Vandersteen VLR designed for exactly that instalation , easy load, flat to something crazy like 47 hz and integrate very well with unique Vandersteen powered subwoofers, so you have some system growth options read the reviews and go listen, made and designed in USA and KEF LS50 and Sonus Faber and.....
disclaimer happy Vandersteen owner but i have other gear as well...
Not a 100% written in speaker design laws. But mounting on a shelf or sideboard, usually means your going to get some bass loading addition because of close proximity to walls, corners or the sideboard itself. Because of this I would look more to speakers that are infinite baffle design (sealed enclosure) not ported, as these will help keep the added bass bloom down.
The Wilson Audio Duette was designed for bookshelf and stand. These are the BEST sounding bookshelf speakers I have heard period. But they are very pricey.
Or IsoAcoustics pucks if space is even tighter. I had them before and the improvement, compared to putting the speakers directly on the console, was noticeable.
Another vote for Tetra 120u. My first decent speakers. Sound great on stands, great on maple plinths on the floor, and I currently have them on their sides on a shelf. Stands sound best but very good sound on a shelf.
Signature Ones will not work well in a tight space. Totem recommends a minimum of 1 foot from rear walls but anyone that's owned Model Ones knows they need at least 2-4 feet.
In this same situation I have used both Rogers LS3/5a (also available from other manufacturers as noted by yogiboy) and Allison CD-6 (available on the used market from time to time, but you must be patient). Price points are very different including the variations of the LS3/5a. ZuAudio also makes a couple of speakers for this purpose - Cube and OmenBookshelf; but I have not heard either of these.
The LS3/5a and its successors have been the classic choice. For years I happily used the LS3/5a as my desktop speaker, and only recently replaced it by the far superior Harbeth P3ESR. Both of them have suffered a bit from bass boost as a result of the proximity of the desktop surface. I have cured most of this by raising them some 8 inches using little isoacoustics stands. In my case that had the additional advantage of bringing the tweeter up to ear height. The remaining lump I cured with an equalization graph in REW and uploading that into the Equalizer APO software on my desktop PC (used as a source). Traditional tone controls will also do this, to some extent, and not as precisely. I do not think you can avoid using a bit of equalization, and the more precise the better. But with it, you should be fine.
My room is the same as yours. I am using a Pass labs integrated mated to NHT c-1. These are very small and sealed. I am also using a Bowers and Wilkins DB3D sub. Speakers are mounted on the wall and my room is treated. I can tell you that there are not many full size speakers that sound better. I have been into audio since I was 12 (73 now) and I have the best sound I have ever owned. I’ve owned NHT 3.3’s and Krell.
My room is the same as yours. I am using a Pass labs integrated mated to NHT c-1. These are very small and sealed. I am also using a Bowers and Wilkins DB3D sub. Speakers are mounted on the wall and my room is treated. I can tell you that there are not many full size speakers that sound better. I have been into audio since I was 12 (73 now) and I have the best sound I have ever owned. I’ve owned NHT 3.3’s and Krell.
I have some Totem Model 1 Signature speakers. Original owner.
Includes two Totem Signature main speakers, a center channel, and standard model 1s too.
Initially they were used for reference validation, and now saved for a future 2nd den room reference system. I used them a few times to compare to my own custom build speakers to see how far off track I get on my own builds. While I don’t use them much any more, and may sell them soon, I tested them recently on a shelf setup and was surprised recalling once again how great these speakers really are. Had forgotten, they are amazing...
They primarily sit on 6" tall metal stands on a side shelf, about 1.5ft from the wall, or sit on 24" stands about 9’ apart. Sound great in either case with my 10w tube amp or my 200w solid state amp. Totems are a real treat.
These bokshelves are ideal for close placement to back walls: they even have OEM brackets available as inexpensive accessories for mounting on the wall.
"..... The Rega R1 becomes my new budget reference speaker. In addition of its ability to get the fundamentals of music right, it adds clarity and resolution, and an ability to lay out a vivid and coherent 3-dimensional stereo image. In small room applications, what more could you want?...."
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
