Which Stands for Magnepan LRS (and other models): Mye, Magnariser, Sound Anchor, etc
FWIW, I’ve used Magnestands and Sound Anchors. On the smaller Maggies I definitely prefer the SAs as they raise the panels up off the floor and the result is added air and spaciousness to the presentation. The resolution and imaging seem to improve too. BTW, the SAs for the MMGs work for the LRSs. S.A. needs to update their site to reflect this. |
FWIW, I’ve used Magnestands and Sound Anchors. On the smaller Maggies I definitely prefer the SAs as they raise the panels up off the floor and the result is added air and spaciousness to the presentation. +1 I was a Magnepan dealer for many years and have owned most their models. Sound Anchors on the MMG/MMGi/MG10/MG12 and the new LRS. Grant's MyeStands are the absolute best for the bigger, taller Maggies. BTW, the Magnestands weren't really a stand per se. They were a reworked design by John (Peter Gunn). I've heard a few pair...marvelous. Really, really nice. Everyone should hear one of these at sometime. |
BTW, the Magnestands weren’t really a stand per se. You’re very right, and I wish I had the privilege of hearing the Magnestands. I meant to type Mye Stands--premature senility may be setting in around here! I had the Myes for the 1.7 but agree that Sound Anchors are the way to go for the MMG and LRS. In addition to the imaging benefits they hold the panels straight and rigid--actually that’s a good part of the reason for the benefits. |
Hi meiatflask I have a pair of 1.7i and looked into the Myestands. Frankly they are a little on the light side,so I found some diy sites and made my own with wide tube and heavy walls than filled them with sand. Worked great. If you have a local steel fabricator he can make the parts and you can assemble them cheaper than the Myestands. I can send you some photos if you're interested. |
I retired my old smg’s because the sweet-spot was just too small, and the stands pointed them upwards. I just got tired of working to get in the sweetspot all the time. Then I lucked out... I found a pair of MMG’s with magnerisers already mounted on Craigslist. I was (still am) in heaven. The full height Quasi-ribbon tweeter cured the tiny sweet-spot problem and the stands kept the sound where my ears tend to be...not up near the ceiling. If anything, the more vertical position helped open up the soundstage, as fewer sounds were directed at the floor, behind the speakers. The vertical stands did not change the need to have some serious distance between the speakers and the wall. Like all Maggie's, they still want to be well away from the wall. The MMG’s are smaller & lighter than the 1.7’s...so I don’t worry about the lack of triangulated support. They do seem a little delicate, but so far my boxers have not bumped into them. I do move them from against the wall to their listening positions and back, every time I use them 1-2x per day...and have had no issues with the stands. I’m guessing the LRS’ will be similar in weight to the MMG’s. |
Sound Anchors are OK but I do not think they make a set for the LRS yet. You might have to wait a little. You want the middle of the long axis of the speaker aimed right at your head. Also, Draw a perpendicular from the middle of the speaker to the from wall. Get Acoustic Tiles like these https://www.parts-express.com/sonic-barrier-fwp122-studio-acoustic-foam-wedge-panel-12-x-12-x-2-black-12-pack--260-547 and use double sided carpet tape to stick them to the front wall 2 wide and 6 high centered on your perpendicular. You may notice a slight drop in high frequencies but your image will improve quite a bit. |
One thing I like about the Sound Anchor stands for the Eminent Technology LFT-8b loudspeakers (like Maggies, a magnetic-planar dipole, though mounted on a woofer enclosure) is their 3-point design: the SA "stand" (a bit of a misnomer; is more a base) has a threaded hole on it’s underside for spikes at three locations. 3 points define a plane, all you need to support a speaker. With a 4-point design, if one spike is even slightly misaligned, the enclosure with not be stable. The Mye stand for the LRS, like that of all the Mye Maggie stands, supports the 4’ tall panel not just at it’s base, but up about 2/3 of it’s height with struts, a good idea. And, the base is a tripod design---three locations on it’s underside for spikes or whatever. I installed Townshend Seismic Pods on my SA ET bases, and am sold on speaker isolation rather than coupling. That may seem to conflict with the last sentence of the above paragraph, but there is more to it than that, and this is not the time or place to discuss that subject. The choice of stand will not require any repositioning: the speakers tonal balance will not be altered, only it's clarity, resolution, etc. If you haven't much experience with dipole planars, know that their distance from the wall behind them will drastically affect their sound. Generally speaking, the further from the wall the better. Most of us don't have a large enough room for a 10' distance, so 3' is often cited as a minimum, 5' being even better. Distance from the side walls is not critical, due to the dipole front-to-back cancellation creating a null to either side of the speaker. One thing that should be mentioned is the statement above regarding acoustic foam being attached to the wall behind the LRS. There are two ways to manage the rear wave of a dipole planar: absorption, and diffusion. If you are going the absorption route, a far better choice than the acoustic tiles mentioned are any of the many acoustic panels available containing Owens Corning 703 (GIK Acoustics being a popular one). For diffusion (the random "scattering" of the rear wave), an economical offering is the Gridfuser from, again, GIK. Absorption is a good choice if your listening room is too bright, diffusion good for a room tending towards the warm side of neutral. |
