Absolute top tier DAC for standard res Redbook CD


Hi All.

Putting together a reference level system.
My Source is predominantly standard 16/44 played from a MacMini using iTunes and Amarra. Some of my music is purchased from iTunes and the rest is ripped from standard CD's.
For my tastes in music, my high def catalogues are still limited; so Redbook 16/44 will be my primary source for quite some time.

I'm not spending DCS or MSB money. But $15-20k retail is not out of the question.

Upsampling vs non-upsampling?
USB input vs SPDIF?

All opinions welcome.

And I know I need to hear them, but getting these ultra $$$ DAC's into your house for an audition ain't easy.

Looking for musical, emotional, engaging, accurate , with great dimension. Not looking for analytical and sterile.
mattnshilp
Can't wait for Matt to get back from his vacation and get back to auditioning, lol.  Once I'm out of the hospital and get a couple more weeks or rest, I'll be heading down to his place (if my ride comes through, lol).  I can't wait to hear his system and what he thinks of the Shun Mook Footers he finally got in before he left.  
Hey you @ctsooner ,  get out of that hospital.  Get some rest and get well.  Deb is taking the same Rx infusion.  Time will tell.   Best to you always my Vandersteen aficionado!  David
  
That fine for you, but sorry it's what I've heard with many A/B's in my own system and with others. To me PCM done with DS is akin to amplification being done with Class-D

I'm with fuzzbutt17 (Benjamin from Mojo Audio) and yet to hear different, to me the best pcm conversion is not done with DS.
   
You have to ask yourself why are there so are many (expensive) discrete and "chip versions (egSchiit)" R2R lader dac's now being made that are made in Europe, GB, China, US ect,  just to do PCM with, and not even able to do DSD, crazy marketing if it had nothing to better to give.
 
Why go to that bother and expense with a "so called" dying Redbook format. When these guys can get say the top line ESS Sabre dac chip for a fraction of the price, with digital domain volume control and all sorts of other goodies, and be able to do DSD.

Cheers George
@audioengr

+1 Yes it is the filtering that creates the dead effect. Still one of the most problematic issues with any DAC. Marantz house sound is dark and dead. I have heard plenty of great sounding SACD but Marantz is not to my taste.

@georgehifi

DS or R-2R can both sound fantastic if done well. DS currently has the edge in performance especially the hybrid designs that have 6 bits in depth. Old DS with only one bit depth suffered from high amounts of noise but was besutifully linear. R-2R has much less noise but suffers from linearity issues. The hybrid designs that are in the all the modern ESS chips are a great blend of the positives from both - they are highly linear and low noise too.

Modern DS chips are basically akin to a 6 bit R-2R - they function just like R-2R with their output level a function of the number of selected individual DS that are summed up to make up the output - exactly like a ladder DAC.

Noise is what drives the need for heavy filtering....


Thanks Shadorne, but George will now come back and tell you that you are incorrect. Honestly he lost me again when he said something about Schitt beimg an expensive discrete.....::::  they aren’t in this conversation if too DAC for anything. Nice in their price range but many of us like others in the just over 2k. That’s another topic though.  

He forgets about implementation being much more important since the new ESS chips are so good. Both can sound great. 

None of of us have ever said the old tech can’t sound good when it’s done right. Great designers stay open minded.  Look at Steve and others who can and will use any tech if they feel it can be done right. Others who aren’t open minded can’t be taken seriously. That’s the reality. 
especially the hybrid designs that have 6 bits in depth.



That's right, the last great full 24bit R2R chip was the PCM1704 and is unobtainable now because of massive manufacturing costs, having to laser trim those resistors. 

The competition to them is now coming from these newer hybrid dacs with 6 or so bits, a lot of the top end guys are using them, maybe one day they'll be able to make full 24bit again like the PCM1704 as cheap as the the DS from ESS and others, and we'll get back to proper conversion of PCM again, instead of a facsimile of it with DS.

Cheers George      
Look at Steve and others who can and will use any tech if they feel it can be done right.

He can't go 24bit multibit converters as there are none made for him to buy, so he has to go DS or get the newer hybrids as shadorne bought up.

