Clean Power without the drawbacks of Conditioning Filtering. Advice?
Hi-
From reading i see there is a lot of talk on the drawbacks of Conditioning filtering. Dynamics and freq. limitations etc.
I want to ask if there is a power strip+cord that are not filtering. I think i could possibly get away without conditioning. From searching it looks like there are the cheapo strips that you don't want to use OR Conditioning strips.
Wondering if there is a good reliable strip that does not screw around with the sound and can also deliver to an 800w consumption tube amp.
@dumbeat - the best filtering is no filtering whatsoever, but that does not provide the best "clean power"
A lot of the noise in standard power cables is actually induced noise between the conductors inside the cables themselves.
This is where cable geometry comes into play.
More advanced cable geometries eliminate internal noise resulting in very clean power to the component.
I have tried many experiments and found that... - Simply braiding the internal conductors of a power cables helps clean up noise. - One of the best geometries I have built is the Helix Geometry - see http://image99.net/blog/files/category-002ahelix-power-cable.html
If you are not into DIY, then I would highly recommend power cables from KLE Innovations.
If you have a noisy household supply you need to address those issues up front before getting into cables and geometries. That may involve having suppressors fitted to noisy appliances by a licensed technician
also had a house-wide surge ssuppressor installed that seemed to prove beneficial as well, but that may be wishful thinking.
I have a very good household supply. Other than installing a dedicated line for my audio system I have taken no steps regarding filtration since I have no noise issues from household appliances.
I need to get power from the wall to my system's area. So i need a power strip and an extension cord. Im trying to find out what would deliver the wall power with no change/loss to my System's area. Pretty simple really... Thanks
Im not suffering from noise really. Just want to know that my power strip that is supposed to distribute power to my system about 7-8ft. from the wall outlet is not degrading and is as good (or bad) as the wall socket itself.
I have a high quality power strip that I bought some years ago- it was being promoted by Naim at the time (though I don't own any Naim equipment). No power switch or pilot light, IEC receptacle for incoming power so you can use a higher quality power cord if you like. I can go look at the brand- it is currently in use in my vintage system.
Check out "The Cable Company". They have a lot of power distribution products. I use an Acoustic Revive in my system. It's a good one but Furutech, Oyaide, Synergistic Research, etc. also make them. Instead of an extension cord, I'd look for a power cord (on the site as well).
I have two of these: http://www.cullencable.com/111-2/ and they work just fine. With a little bit of sleuthing, you can find other brands that work as well for around the same price.
I took a look at mine - a CablePro NoiseTrapper Revelation. This is probably older than the Wiremold one? Not available any more? NoiseTrapping? I thought it was completely featureless. Oh, well. Works fine.
By far the best solution is the Magnan Audio DIY plug in capacitor bank solution. Soldering skill required. The more of these plug in capacitor banks around the house the better. And the higher the quality caps, wire and plug the better the results. Complete instructions for these DIY plug in noise filters are available over on the David Magnan website.
Wow, that brought back memories. My friend's dad, back when I was in high school, was an architect and they had this computer that used punch cards and they had to be stacked in the right order or it wouldn't work. Needless to say, I thought I was doing it right and froze the computer. My friend's dad couldn't use it for the rest of the weekend and had to wait until Monday for the tech guy to sort it out.
I would look at High Fidelity Cable conditioners and power distributors line of products. No filtering or current reduction, 30 day money back trial. I use their MC 6 Hemisphere , it replaced my PSaudio P10 . good luck
By far the best solution is the Magnan Audio DIY plug in capacitor bank solution.
Geoffy, really now. Hel-loo! Rpt Hel-loo!! Capacitor banks are not going to filter diddly on an AC branch circuit.
They are required by electrical supply utilities for power factor correction in industrial applications where large motors cause a lag in power factor due to the inductive load. The capacitors in a capacitor bank are sequentially switched in to the circuit to counter-act this by introducing a load with a leading power factor.
The above industrial scenario does not apply to residential electrical delivery systems, as there are no significant loads with apparent power phase angle lagging real power.
Wake up Geoffy and smell then ☕️. There’s no room for your science fiction unless you want to waste money and make things worse. Do yourself a favor and take a night school course in AC Electicity at your local community college. Be informed, not ignorant and jump on the knowledge 🚂 train 🚂! Toot! toot!
Yes, the PS Audio "Noise Harvester" works well for removing noise from the line as Elizabeth mentioned. If anyone is interested in more information PM me.
You might look at the PS Audio P-20 regenerator. Plenty of power out of it, and seems to be a lot of happy users so far. I use a pair of P-10's happily now, and will likely switch to the P-20 this winter. They allow 30 day trials.
I thought the OP didn’t want any filtering or regeneration. Although, the High Fidelity MC-6, Magnetic Conduction Power Distribution Block looks interesting for $999. No filters or capacitors.
I did something similar to what Elizabeth has done , I took a Hubble HG outlet strip took out the circuit breaker and rewired everything internally and externally with 10 gauge wire from Cardas and use a hospital grade plug .
The complete end solution is the PS Audio Directstream Regenerator. Comes in multiple sizes depending upon your equipment's current requirements. Zero compression & near perfect wave form. Outstanding and YES it is a huge upgrade... not a subtle "I think that sounds better" thing... Huge.
This thread has come a long way from advice for a quality power strip to now recommending $5K to $10K power stations. I wonder if the OP has tuned-out.
Edit... According to the OP’s other thread, he is looking to power tube monoblocks. I would, however, recommend power conditioning for sources. No idea what his budget is.
CK out the new PS Audio P 15 or P 20. Super clean AC with very low impedance. I think there is a trial period. Highly recommended. If price is a consideration, there are some good deals out there on a P 10. Also a dedicated 20 amp circuit or two wouldn't hurt.
After 4 different power conditioners, I went with the High Fidelity MC-6 Hemisphere. No filterring, just clean, clear, detailed & musical music with a very quiet background.
My esteemed colleague Marty DeWulf has a review of the Furutech e-TP80 power strip that I've been remiss publishing. He reviewed the hopped-up version ($2k), but the standard model starts around $800. He said it is superb and does no damage whatsoever to the power that he can discern. (He's fussy about such things too, and has generally stayed away from any kind of conditioning.) I'll publish the review soon.
You can buy excellent power cables and a power strip from Shunyata. The PS-8 or PS-12 are the strips and they have good cables. You can add noise reduction without conditioning if you wish as well.
Yup, you got your upgraded outlets, and your upgraded outlet covers. Next stop, the Graphene contact enhancer for all (rpt all) outlets, not only the audio outlets. Where does it ever end? 😳
@lowrider57..... Yep I think this thread lost OP. I don't think he had $10K power re-generators in mind when he ask for a simple solution to gaining an extra 8 ft of extension from his outlet to location of equipment. No filtering, no power conditioning or re-generation - Just "8' of Extension". As suggested - a Cullen audio grade outlet strip for about $200.00 and another $50.00 in material and 1/2 Hr. worth of work to build an audio grade ext. cord to make up the additional 4' needed.......Jim
Im reading with interest even though its indeed a whole different topic. But some info here is good and useful. The 10k power stations are not for me but a fun read nonetheless. Thanks!
a while back I needed what you want and was recommended the Wiremold ULBH6-15 from a well respected audio tech. It has a 15 ft.-14 gauge cord. hospital grade with no switches in the circuit.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
