Singular Amplification Experience; Review Now Published


Well, at at least the first of 3 segments is published at Dagogo.com 

The Pass Labs XA200.8 Mono Block Amplifier; super-amps exist, and it's shocking, when they throw their weight around, how much they sway a system. 





douglas_schroeder
The XA200.8 is sensational with the Kingsound King III electrostatic speakers! Vocal groups sound superlative! 

The Exogal Comet DAC with its internal volume control matches up quite well with he XA200.8, as I am going direct from the Comet into the XA200.8 monos with a Schroeder Method double IC (Clarity Cable Organic XLR), and Clarity Cable Organic Speaker cables (biwire). This is a very rich sounding combination. 
tweak1, you may be right... 
You know the answer; only direct comparison would tell. 

 If I built 10 rigs with five speakers, and the competing amp performed at an equivalently amazing level as the XA200.8, and at half or less than the price of the monos, well, that would be news, wouldn't it? 

But, my experience has been that is more a dream than reality. I do intend to get my hands on a GaN amp sometime. Will it upset the status quo? I have no idea, and neither does anyone else - unless they build 10-12 rigs. Just because it may perform better in one system doesn't mean it's a holistically superior amp. Most do not have that capacity to build a dozen rigs, and frankly, most reviewers don't want to be bothered (Imo, they also have poor methodology, wasting time on burn in when they could be discovering, as I do), and so and the anecdotal evidence will continue to swirl (and, perhaps, in a good way).

Frankly, even 10-12 rigs is still incomplete assessment. It would likely take a dozen more different types of systems to conclude it definitively.  The preponderance of evidence is from very limited rigs with not much exposure to a wide variety of setups and speakers. Assessing Agon community's assessment of a product is like stepping into quicksand, no
 bottom to gain support.  

As an example of how complex it all is, I am working with a new tube DAC that does fairly upset the apple cart - that's my assessment thus far, having built about 4 of the dozen or so configurations I plan. Initially, my thought is that any system with this DAC would have a very unfair advantage in terms of performance. If a quality amp was being used with another popular DAC, versus a system with the new tube DAC, it is very possible that the lesser amp would shine more brightly simply due to the astounding capabilities of the DAC. So, reports of the brilliance of a particular amp or DAC, etc. when emanating from someone who built one rig have some weight, but the variables are so many that it is difficult to draw a reliable conclusion. When I build 10-12 rigs, I gain deep insight as to what's going on and how that component will tend to play out in popular use. That's the only way I see of gaining a more reliable assessment. 

I am talking strictly in terms of performance, not budget. When fiscal considerations come into play, then the yardstick for assessment is a rubber band. Where the rubber hits the road, so to speak.  :)
d2girls

you need not spend mega bucks anymore to get great sound amplification.

Over the decades, I have owned a lot of different manufacturers class D amps, some were dogs, a few were really good (PS Audio M700s, Audio Alchemy DPA-1), but the class D module that does it for me is the IceEdge 1200AS, at least when highly tweaked as Ric Schultz has done. It’s a shame he is no longer making them, but PS Audio recently introduced their version, the M1200s with tube buffer ($6k: Gulp!), but right around the corner are reasonably priced GaN amps. And while it remains to be heard how they will compare to the high priced class A and AB offerings (or to one another for that matter) they will likely be ~ $4K, which is still a lot of $$$$$


I have seen a number of the PSA M700s on the used market in the $2K range, which is a veritable bargain by comparison to any amp regardless of type in the $4K+ price range


hth
Wish I was at retirement age to afford these mega priced amps
On the other hand I thank god I still have my youth
@douglas_schroeder 

Thank you once again for all your articles, especially these on the Pass XA200.8 amps.
Part 3 now published. 
The community will see that the XA200.8 was premier with a wide variety of speakers, something that has never occurred previously in 14 years. ESL, Line source, hybrid dynamic, Open Baffle, Horn hybrid - all were brought to new reference level. 
Part 2 now published. In this segment it will be revealed how dominant an amplifier's presence is in a system. When an amp is so extreme, new options for system building become available - and the results can be superior to traditional setups. 
joinid, you're welcome! 
I love the endless variety of system building, and that keeps me motivated. My goal/reward is the variety of experiences. 

