also have the A21 but with the P5 pre.  I have also wondered what a tube preamp would do for that vaunted “tube sound”.  I’m looking at these options as well.  👍🏻

I have a PrimaLuna Prologue 3 preamp in great shape that I am planning on listing for under $1,000. Let me know if you’re interested.

+1 for rogue rp1.  Same as u went from parasound p6 to rogue.   Helped in imaging  and added organic sound to voices.  So good I then bought a rogue st100 amp.  Sounds awesome.  

+1 for the Schiit Freya +.  I own one and I've been looking for something similar in the $1K ballpark for my bedroom system but nothing so far.

Rogue Audio RP-1. Brand new. Under 2K. Built in the USA.

Plus 3 for Aric Audio...you will get far more for your money than with many of the heavily marketed suggestions mentioned here. 

I recently replaced my Luxman CL-32 with an Audio Research SP-6B for about 900 and it is WONDERFUL on my Maggies.

Look around--you don't need the top-of-the line Audio Research product to get their quality and transparency.

Cheers!

+1 for the Ultraverve

PS - I do not have the same amp as you. My monoblocks are by Audio Mirror.

Check out a used Ultraverve by deHavilland. I had integrated amps and separates based on 12Au7 tubes for years, then tried this 6sn7 signal tube based pre. In my system the 6sn7 pre gave me what I was looking for, bigger soundstage, instruments and voices just sounded more natural. Just my experience. Everyones ears are different. Rolling that 6sn7 was much cheaper also. I was surprised how much impact a preamp has on a system.

Matt, if you can solder, have patience, identify components and are not a "glitz queen", then this Japanese TU-8500 is a killer tube preamp for only $550!!!!.

MM & MC phono inputs, high or low switchable preamp gain.
Better than probably anything else up to $2k.

6 parts to this review
https://cheaptubeaudio.blogspot.com/2015/03/review-elekit-tu-8500-full-function.html

https://www.monoandstereo.com/2017/05/the-greatest-bang-for-buck-elekit-tu.html

https://tubedepot.com/products/elekit-tu-8500-stereo-tube-preamplifier-kit

https://www.elekit.co.jp/en/product/TU-8500

Cheers George

I own the parasound A21+ with the parasound p5 pre and just added a smsl su9 dac which has settings for warmer tube like settings and what a dramatic improvement. The p5 and p6 both are so very versatile in many ways but the inboard dac is lacking.  The su9 is also a preamp. All for under $500.

ARC or VAC ASAP!!!

SCHIIT FREY PLUS BEST PREAMP for $10k or less. A measly $899
with 5 year warranty

lol - well we are all allowed to dream...

Although all the recommendations are good recommendations, the difference as already pointed out is they are different but not better.  The reason why is that the designs are similar and changes are because of the tubes used, the caps and resistors, all low end parts.  IMO buy an old Counterpoint preamp and send it to me.  For under $2K I will build you a point-to-point wired preamp using a better transformer, AC filter choke, better wiring, resistors and capacitors.  All that will be left of the Counterpoint will basically be the chassis.

Happy Listening.  

+1 for BAT. I have a BAT VK-600 solid state amp paired with BAT VK-6i tube preamp. I love the combination of the heft of my class A amp with the relative warmth of a tube preamp. You can get pretty close to your $2k budget for an older, but excellent shape BAT preamp with patience. I wouldn’t expect much success overall spending less than $2k though, but I suppose it could be possible with the right circumstances.

Another vote for PrimaLuna.  Incredible at the price!

Instead of just making an arbitrary decision to get a tube amp, why not just get an amp that sounds like what you want for under $2,000?  Just because an amp uses tubes does not make it good or better than other alternatives.  And keep in mind the cost of care and feeding of a tube amp.  

SCHIIT FREY PLUS BEST PREAMP for $10k or less. A measly $899
with 5 year warranty

+1 the LTA MZ2 with the linear power supply.  Very quiet and neutral, and you can change tubes to add a little more warmth if you want.  I believe there’s a way to do an in-home trial, which would make this a no brainer IMHO.  I’d be surprised if you didn’t hear a meaningful improvement.  Thought the Rogue was also a good suggestion.  Best of luck.  

@matt00 try the SP16. They have easy resale. Maybe for you it blows it out of the park. That’s the trouble with this, any recommendation should be taken as a suggestion only. You’ll have to audition some. What works for some systems might not work for another. Look for models that are easy to sell (generally any ARC is an easy sell) or buy from someone or company that allows a trial period. I think overall, you will find most preamps “different” and whether that is “better” is up to you and your ears.

New Rogue RP1 tube preamp, less than 2K

Thanks everyone, geof the sp16 is what I was looking at, but if it didn’t make a larger enough improvement I should look elsewhere.
I just feel like my P6 is holding back some clarity and warmth. I don’t want a laid back sound, but I think a solid preamp would keep the background noise dead silent.

Have a look at the Linear Tube Audio MZ2 - great tube preamp and a wonderful headphone amp with remote volume. With the upgraded power supply it is a bit over $2K new. Hard to find used but there is one on AudioCircle currently. It won't provide a lot of softness or excess tube warmth if that's what you are looking but it made my system come alive with presence, immediacy and enough tube sound to take any edge off digital sources (all I listen to). Easy to tube roll with as well - I changed the stock NOS input tubes to 60's Mullard 12AU7's and am very pleased.

I second the recommendation of Aric Audio. Great products at real human prices,and Aric is great to deal with.  However, I agree with soix,what are you looking to improve? What shortcomings are you trying to overcome? 

I LOVE my McIntosh mx110z Tube Tuner/Preamp. I would replace it in a heartbeat if it died.

The z version has gone up in price, a bit over your budget max.

Earlier version, mx110 (has black horizontal volume control) is less money, also highly praised.

This early mx110 has been re-furbed, it has ink worn off the front panel, easy enough to fix with a sharpie

https://www.ebay.com/itm/363270393203



.....................................

some info about the difference of earlt and later z versions here

https://forums.stevehoffman.tv/threads/mcintosh-mx110-vs-mx110z.337718/

McIntosh MX 110 (EARLY)

http://mcc.berners.ch/tuner-pre-amps/MX110EARLY.pdf

MX 110Z (LATE)

http://mcc.berners.ch/tuner-pre-amps/MX110LATE.pdf

The way to tell the difference at a glance is the concentric on/off volume and rotary balance control on the late version; slider balance control on early.

Other refinements include end caps which are slimmer and vertically "Veed" on later version.

There doesn't seem to be much of a consensus as to which may sound better which suggests they probably sound essentially alike.

Agreed 100% with Steve, cosmetic condition is paramount; functional issues can always be tended.

A highly regarded and quintessential piece of vintage Mc. An essential for the vintage Mc collector.

Check out Aric Audio. Make a tube pre called the Unlimited. Great company (guy) to work with. 

I’ve had that setup. I’m not sure you are going to see a “huge” improvement in that price realm. I ran my A21 with both an ARC LS17 SE and and ARC SP16 both were “different” but certainly not a “huge” improvement. You can find an SP16 in your price range. The LS17 for a bit more.

Despite what you’ve been told, what specific improvements are YOU looking for?

search is your friend

Get a PrimaLuna tube preamp for about $2.5K - or less "pre-owned"! A quality product!

I have a BAT VK 3Ix pre I use with my A21, and yes, it works wonderfully. But I believe this concept would work well with most SS amps, unless they are overly warm. But even then . . .