New McIntosh MA252

I owned a MA6500 two years ago and loved it, btw, the 6500 is rated at 120 watts (8 ohms) It was the MA6900 that is 200 watts. The 252 is rated at 100 watts 8 ohm but to me sounds more robust than the 6500. Plus the soundstage and depth of the 252 is superior.
Loved the 6500, love the 252 more.

Sounds good with my JBL 4312 SE
https://1drv.ms/u/s!AnTgSj_4fLBsjAWPBO72EsbFmjWT

I have listened to the MA 252 in two systems and I would strongly lean toward it if in the market for an integrated

Has anyone compared the MA252 to the Audio Research VSi75? Both are on my shopping list but cannot audition as I live on Vancouver Island.

I am planning to get a Sonus Faber Serafino. Currently using Primaluna prologue premium with martin logan bookshelf. 

I listen mostly to classical, Jazz and lots of vocal. I have enjoyed so far with Primaluna tubes but can't use it for the Sonus Faber Serafino. 

Will McIntosh MA252 be sufficient enough to drive the Serafino or should i get MA352? Will i get the warmth of the tubes in MA352?

I'm looking at this amp as I'm thinking of reconfiguring my audio listening room. I have ZU omen Defs. I've been going back and forth on various forums about amps to go with my PS Audio BHK preamp. I was considering a hybrid BHK250. Benchmark AHB2, Quicksilvers, MC275, etc.

However, chatting with someone who asked why not go with the Macintosh Hybrid integrated for $3600? 100 wpc is more than enough. It has a sub out (I use subs with my zus), remote and tube preamp. 

I could almost even trade my BHK for the entire unit. This might be something to think about

Via a bunch of web research I am narrowing it down to a Mcintosh MA252 or Arcam A49, does anyone have any advice or ideas?

I’ve had the MA252 for 10 months, and I also own the Arcam A39 which it replaced. I’m surprised to hear that some feel there is no "tube" signature. It was obvious to me the moment I switched over. I’m using some 10 guage, stranded speaker cables from the old days and it sounds just lovely. Just enough slam but also the solid state smoothness and control. It is not a Line Magnetic which I also demoed. That had incredible sonic tube brilliance, but I felt maybe just a bit much for me every day.

Welcome to the forum!

I have no experience with Arcam products but my MA252 works great with my Harbeth C7ES3s. 

No regrets here.

I'm using an Anthem receiver with some Focal speakers and need to upgrade to an integrated amp to get the best out of them.

Via a bunch of web research I am narrowing it down to a Mcintosh MA252 or Arcam A49, does anyone have any advice or ideas?

I bought an MA252 last Saturday and I absolutely love it. Previously I was using a Bryston 4B and Mirage M1s. I got new GoldenEar Triton 1 speakers at the same time. The amp does have a somewhat more warm tone than the Bryston but I can't really make a comparison because I haven't use it with the M1s. I have read some comments dissing the Mc sound but for me it is perfect and combined with the Tritons I think the overall sound is very good. If you don't require gobs of power then I would seriously consider this Mc.

The 2275 was beautiful, sound quality, not so much. It was not even close to the 275 and it should have been so much better.  It just wasnt....something got lost during the design phase.

If I were going to be swayed by a McIntosh tube integrated it’d be the MA2275. But really it’s too big, heavy and expensive, not to mention I’ve foresworn valve amplification for the duration. I’ll stick with SS.

But that 2275 is a beaut.
http://www.hifi-review.com/images/archive/mcintosh-ma2275_550.jpg

I had a MA252 in my bedroom system; and ultimately sold it off. I found it harsh on the top end and rather harsh sounding with my Focal Electra 1028s; my older MA7900 sounds fantastic with them .. may be the hours on it, or the output transformers etc., but its a very different sound. I also have a PrimaLuna EVO400 with KT150s.. saw PL mentioned above.. its a wholly different animal.. very 'tube' as its a real full tube amp. the MA252 is tube on input stage only and I for one, didn't really feel it made any difference; not mention the silly green LED lights. 

I have a McIntosh C2500/MC452 driving a pair of Focal Sopra No2 speakers.  In my search for those speakers I found that many of the amplifiers didn't pair well with the Sopra's, especially with their tweeters, but the smoothness of the "McIntosh house sound" paired really well with those speakers.

One of my audio buddies, a guy whose opinions I respect, recently auditioned one of the new Focal Kanta's with the MA252 and was very positive on how those two paired.

