LOL, I'll bet I gotcha on that Title! ;) BTW, I put this thread under "Tech Talk" category as it involves the system physically, not tangentially.
More seriously, two question survey:
1. Do you think designer fuses are A) a Gift to audiophiles, or B) Snake Oil
2. Have you ever tried them? Yes or No
In the tradition of such questions on Agon, I'll weigh in as we go along... Feel free to discuss and rant all you wish, but I would like to see clear answers to the questions. :)
nonoise3,375 posts05-08-2018 3:12pmkosst, What can I say to someone who knows so much, that he cannot learn any more?
It's not what you say, but what you do, go and take a course in Electronics, Ohms and the other laws, and educate yourself, then you'll understand and see the light on the BS on fuses you've been spreading.
Practice what you preach George. I don't need a course in electronics, ohms and other laws (as you like to call them) to negate the need to experiment. I don't require a safety blanket, or mommy's permission. Unlike you, I trust my ears.
kosst, How you come to your conclusions will always elude me. I don't idolize engineers so is that a bit of projection on your part? You do it so everyone else must?
Also, I could care less how adept you and George are at deciphering circuits. That is not a prerequisite to knowing what sounds good when listening.
You always resort to personal attacks on credibility so it tells me you probably had lots of explaining to do when growing up. You had to justify costs, actions, and beliefs because you had to answer to someone you feared. Don't think for a moment it will work on me.
kosst, First, that was the nicest way to say something.
Second, I do describe what I hear in the ways you recommend. Just read my take on the various fuses I've tried. The funny thing is others have derided such descriptions as over the top and unreal since how can a fuse be responsible......blah, blah, blah.
No winning for the losing, as they say. But as for technical tweaks, replacing a fuse or swapping a linear power supply board for a SMPS board is no biggie, as long as it's made for the unit and the leads match.
You don't know much about me it seems. I think it's best that way.
Your banging your head against a brick wall, they can’t see the forest through the trees, forget it, they've already lost all credibility, it’s just the way they, the "awesome foursome" roll. Even if someone like Nelson Pass himself came here and told them personally what for, "not that he would lower himself" they still wouldn’t lay down and die!
Kosst, I do see where you're coming from. Not having the necessary gear to help explain why you're hearing what you're hearing can be frustrating.
What you can extract from your adjustments makes sense but so does changing the fuse, for me. I'm talking a lower noise floor, better punch and drive, increased extension, etc. But not being technically inclined, I just forego the measurements and simply reap my rewards (which is not always the case).🤔 It took three different brands of fuses before I got what I wanted out of them. Unless I win the lottery, I'm done with fuses.
To be honest, I don't know if what I describe can be measured but it certainly can be heard. Each attribute I described can be considered small, ion their own, but add all of them up and it can be a big improvement, insofar as it greatly increases the appreciation factor.
As for George, he's not the best person to have on your side. He tends to dog pile on after having someone else go first. He can hold you back.
kosst, I hear you. I can't afford to buy any of the more expensive fuses either, but then, I can't convert any amp to full dual mono either. Seems like $30 was the right amount to spend for me.
Imo it is irrelevant to reference DIY or Mods as an argument that aftermarket fuses are without merit. The question was not fuses in comparison to DIY and Mods, but in comparison to stock fuses. Obviously, modded gear would benefit similarly from aftermarket fuses.
I guess the premium designers and manufacturers don't know what they are doing when they use subjective listening as their final step in tuning a design. Some of the assertions here are ludicrous and show profound ignorance of the industry activity. :(
Kosst. What you say about value of engineering makes a lot of sense tbh. And I can see a solid thought process in there.
Now though, and not wishing to be antagonistic here,but just HOW have all the aftermarket fuse manufacturer achieved the sales they have worldwide? I mean it can’t be mass hypnosis or just thousands of gullible buyers, not even the most ardent naysayer can truly believe or propose that.
Mercedes have been winning F1 championships with Lewis Hamilton and after market fuses. Lewis only pits for fuel, tires or after market specialty fuses. They have Bayesian computer algorithms to determine which fuses to use and when. Some fuses work well in the wet and some are better at higher altitude and some will lower the aerodynamic drag of the vehicle, others are excellent for braking. Fuses are so important they call it F1.
