@cleeds
I believe you are correct sir!
How Long Is Too Long?
I know this forum has tons of experience with all things audio.
My question to the members is when you send a piece of gear to the manufacturer for repair; what is a reasonable turnaround time?
I will leave the "company" out for now because I don't want to potentially hurt their business if it's not warranted.
I sent my phono pre and step up device in for repairs four months ago. It's a small one man operation in California. Around the time I sent them in, one of his products got a small positive review in Stereophile magazine and he said that since then he's been swamped with orders. Understandable I guess and good for him. Not so good for me though.
As I said, I haven't seen my equipment in four months. Is this considered reasonable? I called him about a month ago and talked to him directly and he assured me that he would get to my equipment soon. So far, nothing. I guess I should have asked what his definition of "soon" is.
I'm happy that he's selling units and business has picked up for him but with his new found success it appears like us early supporters are being left out in the cold.
I know my hands are tied at this point and I do have a back up phono pre of lower cost and quality so I haven't been without the ability to play records.
I appreciate any thoughts or advice.
Thanks,
Nick
@cleedsI believe you are correct sir! |
I'm trying to get in touch with him today and if I can't get any satisfaction I will reveal the name of the product. I didn't want to come off as one of those vindictive types that come to the forum to soil a company's name because I had a bad experience. I wanted to make sure that others feel as I do and believe that I've shown enough patience. Before his product got a boost from the Stereophile review, he was great to deal with. Now ... maybe not so much. We'll see. |
cleeds,Yes, it certainly appears that way. I was trying to give him the benefit of the doubt. I appreciate that he doesn't charge for repairs as he "stands by his product". I would prefer to pay for the repairs and get my gear back in a reasonable amount of time. I'm 64 and life's too short. |
I personally am sick of the terrible customer service we are receiving from a lot of companies these days. They can't blame covid anymore, it is just bad business! Please state the name of the product, so we can all learn to avoid this company. That is the only way these companies will wake up and treat customers right. ozzy |
Nothing but good things to say about PS Audio: I bought one of their power conditioners and didn't like it. Great customer service and they even sent me a retun label so I didn't have to pay for the return shipping. Recieved the refund quickly and all went smooth. I would feel comfortable buying from them again. |
Post removed |
in my case I recently bought a pre amp. the company (withheld) has supply issues and the outward case has not been delivered. It's been two month in the waiting. This may be the case with you. I don't know the details but if you talk to the owner, you can get a better idea of what's going on and their character.. Good luck. |
Good advice and I have been thinking along those lines as well. I said earlier that I have been casually looking at other phono pre's on this site and USaudiomart.. You brought up a good point that what happens if I need to send them back for some other reason? I have to wait at least another 4 months? No. I'll give him a call and if I don't feel good about his response then I'm not opposed to posting the name of the company. I alluded to the fact that these are not in the same class as say, Quicksilver. Total cost for both units new today would be $827 not including shipping and tax.
|
That is appalling. 4 months is way too long to wait for service. Sounds like he does not have the business sense to recognize the fact that servicing a previous customer is at least as important as profits from new sales. Personally, I would move on,,, what will you do if it requires service again? I’m in this hobby for enjoyment, not frustration. We are lucky we have options...there are lots of wonderful phono stages out there. Buy yourself a new one and when this finally gets fixed and sent back to you, sell it. If there is lots of demand now because of a positive review, it should be easy to sell. If it were me, I’d have no qualms with posting the company name on this forum. Could help forum members contemplating a purchase. Might even speed up the repair if the company owner gets wind of the bad service review. |
Four months is definitely too long.... but you have done it so you are going to have to live with it and your backup phono preamp will have to do. I would give him another call but be nice or you will never get it back and in the mean time look for another reliable tech to use next time. I think we all have had similar experiences with different things. |
@nicktheknife what company? what piece of gear? |
It’s always difficult to get a small operator to do a job that is free (even if he’s the one who set the price) when paying jobs are lined up. It shouldn’t be that way, but it is. I remember (30+ yrs ago) paying a remodeling contractor when half a day’s work remained. The only way to get him to finish was a lawyer’s letter. I’m not suggesting you do that in your case. I wish you best of luck, and I hope it gets done soon. |
A new customer waiting on delivery can wait longer than an established customer waiting for service, as long as expectations are properly set for the new customer. Under promise/over deliver. Perhaps has his priorities mixed up. Maybe because he needs the revenue, or just doesn't understand this fundamental; a customer service issue is an opportunity if you handle it correctly.
|
It is unfortunate that magazine reviewers, Youtube reviewers and other industry types fail to address this matter when they provide a review. Before the purchase. Unless parts are from China, 30 days should be the max. Uptone Audio performed a same day repair for me-I dropped the product-.Thanks Alex! |
@ ozzy, Yeah, no matter what the excuse is, it appears we’re at the mercy of the manufacturer. I guess we can only hope that we get our problems or issues resolved in a reasonable amount of time. When I spoke to the guy, he said he wasn’t even answering emails any more because he felt like he was just getting "feelers" and he didn’t have the time to respond. I get it. When you’re pretty much a one man operation, time can’t be wasted on conversing with potential customers. Oddly enough, the few times I talked to him on the phone I had to cut him off because he just kept on rambling. I should have told him, "Hey, a little less talk and just fix my gear please". LOL! |
Yeah, I wasn't as kindly as I could've been when, talking about Quicksilver tube reliability in another thread, I complained about the unreliability of the tubes used in my Quicksilver Mono Amps. I have to say, though, that at that time Quicksilver was a truly a tiny company. I would actually go to Sanders' house and he'd personally deal with my problems, then and there. Ya' couldn't get much better service than that! |
@ mike_in_nc, I get what you are saying and as I said, I gave him a call. He said he was swamped due to a big influx of orders but at some point you have to take care of your customers who already bought and own a piece of your equipment. Especially if it is in need of repair due to parts failure which I believe is the problem after talking to the owner/designer/builder. He admitted as such. |
Whenever one deals with a small outfit, especially a one-man shop, there are potential issues different from those encountered when dealing with a larger firm such as NAD or Bryston. One often gets cordial and personal service (which Bryston also nails) but what if the owner gets sick? gets busy? dies? loses the main technician? In those cases, long delays occur and in the extreme, there is no support at all and a product can become unrepairable. Balancing the risks can be substantial rewards. One might get a fine product at lower price, a product that can’t be had any other way, and one that brings joy over a long period. |
@yogiboy and QS is a great little company. |
@ yogiboy,Fortunately, my phono pre is not in the same class as yours. I would be really pissed if it was and I had to wait so long. LOL! |
@ jasonbourne71,No, I don't have to pay for the repairs. That's good I guess but the question now is, is it worth it? I've been casually looking at used phono pre's on this site and USAudiomart as I may just write it off as a loss until I get it back and then I can decide if I want to sell it or not.. |