He uses Analog Devices Delta Sigma chips and one of his quote was
"we can select the digital filter with this chip, we can essentially make this Delta-Sigma sound a lot like a NOS R2R DAC"
"Because we can select the digital filter with this chip, we can essentially make this Delta-Sigma sound a lot like a NOS R2R DAC, but also supporting hi-res files"



Cheers George



Thanks for the info George. I'll still let my ears make the choice for me like most do.  Both can sound great and that's all that matters.  There is no one is better than the other right now.  Good DAC's on both sides of the isle as has been pointed out by Matt and many others of us who have or still do own both types.  
Honestly he lost me again when he said something about Schitt beimg an expensive discrete.....::::

BTW ct, Have to correct you here as well, I didn’t say that read again.
  
Expensive was in reference to "discrete" R2R dacs
  
And "chip" versions which if you know are cheaper, which Schiit Yaggy uses, and the best bang for buck you can get, for converting PCM Redbook.

Cheers George

maybe one day they'll be able to make full 24bit again like the PCM1704 as cheap as the the DS from ESS and others, and we'll get back to proper conversion of PCM again, instead of a facsimile of it....

This is exactly the chip I used in my Spoiler TubeDAC.  Sounded really lifelike, but the Overdrive SE and SX using D-S left it in the dust for weight, detail and dynamics.

Steve N.
Empirical Audio

Hello Steve N, 
George frequently to support his point says R2R is "bit perfect" whereas delta sigma is merely a "facsimile". As a listener I don’t hear R2R superiority. As a builder/designer is this claim true and if so is it an audible or meaningful distinction in your experience?
Charles
charles1dad - Hello Steve N, George frequently to support his point says R2R is "bit perfect" whereas delta sigma is merely a "facsimile". As a listener I don’t hear R2R superiority. As a builder/designer is this claim true and if so is it an audible or meaningful distinction in your experience?
@charles1dad
With do respect, I would just like to point out that not only does George make the claim as stated in your quote, but so too do many DAC manufacturers.
@fuzzbutt17

Victims of marketing.

A few years ago at RMAF we held a contest (with some pretty cool prizes) to determine if people could guess the resolution of of five songs.

We had a 25 song playlist printed on a single page with columns for song names and check boxes to the right for "16/44.1" and "24/96" and "24/192." We literally passed out a dozen clip boards and had a pile of sharpened pencils at the info table when you enter.

Each Attendee had to stay for five songs and mark a check next to what resolution they thought each song was. We had a few hundred Attendees enter the contest.

How many songs out of five do you think the average person got right?

NONE.

We had about a dozen prizes and had trouble finding enough people that got ONE out of five guesses correct. We had to give one of the prizes to a person that crossed out and wrote over but their crossed out guess was right (seriously).

Not one person could even get two right.

BTW, more than half of the songs we used were nothing more than well recorded 16-bit 44.1KHz Reed Book CD rips.

What does that tell you?

This is a faulty test, IMO, as most people do not have experience with 24 bit music that is dithered down and converted to Redbook CD. If you do not know what to listen for, this is a difficult test. There would likely be many more correct answers if you played each song at 16/44.1, and then a 24 bit version, in random order. If you disagree, please feel free to hold this contest at your next show.

I agree that current technology does a great job with Redbook CDs. However, there is no replacement for 24bit masters, IMHO.
@fuzzbutt17 

Benjamin,

I just skimmed through your article, "The 24-Bit Delusion" and I see we will not agree. You article is full of untrue claims, IMO. 24 bits are not just about dynamic range. Higher bitrates properly used in recording are for greater headroom, to avoid digital clipping, or unneeded processing. Higher bitrates also provide for greater S/N levels, lower digital distortion, reduction of noise from processing, and eliminating unneeded processing. 

"In contrast, some of my favorite digital recordings were digitally mastered from 1950s analog recordings. Many of these recordings were done as a group of musicians playing in a room with one take per track and a minimum of post-production editing. Though these recordings have a much higher background noise being limited by old-school pre-Dolby 60dB dynamic range master tapes, they retain an organic character that can't be duplicated any other way. When you hear the organic character and coherent in-the-room harmonics, it is clear why so many audiophiles prize these recordings."

You conclusion is incorrect. Your preference has nothing to do with dynamic range, but with the use of tube mics & gear, RtR analog recordings, as well as the recording style. Digital masters can retain many elements of analog recordings, and higher bitrates are much more capable.

Remove the filtering from your DAC, and see how you like 16 vs 24 bits.
@sadono

You write with wisdom like a child, directly to the heart. I trust you will interpret my questions as genuine.

Simple yes/no questions if I may... no need to elaborate beyond yes/no but by all means do so if so inclined...

