Brand new a bit of a budget-stretcher, but this really could the solution to your problem.
http://www.coda.cc/product/ Check out the CSiB
Please tutor me on some integrated amp basics.
Brand new a bit of a budget-stretcher, but this really could the solution to your problem. http://www.coda.cc/product/ Check out the CSiB |
Post removed |
Twoleftears, you're correct about the wattages after looking all these up. DJones, I researched the Anthem STR Integrated and added it to my short list. The ARC room correction function makes it interesting, Couple of others on my list also have that capability. I'm not sure how valuable an asset room correction might be relative to integrated amps without it. Don't know how well the Anthem STR's would synergize with the Magico A3's either. They certainly have the wattage and the best price point at $4500. When I get done with my short list maybe I'll post it and others can recommend which amp they'd prefer off it, and why, for use with the Magicos. Terry9 and Schubert, there are no absolutes in manufacturing anywhere. I did look into the Quad's because I've always admired their sound, but they were out of my price range plus I'm so leery of Chinese manufacturing practices. Schubert, no doubt you're correct, but the pay over there is generally abysmal by our standards, which is why the manufacturers are there or Mexico in the first place. Jafant, thanks again, stay tuned for coming attractions. Tomic60- Tim the Toolman always said, "More power!" |
Meh... Some like to make big mountains out of the mole hill of phase. It doesn’t seem to matter all that much.Except to those who have heard properly phased systems and know how a sound stage should be presented because they created it. I recorded and mixed on minimum phase error systems and have had minimum phase error home systems for over 40 years. I can’t make it through one cut on systems with phase all over the map. Sadly, for me, Focal’s fall in that category. I auditioned several models @ Stereotypes in Portland. And no amplification electronics, no matter how good, can do anything to fix phase errors. The first time an enthusiast hears a correctly phased system, they never mention tonal balance. Adjectives like precise, accurate, musical sont les mots de jour. |
Chinese quality The Quad ESL's are now made in China; I bought some. As soon as they were out of warrantee I opened them up to take a look and begin to modify. I couldn't help but notice the build quality. The Quad 2805's were a bit rough, but the 2905's were of good fit and finish. Parts quality was pretty much as it always had been, that is, could be better. I made it better, it sounded better. Not all Chinese stuff is junk. Quite a lot of it is quite good, as the Quads testify. |
Post removed |
The Anthem STR Integrated is built in Canada. Not sure how well it goes with Magico but it does 200w at 8 ohm , 400w at 4ohm , 550w at 2 ohm. It runs $4500 new. They also have power amps in your price range with more power. There should be Anthem dealers in your area might be able to get a home demo with your speakers. |
Kosst, did you read what I wrote? I said they are colored relative to another design. This applies to all devices, especially loudspeakers. I always read the entire article and comprehend all measurements and graphs. One often has to read between the lines for a reviewers preferences and biases. Neutral is in the ear of the listener. Tonally, they may be but phase, no. |
Post removed |
ayreThese are all very good brands, but I suspect that some of them won't offer the wattage that you need with the Magico's within the price point you specify. For instance, you could get Belles preamp+monoblocks new and within your budget, but that's "only" 112W into 8ohms. |
It's a very good amp that I built and tuned to suit my speakers, which are the best $4000 would buy me in my estimation.Kosst, I'm guessing since you spent $4k and have Focal, probably Aria 936. Stereophile measurements and comments, https://www.stereophile.com/content/focal-aria-936-loudspeaker-measurements suggest a rather colored sound vis a vis another design. Such designs are not everyone's cup of tea. Since the amp needed tweaking to suit the speakers, I fail to see how one can recommend a particular technology as best. It is the combination, not the components, that tells in the end. |