I suspect that McIntosh will sell tons of those MA252's, nice unit, great looks and (for McIntosh) a more affordable price!

This 252 is a marvel - loved every bit of it. 
Changed my brystons to all Mc with no regrets. My current setup is MB50, D150 and MA252. Its jaw dropping. Drives my power hungry VA Strauss tower speakers at 90% on 14X21 listening room - without a hiccup, just pure musicality being portrayed. It sounded a real orchestra, like my sons orchestra in HS. The D150 serves as a DAC and made a huge improvement - smoother, warmer and more air - real music. IC’s and speaker cables are all nordost red dawns. By the way I sold my 402 and returned my 601’s - not worth the price difference compared to the 252. Just my honest opinion. Happy listening 

I tried it with Focal Kanta 2's.  It's all solid state sound.  Even the dealer said he thinks they just put the tubes in there for looks.

I was going to suggest that you pop the top off yourself but I didn't know if you'd be comfortable doing that. I'm glad that you were able to take care of it yourself and won't be losing sleep over it tonight. :-D

Thanks for the input route-66.  I contacted McIntosh and they directed me to a local technician.  I was going to call him but decided to take a peek under the hood.  It was simple.  The nut that should have been "squishing" the lock washer, was almost at the end of the bolt.  Probably another rotation and a half and the nut would have fallen off.  So a 9mm ratchet did the trick.  All is good.

I remember reading in the MA252 manual about giving the speaker terminal nut an extra quarter turn after snugging it up but I didn't want to force it, so I left it like that. If I were in your shoes and it bothered me that much, I'd contact McIntosh to see if they've dealt with this before. The only issue I would wonder about is if the terminal needs to be tightly bonded to the chassis for grounding purposes.

New member and first post.  

I've had mine for a month or so and I'm so impressed with it.  I sold a Musical Fidelity A5.5, which I really enjoyed, and I have no regrets.  Originally I was using a pair of Tannoy Precision 6.2 LE (mass loaded), which sounded wonderful but I just upgraded to a pair of Focal Aria 926.  Wow, I'm blown away.  I have no complaints.  The Arias have such a balanced sound, a little more than the Tannoys. I find the Tannoys needed a precise seating position to get that sweet spot and the Arias don't demand this.  The main difference, imho, is the bass. The Tannoys impressed me with its bass, when I first go them, but with the Arias there is simply no comparison.  Lower and tighter... Jazz bass lines wound so authentic, and this is coming from a musician for over 30 years.

For those who own the MA252, I have a question.  My Cardas cross speaker cables have spades that are too narrow to fit onto the Mac's posts.  So I purchased Cardas locking banana plugs, which work wonderfully.  What quality!  But in order to use the banana plugs I had to follow the MAC instructions which states you need to: finger tighten the post, then using the MAC wrench turn another 1/4 turn.. or 90 degrees.  I did this for all 4 posts, however one of them seemed to have "let go".  What I mean is that now when I want to loosen the post, the entire post is coming out, which will no longer allow spade use.  The other posts work like they're suppose to.  I've tested the speakers, one side with the other, and I don't hear any difference.  Is there something that I can do if I pop the cover off?  It doesn't affect the speaker so I guess I can leave it that way, but it is really bothering me.  

Any constructive thoughts?  Thanks everyone.

Congrats on taking the plunge! I've been living with my MA252 for almost a year now and I couldn't be happier with it.

I did  research/read many posts and reviews about ma252 on internet including this forum.
Finally I just brought one home last Friday. Only I can say is 'Wow'.
It's paired with B&W 805 with sub. It makes perfect harmony with my speakers and fill my listening room with beautiful sound. Its sound is definitely different from full solid state/tube amp, but it matches with my sound preference with my rest of system. 
Thank you so much for all comments on this thread. It helped me a lot. 

Hey donjr,

yes, simple and elegant. But I’m gonna miss those big baby blues and a separate button or knob for each function. But overall, incredible sounding, like they figured out how to put more music in there than the original recording. Actually, just great to hear so much fullness and clarity from the same Music you’ve heard so many times!! 

teboerio

I've heard the MA252 a few times and really enjoyed it each time. I know this doesn't matter but talk about eye candy. To have a piece of audio jewelry sound that good is a win win IMHO. I've always wanted a second integrated amp and this would be a serious contender. Congratulations.