Just yesterday I put the Legacy Whisper DSW Clarity Edition speakers back into the rig with the XA200.8, one of my favorite combos. Together, the experience of hearing it is like "elegance overload," which I force myself to suffer being exposed to for longer sessions.  ;)  
One of the most surprising and humbling experiences is ongoing discovery of how vast the performance spectrum is, a sensationally great range of sound quality and playback experiences. If I had not handled so much gear and built so many systems I would have no idea of the extent of it. It has taught me not to say there is no more room for improvement. 


recevs, I almost never pay attention to other reviewers' work primarily because I am so busy working on my own articles. Perhaps three times in 14 years have I read what someone else said in regard to a product I review. I could not have told you that Jason reviewed it. It was an interesting read, primarily as his methods and demo music are fundamentally different from mine, as will be seen clearly in parts 2 and 3 of my review.

In terms of the character of the amp, there is a notable difference in how we describe the bass; as the other amps compared in our reviews are distinct, a variance in experience should be expected. One can see in my review how the XA200.8 fares in comparison to other amps of similar power. Much of what Jason said in regards to the imaging, sound staging, headroom, etc. is quite similar to my impressions. Other than the bass, we reached a strikingly similar conclusion, and if we were both listening to the same systems, it is likely we would be in agreement on that aspect as well. 

Pass Labs must be quite pleased to have two distinctly different reviewers being harmonious in verdict. 

I am drawing up a plan to do comparison of the following in combination:

Two identical systems, one with selected elements featuring burn in, warm up, support, isolation devices, and cable "settling" vs. the other with selected elements featuring none of them. It will be similar in methodology to my previous work in the article "Audiophile Law: Thou Shalt Not Overemphasize Burn In". 


select_hifi
I also use DH Super Cones and Squares under all my components and can say they have built on the strengths of the Podiums. The music is completely free from the Speakers, holographic very musical with effortless dynamics.

>>>>Another example of physics at work, extremely hard materials like DH (Diamond Hardness) ceramic cones ALWAYS SOUND better than softer materials like brass, aluminum and carbon fiber. Back when I was a dealer for DH Cones I had a great number of them and other sizes too, and the DH Squares, maybe 50, in my room. There are many uses for them, some of which are perhaps beyond scope of this discussion. 😬

douglas_schroeder OP
twoleftears, not to worry, I think things will even out over time. If people learn to put their hard earned money into the actual electronics that make the sound, that’s a good thing. It’s a whole lot better than me gushing over some ridiculously expensive amp stands for inconsequential electronics, don’t you think?

>>>>>First, no one said you have to gush over ridiculously expensive amp stands. We’re actually not even talking about amp stands, much less ridiculously expensive ones. If you’re happy with the “pure sound” of your ridiculously expensive amps without benefit of isolation more power to you. It’s actually not (rpt not) true that amps make the sound, the SYSTEM makes the sound. It’s the concept of isolation. A system engineer’s system will ALWAYS sound better than an electronics engineer’s system. 🤗 That’s why I am saying you’re an anti isolationist. 
Post removed 
High end audio is like art......no one sees it the same. Quarter mile drag racing is a science. There are only 6 factors that get you down the quarter mile the fastest and quickest:.....weight, drag, traction, horsepower and gearing.....and then there is the driver. That is it. In subjective audio hot rodding there is an infinite number of things that change the sound. This is why no audiophile does their system like anyone else. It is an individual sport. "What I like to hear and what I think makes a difference to what I want to hear and experience....is what I want/believe and do." Some people who experiment a lot and are perfectionists know that everything you do makes a difference.....including amp stands. But who says you have to play there? No one.....we are all doing our own dance. Look at the dragsters......they are almost identical....because everyone knows its just those 5 factors and the driver. There is an infinite number of changes you can do to an audio system that are not measurable....not at all.....but you can hear them. This is one reason why most audiophiles limit their intake of info and things to try. You either have to be seriously rich or want to fool around all the time and try everything (which is impossible, anyway).

