Wilson's Chronosonic XVX loudspeaker over 3/4 of a million US dollars
Wonder what the impedance/-phase angle graph will look like on these puppies, looking at the amount of D'Agostino amps used to drive them, I'd say could be pretty evil.
Erik, yes, you are. There are aimed very specifically to location, both of the speaker and the listening position height etc. Quite shocking in fact, how a small change in these positions can make a dramatic difference.
To Millercarbon's question... Yes I have heard these, messed with them and helped dial them in with a friend. The system is simply amazing. Chills amazing in fact. Not sure what you are talking about with system you mentioned? Everyone has their own ears and preferences I suppose.
I think there's value in trying to figure out why products exist, who they're for, etc. If something is priced high for reasons that legitimately contribute to performance it's different than if it's just because the manufacturer is trying to appeal to a particular market, running a scam, etc.
@mikelavigne I value your posts and interactions on the various threads. I know of others who do.
Please stayed engaged and contribute. We need perspective from all levels and most who have cost no object systems are unfortunately not participating. State of the art perspective provides references and, at the end of the day, is what everyone is aiming for (within their budgets).
Because of the noise, many knowledgeable and experienced AudiogoN members no longer participate in any discussions. This is to the detriment of new members who wish to learn more. Fortunately, there is a wealth of knowledge stored in the discussion forum archives. But, who knows if it's being tapped.
unfortunately; since gear and tech evolves, archives have limited value since their relevance is out of date. what's needed is to retain more serious experienced audiophiles that do bring that knowledge base. it's the people that matter. but really i doubt that the bell can be 'un-rung' for Audiogon. the forum owners/mods are not motivated to want any change in the status quo. they tolerate all sorts of things now, that never would have past muster in times past.
it's much harder to find value for me here now, and most threads i enter get overrun by distractions. i went for a number of years not posting here at all, and recently returned trying to find some fun and enjoyment since i have more time and effort invested in Audiogon than anyone. my system thread has 3300+ posts, but is mostly dead now. use to be very much alive.
Mike: The Audiogon discussion forums have changed. Several members seem to think that their opinions are fact - in a very bloviating way. Their posts are as fatiguing a noisy tweeter.
there is just so much noise here now as you mention, as well as ultra aggressive dealers and the gear focus overall is much more down market than it had been. not a bad thing objectively as those products have value to many, but anything a bit up-scale gets run though the coals. the price gets in the way of meaningful consideration on merits.
some of that is reasonable, but other forums are able to keep dialog on point regarding musical issues so the entertainment value to me is not drowned out. i prefer to go to audio forums to escape all that stuff, not be hit in the nose with it.
on this thread i’d like to read about other alternative speakers to these big Wilson’s, not just continual shots that it exists. sigh.
mikelavigne "interesting how every different hifi forum has a different take on the big Wilson’s reflecting the particular forum culture and membership.
no right or wrong to it, but the differences are dramatic."
Mike: The Audiogon discussion forums have changed. The days of IMO or IMHO are gone. Several members seem to think that their opinions are fact - in a very bloviating way. Their chronic posts are as fatiguing a noisy tweeter.
Has anyone ever heard one of these Wilson's in a system and it sounded really good? Just curious. Because I never have. Not that I blame the speakers. Everything matters. But it sure is odd that I have heard great systems with lots of other speakers, but never with Wilson's. It also seems, now that I think about it, every one of those Wilson systems was presented with a very obvious air of snooty better-than-you-ness. Just sayin.
I myself wouldn’t own a speaker with the midrange driver wired in polarity opposite the woofers and tweeters, no matter the price. But that’s just me. I also don’t care for redheads.
eric.. can’t argue with your comment. snobbery is unacceptable at any level and it’s been a problem with some dealers but they pay a price, which they may not even be aware of. an audiophile that’s a snob is just a jerk.
it’s tiring that every Wilson thread brings out class envy which has become so prevalent in our culture.
If you mean pretentious dealers, I'm with you. :-D
But lets not ignore the opposite is also true: Snobbery. The belief that money = quality and that certain brands and only those brands can prove my audiophile credentials.
it’s tiring that every Wilson thread brings out class envy which has become so prevalent in our culture.
not equally on every forum. it is particularly prevalent (and tiring) here. on some forums it's chill enough that Wilson Audio participates. would never work here.
forums and the 'vibe' come in all shapes and sizes. no right or wrong to this.
unless you’ve heard a wilson speaker in your home criticism is conjecture at best. it’s tiring that every Wilson thread brings out class envy which has become so prevalent in our culture. I can’t afford a Ferrari but have no feelings one way or another about the owner as it has nothing to do with me. fwiw I own ‘budget’ Wilson’s and remain quite pleased.
hi, as for the six amps, on the floor, probably one each for the sub's, and i guess they were changing amps to show you, you don't need relentless to drive them, i have wilson speakers, and to my knowledge , wilson only make single wired speakers, as they really don't want you messing around with a whole mess of cables, with their speakers, for sound quality
If I was worth a couple hundred millions dollars I may consider something like this. But....... alas I am not. Better feel like a godamn orgasm everytime I turn it on.
the gate ( sold out ) last night for Grammy nominated JD Souther was $30 k. He played 3 hours with a short break. You do the math on a decent nite of listening....
he was awesome BTW...great storyteller, emotional connection to the songs...covered some artists he admires.....
Seems these type of threads always revolve around cost rather than sound quality. I've heard the XVX many times, with the Chronosonic subs, and with the right supporting gear, they are some of the best out there. IMHO of course. BTW, if you can afford the speakers, you can also afford property supporting gear including amps that can drive them.