- does this 16 vs 24 bit "difference" effect your enjoyment of listening to music?

- are you able to discern a difference between 16/24 in a blind test (assuming you’ve tried)?

Thanks.
Gdhal,
I cited George as he has repeated this often on this particular thread/site. I realize that there are manufacturers who share this view but certainly not all do. Given that Empirical Audio has produced both I was interested in their opinion regarding the multi bit/R2R "bit perfect" claim. More importantly how relevant is it ultimately to actual sound quality.
Charles
I realize that there are manufacturers who share this view but certainly not all do.

Maybe it’s because the ones that don’t Charles, can’t make "discrete R2R dac’s" as the complexity is many many times higher, and they also can’t get R2R dac chips ready made any more.
So they don’t have an option but to go to DS or DS hybrid, as these chips are available (and cheap) .
BTW: You don’t see anyone going to the trouble of doing a discrete DS or DS/hybrid do you? Why is that?

Cheers George  


@gdhal 

@sadono

You write with wisdom like a child, directly to the heart. I trust you will interpret my questions as genuine.

Simple yes/no questions if I may... no need to elaborate beyond yes/no but by all means do so if so inclined...

- does this 16 vs 24 bit "difference" effect your enjoyment of listening to music?

- are you able to discern a difference between 16/24 in a blind test (assuming you’ve tried)?

Thanks.

Yes and yes.

When properly processed, 24 bit masters have greater tone, harmonics, and lower distortion than Redbook CD. Far more analog like.
George,
Precisely why I addressed my inquiry to Steve N who by all accounts has been successful manufacturing R2R and DS DACs and is a credentialed source. There are unquestionably other builders capable of using either circuit type in DACs. Since he is a knowledgeable contributor to this thread I was interested in his opinion of multibit/R2R "bit perfect " practical or real  world  audible attributes. .
Charles
Steve N who by all accounts has been successful manufacturing R2R and DS DACs and is a credentialed source
Yes Charles but as I said not discrete R2R. he has to use either DS or the Hybrid.
Or he could purchase "discrete" R2R made boards from Sokeris Audio Engineering but he’ll loose his dsd capability, which means nothing to me, as it was pcm before it became that.


Here as of 2017 (more now) are the companies now doing expensive to produce "discrete" R2R ladder dacs for PCM (Redbook) replay. Schiit uses a R2R chip (not for audio) but for missile guidance as there are none now available for audio use, because DS was so much cheaper to make.

Up to $3k: Border Patrol, Monarchy, Denafrips, Audio-gd, MHDT, Holo, Soeskris, Metrum, Schiit

$5-$15K: Audio Note, MSB, Metrum, Computer Audio Design, Aqua, LessLoss, Totaldac, Lampizator

$15K+: CH Precision, Aries Cerat, Light Harmonic, Audio Note, MSB, Totaldac, Lampizator

**Special mention to MSB, Monarchy and Audio Note, who never gave up R2R. Even after the takeover of delta-sigma.



Cheers George
To be very clear I’m not disputing the notion of multibit being bit perfect but rather how is it manifested as a demonstrably superior quality above and beyond DS capabilities. I don’t hear this purported advantageous asset with comparisons as stated earlier. If I'm not mistaken , bit perfect applies to discrete R2R and multibit R2R chips.
 I don’t hear this purported advantageous asset with comparisons as stated earlier.


That fine if you can't, but I do with CD's 16/44 or the magic sounding Reference Recordings 24/96 CD's that have HDCD encoded which my Linn CD12 thankfully can do with the PMD200 chip.

The best which I've yet to hear from what I've been told is DXD.
I've heard the defunct DVD-A which was very good, better than the Reference Recordings above it's a pity it didn't take off. 

This is a good read from MSB Technologies, they use R2R Ladder in their top line dacs. (big bucks)

 http://www.msbtechnology.com/faq/why-ladder-dacs/

Cheers George
Perhaps it is the harmonic distortion from an R-2R DAC that listeners like - kind of like tubes - measures poorly but sounds subjectively better...

With two types of resistor perhaps the distortion is more in the even harmonics.

All I can say is that for sure the harmonic distortion is way higher on R-2R than DS DACs due to the non-linearities introduced by the finite accuracy of the ladder resistors.

