Thanks knghifi :-)
Has anyone tried these stunning new CPT power cord?
Considering the many, many brands of power cords I've tried in my very well accomplished high-end system, I have never been so impacted by these Core Power Technology power cords. Within a very short period(15-20) minutes my system literally came alive. Soundstage opened wider and deeper. The background became dead silent, space between instruments and stage members were more focused and everything sounded cleaner and musical than ever. My highs had a glorious crispness and symbols shimmered. Midrange through my 2" horn became more dynamic and punchy. My 15" bass driver tightened and dug low with great control. My Rel G1 which is a fabulous sub on its own but with a CPT 150 on it is another story. Running high pass from my sub to my Audiozen Noah amplifier, music depth is just stunning. Lower end bass is authoritative and clean with solid grip and impact.
My experience with these power cords is truly magical. The scary part of the above is I only have one 150 on my sub and one 300 from my wall to my 6 outlet bar. I still need 3 more to complete my system. I could just imagine the level after that...In closing, I cannot emphasize enough to try one of these in your system. I CANNOT and WIIL NOT take these out as they are that good. But hold your jaw, cuz what you've been listening to will just become real after Core Power Technologies.
Cheers....and let the tapping begin.......
My experience with these power cords is truly magical. The scary part of the above is I only have one 150 on my sub and one 300 from my wall to my 6 outlet bar. I still need 3 more to complete my system. I could just imagine the level after that...In closing, I cannot emphasize enough to try one of these in your system. I CANNOT and WIIL NOT take these out as they are that good. But hold your jaw, cuz what you've been listening to will just become real after Core Power Technologies.
Cheers....and let the tapping begin.......
1,859 responses Add your response
I use Paul Speltz (ANTICABLES) Reference 6.2 ICs, Reference Level 5 speaker cables and Level 3 power cords in my system and am highly enthusiastic about the results. The ANTICABLES are very revealing and the difference can clearly be heard through the Martin Logan Ethos speakers. Best of all is that Paul's philosophy of building high performance cables at reasonable prices with a 30 day trial allows me to test out the products in my listening room. Prior to switching to ANTICABLES, I was using more costly cables that received very high ratings in The Absolute Sound magazine. |
agriculturist I am using ANTICABLES Level 3 power cords in my system which has several power conditioning components - Furutech GTX-D NCF(R), High Fidelity Cables MC-6 Hemisphere, and Furman IT-Reference 15i. Once I auditioned the L3 on my DAC, I ordered two more for the Martin Logan Ethos speakers. You may find this URL informative on the L3 power cords http://anticables.com/power-cords#!/Level-3-Reference-Series-Power-Cords/p/14644872/category=3461168. As well, I have talked with Paul Speltz on several occasions and he provided me with good answers to my audio questions. |
More Trackers to be sent tomorrow. We just ran out of time and gas today. They can't ship out as we missed UPS in any event. Exciting times for sure - the phone was ringing quite a bit today after CES - the Flat Panel Display/ Projection Guys are really interested. We had 11 unsolicited new orders from this group today. Back to packing... Thanks for the support everyone... Lynn and I sincerely appreciate it. Best wishes, Mark |
@lasuede - Thanks for your note - and I can assure you that units are identical - save for the 220/230 operation. We have near to 80 units overseas now - with Singapore and Thailand easily our best distribution. Many customers happily using these products overseas. Best wishes - here to help... Mark corepowertech@outlook.com ++1.720.317.9141 |
Greetings All... I just learned today that Core Power Tech E=C 300 has won Most Wanted Component from Stereotimes... You can find that data here... http://v2.stereotimes.com/post/mw2016b My sincere thanks to Greg Voth for sayin' it like it is :) My additional thanks for my Brother Clement Perry who just today ordered 2 x 1800's (I had to tell him he had to wait a bit :(... ) We are very grateful... Greg's comments as noted below... Many thanks Mark Core Power Technologies EQUI=CORE 300 (EQUI=CORE 300 $799.00 w/2.5 foot cord, $849.00 w/5.5 foot cord, $899.00 with 8.5 foot cord reviewed here):It might be trite to say I heard things I’d never heard before, but it’s true. With the EQUI=CORE 300, everything seems so much more 3-dimensional and effortless. The presentation sounds SO much bigger and more dynamic, with deeper and more enveloping bass within a much deeper soundstage Micro dynamics and subtle nuances that escaped me before are far more apparent, the noise floor has dropped noticeably lower and the 300 appears to offer a 12 to 20+dB boost in dynamic range. Upon hearing the EQUI=CORE 300 for the first time, I wrote Core Power Techs Mark Schifter the following: ‘Magnificent! It ain’t coming back.’ Since then I’ve acquired a second 300. (Greg Voth) |
Have spoken to many of you these last few days and I'm really appreciative of the comments and encouragement. Thank You! It looks like as of today we have finally cleared our backlog with the exception of some 220/240v units that will be ready shortly. Production tells me we actually have 1 x 1200 and 3 x 1800's that will be ready to ship on Monday that have not been spoken for. Happy about that... Here to help - answer questions etc. Best wishes, Mark |