Anyone who psychologically needs these speakers really needs the pretty little speaker wire trestles. Anything less will make your soon-to-be ex-friends worry that you are actually taking you meds.
Not that I’m defending the price of these Wilson speakers...but...
Whoever said, "There is a sucker born every minute" was so right. Hilarious!
Why? You could BUY most orchestras for that same $ and hear the actual MUSIC as opposed to listening to it from a BOX.
^^^^ This is a strangely common remark made by people who scoff at very high priced audio equipment. I’ve lost count how many times I’ve seen it. Some say "you could hire The Stones to play for you personally with that type of money," etc. Even as a joke supposed to make a point; it just utterly misses the mark.
What someone gets with a super high end system is generally what most of us want with out less pricey systems: the ability to hear a WIDE VARIETY OF MUSIC played by a WIDE VARIETY of favorite or known musicians, in the highest quality possible. Even if you just stuck to listening to symphonic music, the point is there are a huge number of recordings by heralded orchestras, conductors, classic performances, performers contempory and deceased etc, that a great system will allow you to hear in the best possible quality.
Then add to that a wider range of tastes one may have - rock, folk, pop, R&B, electronica etc - and you have an endless array of music and great performances to hear in the highest quality. So, no, you could not purchase anything LIKE the array of music by known musicians for the money you pay for even the highest priced Wilson systems.
One can certainly try to evaluate the performance/quality-to-cost ratio to render a critique of these high priced items. But this weird critique "you could hire live music for that money" should just go away, it’s so nonsensical and so utterly misses the point.
(Apologies richopp...this just happens to be one of my pet peeves)
When Wilson markets a PTS to match your Ferrari, they mean it. That is kind of the market for this except the question is which of my Ferrari's? According to Stereophile it is $329,000. The limited oligarch-grade WAMM Master Chronosonic is $850,000.
It is hard to imagine any designer believing that lower speaker impedance is a good thing. My guess is that the higher power output of many amps when driving lower loads is (was) the main motivation.
When solid state-generated watts became cheap, speaker designers started to care less and less about the impedance of the models they were creating.
Even Klipsch $20Kusd P-39f flagships at 75kg each, get harder to drive the further up the flagship ladder they go. Min 3ohms and 50'-phase angle right where the power is needed to keep the bass tight and dynamic. https://www.stereophile.com/images/archivesart/609Klipfig1.jpg
Stereophile " A nasty combination of 4 ohms magnitude and –50° electrical phase angle at 80Hz. The three woofers do demand a significant amount of current to keep up with the horn-loaded midrange and treble drive-units."
I am pretty sure only the relentless are powering the xvx. The other amp is to power the wilson subs in the corner. I heard this setup at axpona last year it is pretty amazing.
Cracks me up the way everyone acts like any of these specs matters. Definitive Audio is a huge Wilson dealer here in Seattle. Their flagship Audio Technica/Wilson/D'Agostino system is $1.3M. I heard it. Heard it right after one of their guys spent a whole day fine-tuning to present it to whoever has enough more money than brains and ears and so can be talked into buying it. Talked into it by blather just like this thread, all about specs, not one word about how it actually sounds when you listen to it playing music. Which is powerfully dynamic and,..... that's about it. In terms of, well pretty much everything else it can't hold a candle to mine, which you could have for about the Washington State sales tax you pay on their $1.3M monstrosity.
No amount of specs is enough if it doesn't sound good. And it doesn't.
We now return you to our regularly scheduled recitation of irrelevance.
Cracks me up you amp guys sweat over tenths of a % and tolerate a paper Wilson midrange ( for example as let’s say representative) that is out of phase 50% of the surface area of the cone at the crossover point...
$500 to scan your favorite driver and know the truth....
It’s cheating of course, but some of us enjoy “ low efficiency but also low trash “ speakers that are an easy load, low pass optimized with a power factor corrected feed forward bass amp and another optimized high pass amp with just 5 active components in the signal path....
somewhere... I remember a class on systems engineering...
oh and because the room is part of the system. 11 bands of analog EQ below 120 hz
I asked you that above because, I call BS on it, and you came back with this rubbish
And you can’t even get that right, give up.
What one of what you are referring to is "phase shift" in the mid highs of Class-D’s and caused by the filtering of it's output filter.
And the other for speakers is the capacitive "negative phase angle" (EPDR) loading , not even related to each other. Go away please, you have lost all cred.
erik_squires I took apart one speaker and saw circuits there deliberately designed to reduce the impedance. It made the speaker "discerning" of amplifiers.
So it wasn’t a Conjugate impedance compensation load that you saw, that makes an amp sees a constant impedance load across it’s working range??? Your saying it was deliberately done to be detrimental to weaker amplifiers that maybe demo’d with them. Please say who these terrible cads were that did this kind of thing???? And if it was Wilson or not?
twoleftears When solid state-generated watts became cheap, speaker designers started to care less and less about the impedance of the models they were creating
Really!! you and whoever else is living in a dream world, if you think this is Wilson Audio design criteria
Are you guys listening to yourselves I’ve heard many of their top range, that are a b*****s to drive and I can confidently say these will give better bass because of it and their deign principles than anything that’s 8ohm and 100db efficient and called Klipsch or similar.
When solid state-generated watts became cheap, speaker designers started
to care less and less about the impedance of the models they were
creating. Kind of a corollary of the law of supply and demand.
@twoleftears
I think this is a good observation. If Genesis only had tube amps, they probably would not have been able to release some of the speakers with the impedance issues they did.
On the other hand, I think that with the design tools and computer based optimization, there is no longer any excuse.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