If true, then even low cost R-2R might sound great because higher cost R-2R will likely have less harmonic distortion...
Yes I’m familiar with MSB and have heard a few of their DACs. No doubt that they are fully committed to discrete resistor ladder R2R . I understand the supposed merits of this approach. I used to own a Metrum Octave DAC a few years ago and brought it primarily due to its R2R approach and universal rave reviews. It was in fact a good sounding DAC but preferred the Yamamoto DAC (DS) in my system. I heard the Holo Audio Spring level 3 DAC (discrete ladder design) in my system. Very good but again I found the Yamamoto YDA better sounding. The Metrum and Holo Audio are representative of "bit perfect" given their architecture. TotalDac (bit perfect) outperformed by the delta sigma Bricasti SE in a friend’s system I listened to extensively. .

George it could be as simple as we heard differently. I’ve listened to a number of R2R DACs and they ranged from good to exceptionally good but did not exceed the sound quality of comparable delta sigma DACs. We both have our respective listening experiences and subsequent outcomes. At the end of the day we judge and formulate opinions based on what we have heard.
Charles
Here is a thesis paper explaining why R-2R DACs have lots of harmonic distortion.

Looks like the distortion is consistent across all harmonics.

https//pdfs.semanticscholar.org/9a52/fcba6dd87371974b3c146dbb5a3a00ffee74.pdf

These students were sponsored by NAIM to investigate ways to reduce this non-linearity harmonic distortion that is inherent to R-2R designs.

The 2nd harmonic will give this kind of DAC a richer sound. The higher odd harmonics will tend give an R-2R a slightly harsh edgy sound in the treble. My guess is that R-2R DAC manufacturers will use filtering to roll off the highs in order to reduce the odd harmonic harshness in the upper treble. Subjectively this might be preferable to a higher performance DS DAC.


shadorne - Here is a thesis paper explaining why R-2R DACs have lots of harmonic distortion. Looks like the distortion is consistent across all harmonics.....

Hi shadorne. I have no disagreement in what you are stating in your previous post. I would just like to submit as food-for-thought that Jimi Hendrix used fuzz distortion. Not quite the same as the distortion you are speaking of, nevertheless, worth mentioning, IMO.

EDIT:

....that would be *intentionally* used....
George frequently to support his point says R2R is "bit perfect" whereas delta sigma is merely a "facsimile". As a listener I don’t hear R2R superiority. As a builder/designer is this claim true and if so is it an audible or meaningful distinction in your experience?

I have compared D/S to R2R with my own DAC designs. The D/S is better, however my R2R was using older chip-based technology. Some of the new clever design tricks with R2R overcome some of the limitations of older chip-based technology. The accuracy of each level is still an issue however, so this causes its own distortion.

When you compare these two technologies, you are comparing two different deficiencies. The question is: given both designs are excellent, which one sounds more live to you?

I have personally had great results with D/S, but if I designed an R2R from scratch, it might be equally good.


Steve N.

Empirical Audio

audioengr - ....The question is: given both designs are excellent, which one sounds more live to you?....

Hi Steve. Not meaning or wanting to play on words here, but for clarification purposes, by "live" do you mean "authentic"? Thanks.

@gdhal

Even harmonic distortion is pleasing. It is higher order odd harmonics above 7th which are not pleasing and harsh sounding.

It looks like the R-2R DAC has equal amounts of even and odd harmonic distortion. The 2nd harmonic being the most important. Above 7th odd harmonics is where it becomes disagreeable to the ear. If the audio is filtered at higher frequencies (most older NOS designs have gentle roll off from analog output filters) then the lower harmonics will dominate and it could sound subjectively excellent.

This might be the key reason R-2R sound could be preferred for the same reason tubes are highly regarded for their wonderful sound...

A complete lack of harmonic distortion is about as dry and clean sounding as it gets - the latest ESS DS chip has extremely low 2nd and 3rd harmonic distortion (-130dB in the mid range) which is exactly where you get most of the harmonious pleasing warmth in tubes. 

Not meaning or wanting to play on words here, but for clarification purposes, by "live" do you mean "authentic"?

By live, I mean when I play a live track, say a jazz performance in a restaurant, can I close my eyes and believe that I’m actually sitting in the restaurant?

Can I turn my back on the speakers and believe that there is a live performance behind me?

Does a good piano track sound like my Yamaha Grand Piano in the other room?

Steve N.