Per the last call I just had - contact data as follows - www.corepowertechnologies.com corepowertech@outlook.com I also welcome your calls - ++1.720.317.9141 Thanks so much, Mark |
@droleg - thanks for your note here. I apologize for only getting to this now. We are fighting through a difficult day here with Snow and Ice - we are under Winter Storm Warnings today. One of the best explanations of Balanced Power comes from the originator which is EQUI~Tech... Mr. Glasband has done a superb job of explaining this through this article - http://www.equitech.com/articles/origin.html I hope this helps. We as well have our own measurements via our Topology which are really convincing. Best wishes, Mark |
Thanks for your note Oleg... Today was "snowmageddon" here... really bad. Colorado is a beautiful place - but when the Ice hits... it becomes no fun at all... I lived part time in Far East Siberia for 9.5 years so the cold is no big deal for me... but that ICE.... ay yay yay... :( Best wishes, Here to help... Mark |
I received my ANTICABLES Level 3 Reference Series Power Cord on Thursday (1/12) and put it on my Audiodhrama Cable Cooker for three days and then put it into my second system on my Allnic T-1500 (300B) Integrated amp, also had it plugged into my CPT-1800. I do find the Level 3 power cord to be a very good value and it performs very well. My Cerious Technologies Graphene power cables and my CPT-300 also perform very well. I would be very hard pressed to pick one of the above mentioned power cords over another. I can’t say that I can hear a difference of one power cord over the other, at least not at this particular time. One advantage of the CPT-300 is that it has the ability to clean crud from your AC current which might be an advantage depending on the quality of AC. |
| Post removed |
Good Morning... @bg1968 Many thanks for your comments - truly appreciated. It was also good to chat with you as well. We are really glad you are enjoying your unit. Lastly @larryh111 - while your opinions are certainly appreciated - most of the people on this thread (11 pages long) have had experience with our products and others. Respecting ones opinion is the norm here and quite expected. We are all here for each other - to learn and enjoy. Thanks so much, Mark |
@Mark I have a Torus AVR16 CE that feeds all my gear (tube monoblocks amps, pre, TT, tuner and DAC + Drive). I'm happy with that but as a little bit obsessive ,ha hum, I ask myself if a bit of balanced power between my gear and the Torus could bring some more benefit ? Did some of your clients or forumers have experienced that ? |
@barbapapa Thank you for your note. Firstly - the Torus Products are FIRST CLASS and really well built. I like their offerings quite a bit... That said - Balanced Power is the way to go. I say this because Good Power is the FOUNDATION for a Good System. Time and again we hear from customers that tell US what a difference Balanced Power has made. They can HEAR the difference - and that's where the rubber hits the road for all of us. I'm here to help you in any way possible... corepowertech@outlook.com or ++1.720.317.9141 Best wishes, Mark |
@icorem Thank you for your note. I currently show we have two 220v orders on backlog - they are Hong Kong and Israel. The Hong Kong units are done - we are waiting for Powder Coated Extruded Corners to arrive from our Powder Coater - we have been told they will be here Tuesday of next week. We apologize profusely for this delay as the extruded legs we have here were deemed B Level. We don't want to send B Level of course... If this is Israel - we just Friday received 220v 1800 Transformers. The chassis is built and ready to be loaded. Our apologies here of course. We had to wait for 220v Transformers from our vendor. In either case - we feel badly about our delay and we will send something extra to apologize. Thank you for your extended patience. We really do care - and we are very sorry for the delay. Thank You, Mark |
I'm so very saddened to report that we just lost a good friend and uber-gifted Engineer in John Petrucelli John was a very well know Engineer in the Pro Audio World and he has been our Engineer of Record on our Power Core project. John passed last night. He will be sincerely missed... We have a great team at Core Power Tech - that sad losing Tyler and then Scott and now JP... I hardly know what to say. Tonight it's music and perhaps even a glass of red wine. The Power Core will make it's way to the market before mid-year, but it will be in a lower-power variant (where I believe re-generators work best) and done a bit differently then first imagined. JP was our 2nd in Charge on the BOM Project I built for Emerald Physics - he did an amazing job along with Olga and Gary. They brought Doug Goldberg's work to life. Sad day - I will however celebrate my dear friend with music and fond memories. Best to all - Mark |
Update on my modified CPT 300. I stumbled on Furutech FP-S55N / FP-S032N and Nanotec #308 Nano AuAg bulk power cables thanks to @fork. I have 6 made with Furutech NCF connectors. NCF connector is $400 each but worth it in comparison on same cable. These cables are resolving, full bodied, linear and transparent. Whenever I had a CPT 300 in the system, quiet and transparent but had an urge to turn up the volume. Information is missing and volume level was NOT the problem.. I thought about replacing CPT 300 cables with Furutech FP-S032N ... Been working with Mike Garner at Tweek Geek, a great guy never tried to squeeze an extra penny from me. Turns out he has a CPT 300, had similar experience and replaced his with FP-S032N and connectors 90% SQ of NCF but much less expensive. I had both modified and VERY VERY satisfied with the results. If anyone is interested, contact Mike and demo his cable before modification. Feel free PM me for more info. |