Well, I did it. Bought the MA252 on 12/26/18 at full retail. Saved $500 on the Jan 1, 2019 price hike. 

I’m currently just listening to my Sonus Fabrer Olympica l’s (just moved to a new house and the lll’s are still in boxes in the garage). 

I do have a new old favorite Neil Young album “Live at Massey Hall” recorded circa 1971. This album played through my SONY 300 CD player sounded really,  really good with my just returned refurbished MA6500 straight from Binghamton. (Need plenty of shuffled choices from Beatles to Stones to Tull to Nilsson to Russell to Pink Martini, to classical, jazz, Sinatra, Cole, Martin, Nina Simone and have no patience to change discs constantly.) 

Well - the MA252 grabbed Neil and his guitar out of somewhere in the room and off the stage and set him down right in front of me, couldn’t have been more than 6 feet away. 

The difference in clarity, presence, high frequencies, and bass response with all tone controls set flat is not to be believed. I normally always kept the MA6500 “Loud” button on at low to moderate volume levels to fill out the sound in the room. Absolutely not needed with the MA252. 

Now, I’ll have to wonder if it’s those little tubes or simply 20+ years of newer technology. 

Nevermind, after no more than ten minutes listening to the MA252, I’ll never look back. Look for the refurbished MA6500 for sale on this site soon. 

PS - the new MA252 almost seems a little too bright, too near. I’ll get use to it!

teboerio

I was curious about the MM Phono Input. I currently am running a Hegel amp, Pro-Ject Debut, and new B&W 707 S2's.

I wanted to upgrade my turntable to a Rega P6 with the Ania MC cartridge. But I noticed the MA252 has a MM Phono Preamp.

Should I get a P6 with MM cartridge instead then? Otherwise I have to buy a whole other MC phono preamp. And why didn't McIntosh build this in? I noticed the McIntosh MT2 & MT5 are MC, so you can't even connect those out of the box to the MA252.

Any other folks have updates here? The MA6500 has been a great amp and I’ve no need to move on from it, but that tube glow is calling to me..

Have had my MA 252 since February (my 50th birthday gift!) As an audiophile with discerning taste I will say that my baby blows most other integrated amps away with its pure clean analogue...to say this little amp with it’s beautiful green glowing tubes is worth every penny and is a beautiful addition to our audio gear is an understatement...nicely paired with Focal 836s, Chord Qutest DAC, Rega p6 with Hana EL cart (using a Rega MC phono but the on board phono stage is terrific....have done some reference testing with MM) and RB 330 arm, Cambridge CXN, lovely Nordost Silver Shadow IC...nice to look at, beautiful sound

Has anybody compared the 252 to any of the “top dog” solid state integrateds from Mc, such as the MA8900 or 7900 or 8000, etc.? Not features-wise, as I realize the 252 does not have a Dac, HT passthrough, etc., but exclusively sound-wise.

I have been using a Counterpoint SA 3.1 preamp/Adcom GFA-555 power amp combination in my system since the late 80's (!!) and was long overdo for an upgrade. I recently purchased an MA252 and for me, the improvement is a revelation. I can finally understand what reviewers mean when they describe things such as hearing "space around the instruments" and there being a "black background."  This integrated amp is so much more musical than what I've been listening to (or suffering with) for all these years. 

Auditioned the MA252 driving a pair of Harbeth 3.1s (wish they would have set them up with the 3.2s) at Overture in DE and it was delightful. My best description would be that the combination was very musical and got the RP&T near perfect. On complex orchestral music the speakers got a bit congested in the lower-mids (the reason I wish they would have set up with a pair of 3.2s). Next step is find a way to audition at home. At least it is small enough that dragging one home to try won't dislocate a shoulder.

Placed my new MA-252 into service last week.
Extremely nice integrated amp.
I had a Prima Luna Dialogue Premium HP, and although both are fine sounding integrated, I prefer the MA-252.  
The Prima Luna had NOS Mullard tubes - with the stock tubes, I preferred the Mc even greater.
The bass is tighter and fuller with the Mc, and the overall sound a bit more balanced. 
Plenty of detail, without sounding analytical. Vocals sound "human" - you feel the emotion of the artist. The Mc pulls you into the music. Before you realize it, you are toe tapping and humming along - pure enjoyment, but not for someone looking to analyze every last detail.
Produces significantly less heat than the Prima Luna.
Enough power for my Maggie .7s  

 I realize it’s more complicated than I assumed, and involves transporting & maneuvering a 64lb chunk into your setup. 
You just got the MA 252!
Please let us know if you ompare them down the road.
Thanks for sharing your experience with the new amp- it looks to be a very high sonic value and a beauty to boot.