TotalDac (bit perfect) outperformed by the delta sigma Bricasti SE in a friend’s system I listened to extensively. .
Funny you mentioned these two, we had exactly this shoot out for a whole day on a reviewers system at his place in the beautiful Blue Mtns on his Wilson Alexia MkII, Gryphon Antillion Evo Signature my passive pre. We also went direct, with the same results.
The Total dac was far better than the Bricasti in every area, even the owner of the Bricasti SE conceded, and is going to sell it to go to R2R.

Don’t get me wrong the Bricasti was lovely and sweet and smooth, but not exciting when compared, it had no jump factor like the Total, that snapped your head back in disbelief with some of the dynamics, and yet it still stayed sweet and smooth when needed.
You could hear deeper into the music because of this expanse from quiet to loud. And it gave all this to you not from the speaker but all around it with an image and depth that washed over you instead of directed from the each of the drivers of the speakers, as if the speakers weren't there in the room.

Cheers George
shadorne - Even harmonic distortion is pleasing. It is higher order odd harmonics above 7th which are not pleasing and harsh sounding....
Hi shadorne. Thank you. Not all that long ago, Ralph (atmasphere) provided a wealth of information regarding harmonic distortion in this thread https://forum.audiogon.com/discussions/full-detailed-sound-at-30-40-50-db (probably other threads to :) )

Your response is very much in line with what I’ve previously understood in this regard. In fact I understand there is "weighting" of distortion also at play. Noting that manufacturers typically provide "total harmonic distortion" and in some cases "intermodulation distortion", I had asked in that thread if manufacturer specifications could provide insight as to where the harmonic distortion is occurring. His response led me to believe "this can be tricky". Point is one may not readily be able to determine where the distortion is occurring, and may only be able to rely on subjective listening.

Your explanation certainly does make sense. Would you say then that the *implementation* is the dominant factor of listener preference between DS or R2R, or is the *distortion* now the dominant factor (again, in your opinion)?

Thanks.

The Totaldac was far better than the Bricasti in every area, even the owner of the Bricasti SE conceded, and is going to sell it to go to R2R.

This shows that in this system, one DAC beat the other.  Did they even use the same interface?  Was it USB or S/PDIF?  All of this matters.  Even 2 different USB interfaces will perform differently.   It does not prove that Delta-Sigma is inferior to R2R.

The devil is in the details, the implementation and design details, not the D/A technology IME.

Steve N.

Empirical Audio

audioengr - ....By live, I mean when I play a live track, say a jazz performance in a restaurant, can I close my eyes and believe that I’m actually sitting in the restaurant? Can I turn my back on the speakers and believe that there is a live performance behind me? Does a good piano track sound like my Yamaha Grand Piano in the other room?
Hi Steve. I get what you're meaning now by live. To my understanding the audiophile term for what you've described is "suspended disbelief". True? I'd have to think the DAC design (DS or R2R) may not be the dominate factor in achieving what you describe. Big factor though, certainly. I would think the room, the speakers and the recording itself would be more prevalent. So when you state that the DS was better - at least with your designs - I would have to think your designs evolved over many years, and in that case the other variables I mentioned (room, speakers and so forth) may not have remained constant. In any case, I appreciate your clarification. Thanks.
Did they even use the same interface?

??? Of course we did.

Cheers George
George,
The system I heard these 2 DACs directly compared consisted of the
Absolare Passion Signature preamplifier
Krell FPB 600 mono blocks
Rockport Altair speakers
Velodyne subwoofers x 2.

Obviously we both heard the two DACs in very fine audio systems
What’s interesting is that the sonic attributes you heard that favored the TotalDac over the Bricasti M1 SE is the opposite of our findings. The Bricasti was noticeably more dynamic,energetic and alive sounding.

In direct comparison the TotalDac was smooth but polite and subdued (relatively speaking). The Bricasti had the better musical flow and pace which was very engaging. I have to say it was also at the same time more organic/natural. Overall clearly the better sounding DAC. Both were use via ethernet and attention was paid to matching levels.

In absolute terms the TotalDac was quite good but the Bricasti was the superior sounding DAC head to head.
Charles
We had 5 techs, 3 non techs at our meeting and were all insistent on perfect level matching.
All levels were matched overhaul not by spl by ear or meter but by the voltage down to the mV fed into the speakers at differing sine waves with a tech cd to get the levels absolutely identical to the mV 
And the Total Dac 7 with larger optional off board power supply, was by far the better, with PCM Redbook replay.