Rob here from Magna Riser. I currently offer three different LRS designs that are all affordable and musically engaging. All have great reviews from owners. I just took delivery of a new pair of LRS. Most people don’t know that some of my designs go through six months of development with multiple prototypes being built and hundreds of hours of comparative listening sessions refining my design options. Then the designs are field tested in owners homes after in house testing. Some of our models were tested on speakers owners send to us to help in the R&D process. One Maggie was in house for 9 months or possibly longer. So there is a lot of listening involved. I purchased the new LRS because I will begin looking at creating a new model exclusively for the LRS using some of the insights we have from working on our 30.7 prototypes. The new LRS stands will probably offer options like tall vertical rear supports and at least three or four finish options which may include matching trim pieces. None of the needed design work can take place without having a set of the LRS back in house for an extended time frame. The investment in the speaker alone plus all the needed materials needed to create perhaps four different design prototypes out of dissimilar materials guarantees that I will not see a profit on the new model for an extended period of time.The new LRS design may not see the light of day for six months or longer or possibly never if it does not cross the required sonic threshold. Just wanted to share some information since our products were brought up here. Magna Riser does offer a money back guarantee on every set we sell and each includes a set of our replacement jumper wires. I am a fellow Maggie owner, passionate about music and also fanatical about getting the most sonic performance from my speakers. |
Ok. magna riser, you present a compelling argument, and quite frankly the neither the mye or sound anchors sound like their designs are really perfect for the LRS. So should I consider one of the three current stands that works for the LRS, or should I be patient and wait for the stand specifically designed for the LRS? |
I never tell anyone that Magna Risers are the best or only aftermarket stands worth considering. I do think that they are certainly among the most well researched. I have tried different metal types, gauges, and geometries, combinations of different type metals and experimented with alternate materials such as carbon fiber, kiln dried woods, and composites. We experimented with heat treating, shot peeing and even stress relieving bulk metals. Some of our models use constrained layer dampening, tuning blocks or resonance tuning plates and dampeners with interference fit. Some use 6 different build materials in combination and take more than 20 hours in the build process. Each is resonance tuned in an extended listening session that can be as long as 4 hours. Every change in design made a difference, some for the good some with negative sonic contributions. In the end I dial in the combination that allows the stands to enable the speaker to more fully realize the inherent potential of the specific Maggie model while maintaining the “Maggie Magic” while also providing for improved style and stability. These are limited edition built to order stands. You can check out our three LRS designs on our magnarisers.com website and see think pieces on our designs over at our Magna Risers Facebook page where you can request a list of owners comments. We have dozens of stands on LRS’in owners homes and none has been returned because owners could not hear the sonic benefit of having them in their system. In fact some owners write saying I should charge more. In the case of the new yet to be constructed LRS stands mentioned earlier I will say that they may not be available for quite some time and also give you a heads up that the cost will of necessity, because of the added complexity of the design and use of expensive exotic metals, be significantly more higher priced than the cost effective pricing of our three current offerings. |
I don't own Maggies but if I did I would would either have them "gunned" or get Magna Risers. Rob recently made me a set of risers for my Acoustat Model 2s. It took a little while for the work to be completed due to it being a custom job he took on, but Rob was very communicative through the entire process and the work was first rate and quite economical. |
@meiatflask, "gunned" refers to the Maggies that are reworked by John from Magnestand: http://www.indiespinzone.com/magnestand.html |
I DIY’d my own, based on this design: http://www.integracoustics.com/MUG/MUG/tweaks/green_lantern/ Quite simple, about $60, and work better than the much more expensive commercially available products. And yes, they do improve the sound, |
Also you can raise the LRS up about an inch off the floor using the supplied steel legs. Just get 4 washers and put them on the screws which hold the feet to the speaker then you can raise the speaker all the way in the slots on the feet. This puts them about an inch off the floor. Also I got some weatherstrip and put it on the bottoms of the steel legs so they don't scratch a hardwood floor. And with the bottoms of the speakers on the floor sooner or later you will wear out the fabric on the bottom of the speakers. |