Please read Jason Serinus’s review in Stereophile for another opinion:
https://www.stereophile.com/content/pass-laboratories-xa2008-monoblock-power-amplifier

The dance is infinite....just like life. Enjoy the dance.
twoleftears, not to worry, I think things will even out over time. If people learn to put their hard earned money into the actual electronics that make the sound, that's a good thing. It's a whole lot better than me gushing over some ridiculously expensive amp stands for inconsequential electronics, don't you think? 

david_ten, my room is in the basement, which is ideal for sound isolation from the rest of the house. The flooring, then, is concrete slab with thick pad (At first the carpet company did not wish to put as thick a pad down, but there has never been water in the basement in the 54 years of the home's existence, and I insisted), and thick Berber carpeting wall to wall. 
The sensation I have when listening is that the room does not seem to distract from what the system is doing, a particular preference that I feel was achieved well. 



Here's Audiogon in a nutshell.  Nine responses into this thread, and nine comments on the amp stand. Score so far:

amplifier electronics, sound, synergy, etc. etc. 0

ampstand 9

douglas_schroeder OP
For the benefit of the community, I am not an "anti-isolationist". In my discourse I do not speak to the topic of isolation of analogue front ends, as I do not use analogue source. I presume it would be a very important part of the analogue setup, and were I using vinyl I would aggressively pursue the comparison of various devices and methods to determine their efficacy, as I have with other methods for speakers, components, etc.

I have done many comparisons of various isolation devices for components, and choose to focus instead on the electronics. My time is better served by building systems than waiting for burn in and placing isolation devices.

>>>>I hate to judge before all the facts are in but it appears I called that one right after all. 🤗 Yes, I know what you’re thinking, “but SS amps don’t have any moving parts.”
Roxy54, I"ll give you lenience on your comment! ;) 

FYI, my last response was not so much a reply to you, but to the assertion that I am an "anti-isolationist". Do not consider me to have shown disdain toward your comment. 

I would agree that pursuit of a stand for tube amps would be more desirable than SS amp. 


For the benefit of the community, I am not an "anti-isolationist". In my discourse I do not speak to the topic of isolation of analogue front ends, as I do not use analogue source. I presume it would be a very important part of the analogue setup, and were I using vinyl I would aggressively pursue the comparison of various devices and methods to determine their efficacy, as I have with other methods for speakers, components, etc. 

I have done many comparisons of various isolation devices for components, and choose to focus instead on the electronics. My time is better served by building systems than waiting for burn in and placing isolation devices. 

Imo, the principle benefit of footers, spikes, stands, etc. for speakers is the elevation of the speaker, not the materials used. Some industry members would disagree; so be it. That is why I have 2 dozen hard rubber hockey pucks on hand to elevate subwoofers, speakers, etc. BTW, what does Pass Labs use for "isolating" the XA200.8 Mono Amp? A very hard rubber footer that has similarity to a hockey puck. 

As can be seen, I don't fawn over every proffered improvement the industry promotes. Disagree? Great, build systems your own way.  :)



I was surprised at the comment about the amp stands Doug. I understand the realities of being a reviewer and needing to move these beasts around, but that doesn't mean that you should discount the efficacy of proper supports in a good system. I know that a proper stand made a startling difference in the sound of my tube DAC.
Oh, geez, not more anti isolationists!? Did I just wake up back in the 1980s? 😳
"The rest of us, who understand that an amp’s sound is no more harmed by placement on cinder blocks or furniture dollies versus a $10K audiophile stand, are managing quite nicely."

My commercial restaurant rack shelving (on casters) makes my amps tasty!
Welcher, thanks for the support! I’ll try not to lose your support in segments 2 and 3! :)



The rest of us, who understand that an amp’s sound is no more harmed by placement on cinder blocks or furniture dollies versus a $10K audiophile stand, are managing quite nicely.
I am saying that the hand wringing about how long to burn in an audio component is a waste of time

With these words you are now my favorite reviewer