Denafrips Pontus 15th, Pass Labs INT-60, and Wilson Sabrinas

I have the Sabrina and drove them with Pass XA30.8 and X260.8. 
Your Int-60 will be fine if the room isn’t too big. 
As to the speaker cables, I used Furutech DSS-4.1, Audience AU24SX and Audience FrontRow. I also tried Nordost Tyr 2.
Audience FromtRow is my favorite followed by AU24SX.

If you want to get things up and running with a cheap pair of speaker cables get something like kimber 4tc or 8tc with spades. Sabrinas don’t eat bananas. 

I would recommend getting the system together and breaking (re-breaking) it in. Then start thinking about cables. I use DHLabs as budget standard to break stuff in a decide where to go from their. If you find the top end a bit hot, then Cardas can calm them down. Transparent will pass through exactly what your components create. 

Most important. Re-break in. I recently got and amp that had been used. It needed several days of play to get back to where it had been for shipment. But besides, you need a couple of weeks minimum to really understand what your "new" system sounds like. Then you can start thinking about upgrading wire. 

Good advice from ghdprentice. Cables is a way to fine tune the sound. No need to mess with it until you find out what the equipment sounds like in your setting. Only then will you know what sort of fine tuning you need. 

Thanks all!! I’ll stick with my modded (banana to spade) cables and let the system burn in before I spend a TON on cables. This is my first real system, anyway 🤣 Thanks again!

The 7 gauge world best cables are excellent for the price. They will let you hear all your system can do, without any coloration. I have a set of cardas clear reflection and many times depending on which of my 12 pairs of speakers I use, I prefer the wbc. Try them and if they don’t work for you, they can be returned to Amazon. 

what do you think of it? cos we can't demo it so have to just speculate to the best of our ability. How does it sound to you? @craigvinet 

For cables, get two of this (get black for left speaker and white for right speaker at the lenght you desire) - https://www.amazon.com/GearIT-Premium-Braided-Speaker-Plated/dp/B071YW6TVN/

Doesn't alter the frequency response, is well built and doesn't cost stupidly too

@kofibaffour Those are the ones I got!! I’m taping and heat shrinking the spades in as we speak!!

@craigvinet you're all set then. Enjoy your media on your system and cables shouldn't be a worry again. You're done in that department

May be I misunderstood but I thought you have no speaker cables at all. 
I may also be off track but why would you use garbage cables to break this system in? What baseline are you setting with Wilsons and Pass using garbage wiring? Unless that’s all your budget allows. It’s equivalent of driving the first 1000 miles in a new BMW on Prius wheels just to break it in. Just get good quality cables on a used market. Resell to upgrade and lose nothing.
But…what do I know. 

@kofibaffour heck yeah!! Great news - thanks for your help! ❤️

@audphile1 - I hear what you’re saying, and I do have access to better cables to try. If I can hear the difference then I will certainly upgrade them! But for two orders of magnitude cheaper, I can’t not try.

@craigvinet go for it. You’re going to be amazed when you eventually upgrade to better cables. Pass/Wilson combo never failed to show me what’s it connected to

@audphile1 excellent!! I look forward to learning more. This setup already is WAY beyond anything I’ve ever had. Thanks for sharing your experience!!

Duelund makes some great cables at $16/ meter from parts connection. 
I replaced my Cardas with them

Kudos to audphile1.  Pass labs/wilson will absolutely reveal what IC and cabling you use. The downside is you will be spending money, the upside is how much fun it is to hear the improvements. 
Everyone recommends what they use, so one more won’t hurt right?  On my Pass labs/wilson system I like Morrow products (wait for a sale) as they are very neutral, never too bright for Wilson’s earlier tweeters. They also aren’t uber pricey when on sale. 

They all matter to a point, but changing interconnects made the biggest difference in my system.

Fortunately my local shop (Definitive) will let me try out cables so I get the best of ALL worlds!! I went with the cheapest option first so it’s all up from there 🤣 I hope the Transparent Audio ICs I bought foot the bill