Jack, at Command Performance we talked about the Hegel H360 a little bit, but the focus was mostly on the speakers being demoed. Inna, I was reading up on the Accuphase amps tonight, but they are priced too far over my $6000 upper limit. Tomic60i. Thanks for the two book recommendations. I’ll have to find my notes from the demos to recall what equipment they used. I do remember the amps were around $10,000 at both places, which is higher priced than what I’ll be getting. You know I’ve never had a single problem with the Phase Linear 400’s since I got them forty or so years ago. The Phase 4000 preamp I’ve had some issues with losing the right channel. I used to bring it in right to their factory near home then in Seattle. I have been thinking, like you, that it might be pushing my luck and a potential disaster to hook the Magicos up to the old Phase 400. That’s primarily why I’m looking into getting a new integrated amp so soon, to take them both out of the picture before the back ordered Magico’s arrive in February. I’ll look up the rest of the manufacturers you listed tomorrow that I haven’t reviewed already. I also contacted one of the VP’s at Magico to refer someone to me who could make another recommendation on amps, since I didn’t care for Alon Wolf’s Chinese amp recommendation.That should go over poorly. I should have asked for him directly now that I’m thinking about it. Oh well. Yysantabarbara, the new Mark Levinson, if I’m recalling the right model, was a bit too pricey at $8500 for me. Thanks for the thought though. Mike |
Post removed |
@skyscraper Some lucky person bought the ML 585 I have mentioned a few times so that item is no longer listed. It was listed at $6400 used. Now the more recent links I have posted are for the new ML 5000 series integrated that have slightly less power than the 585. They will not be released until Q1 2019, but the MSRP is 7000-8500. Not sure people pay MSRP on these. I only keep repeating my self on the A3 + ML combo because it is really some poerful, smooth, and FATIGUE free sound coming from that |
You might also consider German T+A . I have no idea of how they sound, but the rumor is - very good. They have a range of models. Don't know if they are all made in Germany, though. I don't want Chinese either. As for South Korean, I didn't mean Samsung, I meant Allnic - tube equipment of very high quality. Still, my Samsung phone has been working flawlessly for years. I guess, Accuphase is out of your reach. |
2psyop, I'm really concerned with the quality control there and would feel like a fool if I went to that well again and ended up with more Chinese junk, especially at such high price points. I am very often disturbed by Chinese products breaking down at home, everything from electronics to plumbing parts. On the social conscience end of it, you know Chinese products are so cheap because their employees are paid so little. They don't have labor unions over there, and thousands and thousands of companies worldwide have abandoned their own work forces to take advantage of that. So I try to avoid Chinese stuff out of self interest, as well as to have a clear conscience. I'm old enough to have known some of the old union workers who paid a great personal price to fight for decent wages here. Now you only see vacant abandoned factories, and innumerable dying small towns and cities all across the nation where they worked and lived. Their sacrifices went for nothing as their companies closed up and did an end-run to China. It's no joke, and a worldwide tragedy. I honestly wouldn't want to touch products from any of the companies you named above if there is any possible alternative. Mike |
Post removed |
Post removed |
Post removed |
Post removed |
Luxman's lowest end integrated was built in China, and considerably cheaper. That was a few years back, and I don't know anymore about it. https://onahighernote.com/shop/integrated-amps/luxman-l-350aii-pure-class-a-integrated-amp/ |
Skyscraper Although I understand your reservations about Chinese manufactured audio products, not all of audio equipment is of bad quality. Line Magnetic Audio makes very good products, just look in these audio forums. Primaluna products are made in China but many audiophiles all over the world really like the products. Among just a few audio companies that have gear either designed somewhere else and built in China or Taiwan....or designed and built in China or Taiwan; BMC, Sonus Faber, Krell, Classe, Bada, Doge, Jolida, Opera Consonance, Musical Paradise, Lawrence Audio, Melody, Auralic, Aerial Acoustics, Dussan, TAD, KEF, Luxman, Musical Fidelity, B&W, Cambridge Audio, YBA. |
Yysantabara, I checked out the new Mark Levinson’s amp link you provided. they sounded perfect until I got to the price, a couple thousand or so out of my already inflated price range or $5000 to $6000. I might have jumped up another $1000 for the integral mm/mc phono stage, but can’t responsibly go to $8500 for that. Close but no cookie. Thank you much though. Mkke |
Sorry Kosst, but I have heard both FET and Bipolar devices and they definitely have different sounds. The FET usually has a more warm/fuzzy texture, but they can be relatively clear in some cases. The bipolar are ultimately cleaner sounding and have a completely different sound when biased into Class A. Bipolar devices are sometimes chosen over FET because of the distortion characteristics of FET. |