@returnmusic - that's a real tough question.  I have the MA252 in my office and the PrimaLuna in my living room at home so it would difficult to declare a winner.  

Thus far, they are both very much at the same level of sonic performance.  Perhaps I will bring the MA252 home one day for a shoot-out.  

You cannot go wrong with either one!

Greginnh-
How do you think the MA-252 compares to the PrimaLuna Dialogue Premium?
Thanks

The MA-252 is an intriguing option, no question. At $3500 it is tempting since I’ve been having issues finding an appropriately priced balanced preamp for my Merrill Audio Thor amps which power my inefficient but incredibly revealing ATC SCM 19v2’s.

For those that have used the MA-252, are the 100watts/ch the typical conservatively rated watts one hears about from McIntosh? I’m not against stepping down in watts as I rarely listen above 85-90dB as it isn’t townhouse neighbor friendly to do so. Rogue Audio’s RH-5 fits my price point to add in front of the Thor’s, so that’s the competition. I have a fair offer on the Thors, so the MA-252 is in the ballpark of affordability for me too.

Regardless of what I do, I think it’s a lovely integrated, one I think would have high WAF as well in even the most discerning of homes.

I’ve owned an MA6500 used with Olympica I’s and it was an excellent combination. Not sure I’d use the MA252 with the Olympica III’s, at least not without some major demo time at a dealer. I’m currently running the MA252 (and a PS Audio DSD) with a pair of B&W 706 S2s and a Sumiko S.5 sub. Again, an excellent combination. The hybrid design of the integrated has been beautifully executed by Mac, and the build quality is classic Mac as well. I first experienced a hybrid design in the PS Audio BHK250 power amp whose performance is truly amazing!! But at 82 lbs., it was a problem for my 68 year old back. Nevertheless, refusing to admit my limitations, I was about to add the PS Audio tube preamp to my system when Mac introduced the 252 integrated. Influenced by pain (or pain pills), I decided to give it a go. While I LOVED the BHK250, I have had no regrets going to a less powerful amp. I’m still getting tube goodness in my system and at only 27 lbs. As with any piece of gear, matching is critical. Cheers.

For the price and features, it’s going to be hard to beat.  Smart move on the part of McIntosh as this unit will serve as a great entry point for folks to get hooked on the brand. 

I guess I was lucky walking into Overture Audio in Wilmington, DE and walking out with one. They just had 5 delivered and by noon on that Saturday they already sold 3. That was early February.

As for the sound and looks, I am quite happy with it! 

Congrats on finding one on the used market already!

I thought it would have been years before we saw any preowned MA252s for sale.

I got a used one. It looks new though so no wait!  I sold my Accuphase E-600 as it was overkill for an office rig.  

The tube front end certainly creates some warmth and magic compared to 100% ss.  

I purchased a Plinius 980 last week as well (I had committed to purchase it literally hours before the call came in that a used 252 had arrived) so I compared the two.  The 252 was much more enjoyable. 

I’m most interested In your comparison to a ss amp. Maybe you were prev using a ss amp in your office. I’m using a MA-6500 that produces about 160 watts at 4 ohms and wonder if the preamp tunes in MA-252 produce a fuller warmer richer more detailed sound.  That’s not asking too much, right? 

Can you tell us how long you had to wait for it?

I'm asking because I gave my dealer a deposit for one on Wednesday and he placed my order that day.

I just received mine yesterday, using it in my office rig.  I am very impressed with build and sound quality.  When I get around to it, I will compare it with my PrimaLuna Dialogue Premium integrated. 

I can't compare it to any other mac gear but I thought it sounded great connected to a pair of Sonus Faber Vener's (I believe they were). My friend who owns a shop told me that the MA252 is really hard to get your hands on right now. It's such a gorgeous amp you find yourself standing close to it for a bit. He had me sit in the sweet spot while he played some Peter Gabriel for me and I could easily live with it. I don't know any specs and was just dropping by to say hello and price an Accuphase CD player. I think it's going to be a huge seller for McIntosh. It's a great entry into the higher end and if I owned one and wanted to upgrade I would not sell but move to another room or cottage.

It seems to use the SS amp section of the MA6300 w/ a tube preamp