Kosst I would agree that the number of aftermarket fuse users is indeed small, tens of thousands as you say. However it is not in a market of tens of millions that they should be related to. Those tens of millions are NOT high end audiophiles. That group number significantly less and dwindling every day unfortunately. The tens of millions include appliances and applications that have no relation to high end audio at all. Tbh I really do not know what the number of audiophiles would be worldwide, I do not believe would number tens of millions at all but I do not have that data to hand. As far as perception of reality, I would need a few more drinks before entering that arena.
I understand people who do not believe fuses make any difference and I understand trying to ask for "measured proof". However, I do not think it's cool at all make it one's mission to ensure any new users are discouraged from the idea of trying aftermarket fuses at all. That's almost like a "religious extremist" attitude. If you have not actually sat down and listened to different aftermarket fuses, I really don't think you have any real objectivity to say that "fuses do not make any difference at all". For those who have actually listening to fuses, I think I have seen exactly ONE user who posted that they could not hear any difference (which is totally fine!). All other people on here that have actually experimented with fuses have posted that they do, indeed, hear differences (whether it is positive or negative for them). There is definitely an electrical character that happens with fuses, since they are inline to transfer current/electricity. The same goes for power cords, interconnect, speaker wire. I think there are definitely a few things about fuses that can dictate how the end-result sound is:
- conductor material, such as silver, gold, copper, and tin can contribute to the character of sound (just like power cord material).
- conductor / end-cap plating (such as gold-plating, silver-plating, rhodium plating). Just like power cords, this can influence sound from A/C current.
- internal conductor material / damping (such as filler material or liquid - like beeswax or power type filler). This helps reduce electrical resonance that happens on that very small wire. The glass tube or ceramic tube can also affect electrical resonance.
The above points can probably be measured in some way (there is definitely measured results on the conductivity of different materials such as copper/silver/rhodium). Though, I'm not sure anyone will really sit down and actually do these types of measurements on fuses because, at this point, it doesn't really have any fiscal value to do. There is no "return on investment" to spends thousands or tens of thousands to do these level of tests.
As far as cost is concerned, it's all about perceived value and "what the market will bear". In my testing, I definitely have no problems spending $60 on a fuse upgrade. I'm not to the point where I want to put $150 on a Synergistic BLUE, but many others have and love their fuse. Though, I can understand other points of view. Just like why a person would drop 6 grand on a Rolex watch when you can spend a few hundred to get a nice item that does the same thing.
and that now sounds like a troll message. Anyways....if you feel that we are the religious zealots, that is interesting because we are only responding to your "attacks" saying that we are completely wrong in our objectivity and results -- where you have not even listened to an upgrade fuse.
1" of A/C circuit is important, especially when the conductor is going to be a really thin wire somewhere between 20awg and 26awg that is typically non-damped and tensioned in air (which will have electrical mechanical resonance just like a guitar string would when plucked).
I can even tell differences when using the larger 10 amp type fuses with the thicker/higher awg conductors. I just recently went through an exercise comparing big 10A fuses in a receiver (Hi-Fi Tuning Silverstar, Hi-Fi Tuning Supreme, Furutech, stock). All the 10A fuses still had different sonic signatures. The differences were drastic enough where it sounded like completely different amplifiers.
There are definitely other areas which affect sound, like power cord connectors. If you look at a standard IEC connector, there really is only about 1" of conductor as well, but there is an audible difference between an IEC connector with gold-plated conductors and silver or rhodium plated conductors.
Same thing occurs with RCA connectors (another element that is less than 1" long!). There is a definite audible difference between an gold-plated copper RCA plug and a solid pure silver RCA plug.
Costco-emoji, I hate to judge before all the facts are in but you seem to not know what empirical evidence even is. Empirical evidence is that evidence gathered from observation. You know, like listening. We observe with our senses. Our sense of touch, hearing, vision, etc. You seem to dismiss listening as proper evidence as if nobody can hear, as if everyone is always fooled, as if everyone in the world is deluded except you.