Cheers George  
Yep,
Different groups of listeners, ears,systems etc. Contrasting opinions are nothing new within  the niche of High End audio. I don’t question either group of listener’s conclusions. All of us just report honestly what we hear. Both DACs have happy and loyal owners. Certainly experienced audiophiles and music lovers comprised both groups.
Charles
Wow guys, gone for a week and right back to PCM vs R2R again. George must be here, lol. 

This is NOT a thread on R2R vs PCM technolog. Nor is it a thread on why R2R is the ONLY design that should be used, George. I don’t believe in absolutes. As I have said, I’ve heard a LOT of dacs that sound great. 

I have some great stuff coming. Stay tuned. 

Im home this evening. 👍🏻
This is NOT a thread on R2R vs PCM technolog.


" Absolute top tier DAC for standard res Redbook CD" 
Sorry but you being the OP headed this.  

That's why it went down that path again after you gave such a good report of the R2R Multibit   "Mojo Mystique V3"  with comments like this.

SO, if you are looking for a single ended DAC you’d be a fool to not listen to the sub $6K single ended Mystique V3!

Of course, DSD lovers need not apply.

Then it's about "best for PCM RedBook" as you stated. And of course the talk will come down to technology.

I hope you do some more Matt from the list below, as it will broaden your horizons on what constitutes an great pcm RedBook dac.
  
As I posted there are many discrete R2R ones now being made (below) as R2R chip converters are unobtainable except for the military missile guidance one that Shiit uses, hopefully they do come back as manufacturing techniques improve to laser trim all those microscopic resistors to a minuscule % .0000001% or less without the massive costs of doing it.
There is a large market for them to come back to, if Delta Sigma can't in the future get the sound from PCM that these R2R's can, but I do admit the 6bit hybrid DS's are getting closer, maybe they just need to go the full wack to 24bit with no DS who knows. Just keep DS for DSD/SACD conversion. 

Up to $3k: Border Patrol, Monarchy, Denafrips, Audio-gd, MHDT, Holo, Soeskris, Metrum, Schiit

$5-$15K: Audio Note, MSB, Metrum, Computer Audio Design, Aqua, LessLoss, Totaldac, Lampizator

$15K+: CH Precision, Aries Cerat, Light Harmonic, Audio Note, MSB, Totaldac, Lampizator

**Special mention to MSB, Monarchy and Audio Note, who never gave up R2R. Even after the takeover of delta-sigma.

Cheers George



I am also in the side that thinks that all common architectures (R2R, DS, FPGA) can work when implemented with care.

Speaking of FPGA, have you read or listened to PS Audio and how they implemented the DirectStream Dac?

I think the technical descriptions are interesting and much more detailed than most other companies. I haven't heard the dac  but of anyone has any compared it to other dacs mentioned in this thread I would like to hear what you think.
Then it's about "best for PCM RedBook" as you stated. And of course the talk will come down to technology.

George, respectfully, knock it off. Everyone reading this thread is familiar with your R2R dogma.

I have personally had great results with D/S, but if I designed an R2R from scratch, it might be equally good.


Steve, your ethernet DAC only accepts PCM. How do you recommend converting DSD?

George, respectfully, knock it off.

Ah, respectfully that’ll be a big no! If you don’t like what you read, either don’t read it, or you can try to use the report button.

Cheers George
Matt said...”This is NOT a thread on R2R vs PCM technolog. Nor is it a thread on why R2R is the ONLY design that should be used, George.”

George. This is the OP’s thread..not yours. Show some respect and move on from your tiresome lambasting of everything that does not fall within your narrow minded nomenclature of all things R2R. Start your own thread and have at it there...
Post removed 
"I have faith in the average audiophile" Elizabeth,  I share that faith. 
I assume that the thread participants are adults capable of independently forming their own judgements.  The  repetitive dogmatic   approach can alienate and thus be unintentionally counterproductive.  
Charles 
Sorry for the delay. I just came home from a week long trip to London and Paris. Great family time. Loved it all. Looking forward to getting some solid listening time in this week though. Yes, I missed my stereo.... I went to one store in London but it turned out to be a tech store more then Audio. Apparently, Diavalet have crossed over to mainstream mass market audio....

I won’t have much to report for a day or three, so let’s run off topic for a bit and hear about trips you guys have recently taken to audio related locations. Shows, intentional trips to audition gear, concerts, anything that involves music, gear and traveling.

Should be a fun diversion.