bpoletti
Responses from bpoletti
| VPI Ceramic Platter Brf, doesn't that depend on the style of motor pulley? | |
| DL-103 compatible with AA Puccini SE MC phono? Why not just try it and report back the results? | |
| Audio Technica AT-OC9ML/II Questions The OC-9ML/II is a very good cartridge. It will work just fine in your arm (it is generally forgiving of arm mass). You can always add more mass to your arm if you think it would improve performance. If you can pop for a Herron phono stage, even a... | |
| Cartridge and Phono advice for Classic 3 You can get a Herron VTPH-2 and a Lyra Delos. Cost is a few dollars over $5,000 but will provide excellent performance and great customer service. | |
| Can hear TV or Radio station via Phono stage ??? Are the satellite TV stations scrambled? | |
| Herron VTPH-2 Phono Preamp ATOC9MLII should be a spectacular performer on the Herron phono stage. IIRC, it is the cartridge that Keith Herron uses to voice his equipment.And yes, the VTSP-3 r02 and the latest version of the amps are wonderful. I was lucky enough to get that... | |
| Herron VTPH-2 Phono Preamp The best sound quality of a Herron VTPH-2 is that it has no sound. It just passes the music to the pre-amp. IMO, there is no better phono stage available at any price. | |
| VPI Aries owners Stringreen, a similar arrangement (and IMO a more effective isolation of motor vibrations) can be accomplished using light-duty Vibrapods under the motor. Also works well on TNTs. | |
| vpi classic works with music hall cruise control And the speed control will do little since the motor speed on the VPI is pretty much OK without the control. The SDS is all about voltage management. That's what makes the big difference. | |
| Phono preamp comparison/Pass,Herron,Avid Sure, but speaker control is in the design. Big transformers, large banks of ps caps and the like don't necessarily make an amp more capable of controlling a speaker. | |
| vpi classic works with music hall cruise control IMO, the primary function of the VPI SDS is not necessarily a speed controller but more a voltage regulator. It uses full voltage on start-up then reduces voltage when the table is up to speed. This results in a reduction in the pulse of the synch... | |
| Phono preamp comparison/Pass,Herron,Avid No problem with the Herrons controlling speakers. That control is in the design, not the weight of the front panel | |
| Phono preamp comparison/Pass,Herron,Avid I have not heard a better, more musically involving amp than the Herron M1As with the latest upgrade. I can only compare them to the Herron M-150s since I have not had anything but Herron electronics in my system for almost 15 years. | |
| Phono preamp comparison/Pass,Herron,Avid I have had extensive listening on the VTSP-2 and consider it as good as it gets. I have not had direct comparison of the VTSP-2 to other phono stages and only have heard it through other Herron equipment, but it is superb.Disclaimer: Keith Herron ... | |
| Original VPI Aries vs VPI classic 3 I had a big jump in performance when I added 3 x StillPoints to an original Aries with a JMW-12 arm. I hear more from the Aries / JMW-12 than I ever did on a Classic 3 using the same cart. And I'm not sure if it's PRAT, but music from the Aries se... |