Dude, wake up and smell the coffee! ☕️ In a hobby that is all about listening and being able to distinguish subtle differences in sound your persistent and vociferous claims that these sensory abilities should be ignored or don’t exist come across as well, rather bizarre. That you would engage in such an angry and angst ridden campaign against fuses and other controversial tweaks seems, well, kind of neurotic.
Nobody is obligated to accept the empirical observations of others. When that does not happen, something is awry and someone should do something about it if they really care. Brow beating someone probably won't help.
Agreed Mapman. But on the flipside nobody should fly off the handle just because they do not like the other parties observations either. Needs to be a lot of give and take, something that is sadly lacking at times here with certain members.
On the dodgy subject of empirical evidence, Exhibit A from somewhere in cyberspace is presented below. “Only quote facts.”
“Empirical evidence is information that verifies the truth ( which accurately corresponds to reality) or falsity (inaccuracy) of a claim. In the empiricist view, one can claim to have knowledge only when based on empirical evidence (although some empiricists believe that there are other ways of gaining knowledge). This stands in contrast to the rationalist view under which reason or reflection alone is considered evidence for the truth or falsity of some propositions.[2] Empirical evidence is information acquired by observation or experimentation. This data is recorded and analyzed by scientists. This is the primary source of empirical evidence. Secondary sources describe, discuss, interpret, comment upon, analyze, evaluate, summarize, and process primary sources. Secondary source materials can be articles in newspapers or popular magazines, book or movie reviews, or articles found in scholarly journals that discuss or evaluate someone else’s original research.[2]”
To make matters considerably worse for the oft obstreperous died-in-the-wool naysayers, in the case of fuses we have both observational AND experimentational evidence. Sweet! So, It certainly appears there’s a whole lot of denial going on here.
1. Do you think designer fuses are A) a Gift to audiophiles, or B) Snake Oil
answer: c) somewhere in the middle. Expensive to be called a gift. Also it is not even of any value to talk in general about sound quality of "designer" fuses. That means just appearing fancy and being expensive. I do think some fuses work better than others and there are many that work extremely well that are not "designer". There is a definite snake oil factor. There are rational ways to choose a fuse like any other electrical component. You can choose just because you believe nothing more.
TBH I hate the term designer fuses or boutique fuses and would never refer to them as such Aftermarket fuses is my term of choice.
I honestly cannot say as I have tested differing brands of said fuses so really cannot comment, maybe one day when I am really bored I may try one of these honey filled confectionary ones, sorry mean AM Beeswax just to see.
The only snake oil factor I have ever seen or heard about comes from the abject naysayers.......
mapman 1. Do you think designer fuses are A) a Gift to audiophiles, or B) Snake Oil
answer: c) somewhere in the middle. Expensive to be called a gift. Also it is not even of any value to talk in general about sound quality of "designer" fuses. That means just appearing fancy and being expensive. I do think some fuses work better than others and there are many that work extremely well that are not "designer". There is a definite snake oil factor. There are rational ways to choose a fuse like any other electrical component. You can choose just because you believe nothing more.
2. Have you ever tried them? Yes or No
Yes.
Well, they can’t be much of a gift if you can’t hear them. It’s much better in cases like that to use an inexpensive Littlefuse or Busman fuse and be dine with it. Audio Nervosa is not good for anyone. How do you know if some fuses work better than others if you can’t hear them?
Empirical evidence, also known as sensory experience, is the information received by means of the senses, particularly by observation and documentation of patterns and behavior through experimentation. The term comes from the Greek word for experience, ἐμπειρία (empeiría).Empirical evidence - Wikipedia
Kosst Likely nobody has questioned your assertion about the failing of the power supply as nobody really desires any further fruitless and pointless arguements.
Carry on with your mischaracterizations, conflating of terms, and misunderstandings....
But kosst, that is precisely what you just did when you said:
By definition, empirical measurements require the use of a commonly accepted scale of some weight or measure. Therefore, no listening test can be empirical. Without some empirical scale, the "listening measurement" (a true oxy-moron) is purely subjective
You don't get to rewrite or revise the meaning of words to suit your purposes. That's sophistry 101. We know better. Stop talking down to us. You were doing fine there, for awhile.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.