I’d step up to a used Naim XS2, about $1700, or a restored tube integrated Fisher or Scott for about $1,000+.
Integrated amp recommendation
I recently bought a used pair of Swiss-made Piega p4L MKII floor-standing speakers. I am looking for a two-channel integrated amp to pair with them. Budget: $1,000.
Among the stated speaker specs: applied power rating 20-200 watts, sensitivity 89 db, 4 ohms impedance and frequency response 38 Hz-50 kHz. To me, the speakers’ sound can be described as natural, detailed and transparent, not aggressive and maybe slightly lacking in bass. The room is 12 x 20, carpeted but relatively bare. I listen primarily to classic rock, classic jazz and classical. I use a Bluesound Node 2i music streamer and CDs. Bluetooth would be nice but not essential.
Thank you for any assistance.
kudos to the person who did this -- well, this is basically what i do... albeit carefully and patiently buying used pieces -- there is no substitute for first hand experience of how some component will sound like, and work, in one’s system this is how i tried some 35-40 dacs in 3 years... |
I don’t think there were any bad choices mentioned. Other than power requirements, equipment is so subjective. I had a hard time deciding on an integrated, and ended up buying all 3 of my choices. It was just too hard to decide. I ended up with a Pass 250,Mac 352 hybrid and a Hegal 390. All 3 sound wonderful, just different presentation. Hope you come back and tell how you like the Musical Fidelity. |
Many good recommendations have been made. Just a note… since your speakers are 89db efficient with a reported 4 ohms impedance, the output impedance (or damping factor) of your amplifier is important. The lower the output impedance (or, the higher the damping factor), the better-sounding combination with your speakers it likely will be. Have fun. |
You should be able to find a used CREEK EVO 100A for ~$1000 (or less). I used one with Joseph RM25XL speakers and now with the "bit power hungry" Magnepan LRS+. The amp/speaker combo is great with either combination. Some reviews follow.
https://www.theabsolutesound.com/articles/creek-evolution-100a http://www.hifi-review.net/37-creek-evolution-100a.html https://www.stereophile.com/content/creek-evolution-100a-integrated-amplifier https://www.hifipig.com/creek-evolution-100cd-cd-player-and-100p-power-amp/ (the power amp is also what you get in the integrated version) https://www.hifipig.com/thats-all-folks/ (photo of Creek 100A driving a set of Harbeths)
|
Save some money, buy a Willsenton R8 tube integrated. It’s well tested on the audio market. Great KT88 tube amp that will drive your speakers with ease. Check YouTube for the Willsenton R8 and thank me later. Amazon carries them, in black or silver and black. Best tube integrated under $1500 bar none. |
In your situation recently. I got the Yamaha s801. 100 watts into 8 ohms my, 200 watts into 4 ohms. Confirmed by a third party website. The author also noted that its overall performance was excellent. Includes a dac and a phone stage. You can get it with a 30 or 60 day trial from one major online dealer or another. |
@phil59 - some good suggestions made here, but I'm with you on the 'stick to budget' approach. Especially buying used as you can turn things over and try different things to make that budget work for you before stretching it. Also stay focused on the character you're after - you noted warm for a modest room, and not all the suggestions go along with that. What's 'best' for one room and speaker may not be for yours, and reviews can help figure out prospects and eliminate others. |
Probably not a lot of people here have heard a Piega. I demoed one twice and it was really fast because of the ribbon mid. It looked pretty much like the one you have but had I think 1 more woofer/mid. It also had very little warmth or body. I would be looking for something with a darkish extra mid bass quality to it. Sorry I don’t really have a suggestion at 1k. Maybe an Nad? Not sure how they would do with tubes but could look at a tube integrated if it was a fit. Cayin and Jolida make some that would be in that price range used and I’m sure some others. |
I used to have a Rega Brio and changed to Schiit Ragnarok. It was a night-and-day difference to the better. I suggest you either try to find a used Ragnarok with a dac or buy a new one without dac. I would guess that the dac card is better than the Node and worth the money but it pushes the price north of $1500. On the other hand it will be easier to sell some other day if you want to. A used Ayre could also be a great choice. |
Of the most frequently recommended integrateds in this thread, several are above the $1,500 price point (up from $1,000), such as Plinius, Parasound, Belles Aria and Musical Fidelity. Of the others that meet the robust power requirement, Rogue Sphinx and Ayre AX7e are doable. This is my entry into higher-quality equipment, so I would prefer to start the so-called journey at a relatively reasonable price level. |
If you hurry, you might be able to snag the AYRE ax-7e used for $1400 listed currently on Audiogon. While I have not heard it, Ayre is in the upper echelon of American electronics and you could easily resell it if it doesn’t offer the sound you’re looking for. I bet it will be great, and I seriously doubt you can do better for the money. |
If you are looking for a little warmth and lots of current to drive your speakers with aplomb, from what I have read — Parasound and Plinius would be good choices. I have heard Belles Aria and now have the Aria Signature. They are both fine integrated amps — but as mentioned by mesch above, there is no published data on what it delivers into 4 ohms. You want something that doubles the wattage from 8 to 4 ohms ideally. |
i have owned the belles aria (twice), along with numerous hegels, ayres, some upper older musical fidelities david belles’ aria is a nice integrated, powerful, very stoutly built, nice phono stage in it too (the remote control is downright cheap though) sonically, i found the belles to have a little more of a brash personality - more treble energy, some sizzle, a little grain, compared to the more refined hegel and ayre sound... so it depends if you want that or your speakers benefit from a little more sizzle up top... the ayre, hegel and top flight retro musical fidelity amps (a308, muvista etc) provide a degree of treble sophistication of even higher tier solid state amplification (ample detail and soundstaging free of attendant electronic harshness) |
If I was looking for a used integrated amplifier in the $1500 price range the Belles Aria would be on my short list. It delivers 75wpc into 8ohms. My spearers are easy to drive however. I haven't looked extensively but have not found the Aria spec for 4ohms. Also not familiar with your speakers. Question is how much the speaker impedance drops below 4ohms. Not to over push the Rogue Sphinx V3, but there is a Stereophile review which includes a measurement section providing detailed account of this amplifier. Both Belles and Rogue are good companies to deal with.
|
I personally use a Peachtree Nova 300-Bluesound Node 2i - I use the Nova's DAC-; Pro ject CD transport and Harbeth 30.1 monitors in a very small square room. Night mare(!) but after much stress it sounds pretty good for such a modest system. They are giving these Peachtrees away but they are a good value. Lots of power for the money (class D but think of the environment). I play this thing all day. If I was to change and spend more money I would just change out another integrated with DAC. MacIntosh or Luxman or Hi Fi Rose (no DAC tho). Good luck, perhaps spend more now on Integrated unit.
|
Not familiar with your speakers, but I'd add to the recommendations of the Belles Aria. It's a fantastic integrated for the price (~$1 to $1.5k used). Based on so many positive online reviews of the Rogue Sphinx V2, I also tested it in my system and the Belles was much more natural and musical to my ears. Hope you find a good fit with your system! |