Kosst thinks that his Pass Labs F5 amp is the greatest thing in the world. And for him, that may be true. He has also touted that his system with his Focal speakers can beat almost anything out there. That perception may have some truth in it, but there is also the element of system synergy. The Pass full "Class A" circuit will have a very neutral sound, but also warm and a very thick midrange/midbass. The Focal speakers tend to have a somewhat thin and hollow sounding midrange/midbass. The combination of these two things is an example of how the thin sounding Focal is compensating for the extra thick sounding midrange of the Pass (or vice-versa depending on how you look at it). --- In looking at other amps, I just heard a set of mid level Focals with the new Classe Audio amplifiers. They are Class AB monoblocks and it definitely showed how the Focals were somewhat thin/hollow in the midrange and, therefore, seemed too bright because there was too much up top (in the high frequencies). That’s a Class AB amp. The Bryston amps (which are about the closest thing to Class B) would be a severely bad match with the Focal speakers (and a lot of other speakers as well). ---- The Pass Labs full "Class A" amps may not be a great match for every speaker or every listener. In this case, you’ll need to think about what speakers you have and what sources and then decide what kind of sound your ultimately after. |
Builder3, glad you had good luck with your used amp. I’d likely be the one with bad luck taking the same chance. I think my Dad’s many years of selling used cars taught me to stick with new, so you’re sure what you are getting. His used cars came with 90 Day Guarantees, or whenever you pulled out of the lot’s parking lot, whichever came first. Unlike his customers, he thought that was real funny. Even new equipment you can’t be sure about. I was shocked to find the Norwegian labelled Hegel I was about to spend $6000 on was manufactured in China, the home of poor quality everything. Yysantabarbara, thanks for the link. I’ll check them out in short order. Headphonedreams, same with your links. Thanks Ieales, i will pay attention to thermal management and electrolytic capacitor quality. I’’ll have to learn how to do the latter though. I’d just emailed Hegel about the former a couple of days ago and got an incomplete response. Auxinput, just when this was getting a little less confusing... kosst_amojan. Thanks again. Mike |
Post removed |
Sorry, but class A is most definitely the ideal form of audio amplification. I completely disagree. As I have said before, beauty is in the eye of the beholder. A full "FET Class A" amp will sound different than a "Bipolar Class A" amp and will sound different than a standard "Class AB" amp, (obviously Class D sounds different as well). They all introduce a different sonic signature to the mix. Personally, I have not heard any full Class A amp that I really liked, but many others love them for the full/round and warm sound - or liquidy if you are looking at a bipolar Class A circuit. |
Post removed |
Post removed |
Kosst_amojan, Class A is hardly 'ideal'. It suffers from very poor efficiency, shortened component life [heat is a killer], enormous size and higher $/w. ALL amplifier classes suffer from intrinsic failings. The key is to forget about theory and concentrate on getting a good match to the loudspeakers that does not accentuate the myriad other system faults and satisfies the owner's prejudices. Mike, since this a long term purchase, pay attention to thermal management and electrolytic capacitor quality. Ideally, the equipment should be actively cooled, preferably with thermostatically controlled fans to maintain constant internal temperature. Quality fans with well designed blades are inaudible from less than a foot away when run at low RPM. |
I like the questions and answers part from Paul McGowan of PS Audio. Here is his answer to this question https://www.youtube.com/watch?v=rj6h4qYxkCc |
Mike, I understand what you're saying about not wanted to buy used, but I'll still throw this out there. My amp was $10,000 new, something I could not have justified as a purchase. So I looked at the used offerings until I found one that was pristine, it was about a year old, and $4300. It's my only piece of used gear. Best of luck, |
Kosst_amojan, thanks again for the additional information on Class B's and C's, and the links you provided. Those squawk boxes used at fast food drive up windows must employ Class B technology, They generate almost pure distortion on a good day. Inna I don't buy Taiwanese products either. They've bought up woodworking machine manufacturers like Delta, and others, over there and run them into the ground. No trouble with Japanese products, but I've been burned on a South Korean made Samsung Smart T.V. with known defects that appear only after the warranty period expired. Mike |
Post removed |
Post removed |