Using Two Subwoofers with Two 2-Channel Amplifiers.


I am considering using two Subwoofers with two 2-channel Amplifiers using the speaker level inputs and outputs on the Subwoofers.  Each Amplifier is currently connected to identical pairs of Speakers.  Is it better to connect so that there is a dedicated Subwoofer for each channel (Left channels of both Amplifiers wired "through" one Subwoofer, and both right channels through the other), or dedicate each Subwoofer to an Amplifier so that L/R channels of each Amplifier go to a Subwoofer?

This is for a vintage system that I am using for music only.  I'd be happy to supply equipment details if that matters.  Thanks!
audiostick

one amp feeding the two subwoofers should work well.  connect the high level leads direcly to the used speaker terminals on the amp, left to left, right to right.  

@stevermanjohnson question about you're dual JL sub's?

Are you using them AND the external high pass filter before the signal hit's your amp's.

I've heard pros and con's of external high pass filters in stereo set ups (JL says yes, REL says no, PS Audi Paul says no).

JL also discourages high level connections in favor of line connections (REL and Paul disagree).

My last question is, how would everyone recommend wiring dual stereo subwoofers with mono block amplifiers (each amp with 4 speaker posts).

Option A. Running a wire from each speaker post of both the right and left amplifier to the right and left subwoofer?

Example: Right amp has two positive wire and two negative wires going to the the right subwoofers two negative and two positive high level connection points.

 Option B. Running only one positive and one negative wire off the right amplifiers speaker posts to only the right high level connections of the right subwoofer (leaving the left channel positive and negative subwoofer high level connections open).

Example: Right amp has only two wires, one positive and one negative, off one set of its speaker posts going to only the right subwoofers right channel positive and negative high levels connections.

My thinking is if each right and left amp has four posts, and each right and left sub has four wire connections, then I should connect them all (right amp to right sub etc) rather the just two of the four high level connections on the subwoofer.

Anyone car to comment how the high level connect dual stereo subwoofers in a dual mono block stereo set up?

Thanks

@almarg - Al, great observation, and thanks for the heads-up.  The amps are bridge-able, but that's not the way I'm using them due to Speaker resistance loads.

I'm still Subwoofer shopping, but have made-up my mind that I would not be dedicating a Sub to each each channel based on information I've dug up on other posts.  What you've stated helps confirm my decision.   Thanks for the input.
Audiostick 7-21-2018

Is it better to connect so that there is a dedicated Subwoofer for each channel (Left channels of both Amplifiers wired "through" one Subwoofer, and both right channels through the other), or dedicate each Subwoofer to an Amplifier so that L/R channels of each Amplifier go to a Subwoofer?

Audiostick 7-27-2018

I’ve come to the conclusion that the fact I’m using two Amplifiers is irrelevant since the Amplifier does not "see" the Subwoofer(s).

The amplifiers won’t see the subs in the sense that the subs will present the signals provided by the amps with a very high impedance, and consequently draw a negligible amount of current from them. However, if two amplifiers are connected to the same sub I can envision several kinds of ground-loop and other ground-related issues that may arise, depending on the designs of the particular amps. Keep in mind that with that approach the negative output terminals of the two amps would most likely be connected to each other, via the sub, since both of those terminals would presumably be connected to the sub’s internal ground. That doesn’t seem like a good idea to me.

And if by any chance the amps have balanced or bridged outputs, meaning that their negative as well as their positive output terminals have full amplitude signals on them, blown fuses, damage, and/or pyrotechnics would be entirely possible with that approach.

Regards,
-- Al
SVS is a great choice.  They make a great sub.  I had two REL subs and could never get them to integrate properly in my room no matter where I placed them.  I now have two JL Audio F113 v2's and with their DARO technology, it was a breeze.  Now most people don't even know they're on, the integration is so seamless. 
I've come to the conclusion that the fact I'm using two Amplifiers is irrelevant since the Amplifier does not "see" the Subwoofer(s).

It appears there are proponents for connecting two Subwoofers both in stereo and mono, so I will most likely experiment myself.

I initially asked the question because I was thinking in terms of a vintage system I have, which has no Sub outs on the Pre Amp, and only room for one set of speaker connects on the Power Amps.  Thererfore, I'm looking for Subs that have Speaker level Inputs and outputs.

A side note: Its been frustrating researching Subs for this music only system.  Everyone always talks in terms of "This Sub will bury that Sub".  I don't want a Sub that will bury anything.  I just want them to supplement a vintage Two Amp, four Speaker music system that lacks low end.

There seems to be allot of love for REL.  I had decided on SVS to supplement a different music system I have that features Marin Logan Motion 60s.  I will have to look into the REL's.  Thanks.
Here is my setup which too me a while to get the sound up to the level that I was looking for......
2 Channel Stereo with 2 Channel Subwoofer Setup
Martin Logan Montis ESL Speakers which each have a 10" Driver with DSP and a 200 watt amp. (not enough low end, needs more)

2 REL S3 Subs
with one on the Left Channel, and the other on the right channel.

Using the RELs coming right off my Krell KSA-200S Amplifier's speaker connections. This is what REL recommends.

The RELs are placed on the inside of the Martin Logan Montis. Right next to each Montis. This allows for fill into the middle of the presentation.
Most say put the RELs on the outside. Bull, wrong. Tested and tried. The Stereo Subs should be on the inside and setup in stereo. REL has a video on how to connect the speaker outputs of the amp properly.

When I went from a Mono 2 Subs to Stereo 2 Subs setup..... WOW!! The difference is instant, and allows for a much better image. I cannot over stress how much better any speaker system can get with what they call "The REL Effect" using the input from the speaker leads from an amplifier. Paul the owner of PS Audio has a YouTube video about Subwoofer setup from the amplifer speaker leads. Oh, he glows when he mentions the REL Subs. The whole system blends and gives even the midrange a tangible improvement. The secret is adjusting the RELs to just be able to hear them, and then just back off on the REL volume control just a hair.
I know like I sound like a REL fanboy. I am. But they blend so much better than others. The are lightning fast, that's the secret. It's in the crossovers and the actual driver design. They can keep up with the Martin Logans fast transient response. The blend is what sends these out front in sub design for 2 channel audio systems.

JL Audio has a great sub, but for 2 channel music, JLs are an earthquake, and RELs are a part of your speakers, and they don't let themselves overpower the speakers. Take for example.... Revel Ultima Salon 2s. Great, but mind blowing with REL S series or Reference series in stereo pairs. REL has a T Series, and it works quite well at a much lower price point. But I wouldn't use them with speakers costing a lot of money. The S Series is a huge improvement. But, in the same token, you can get 2 Subs at a reasonable price. And 2 T Series RELs are better than no RELs are just one sub.

If you are listening to 2 channel audio (In my 40 years experience), 2 subs are required to get the proper soundstage and low end of the original recordings. Subs with 2 Channel Music should not stand out and act like a bully. Most subs are bullies, and that's why many audiophiles don't recommend having them.

Speakers that cost ten times as much as us mortals can afford have added 2 RELs to their system and come away with their jaw dropped. 

I would have not believed it myself until I bought them.

I now have 2 more REL S3 subs (total 4) that I have yet to take out of the boxes yet to experiment with.

The word from REL is that you can use multiple RELs and surround the room with their effect of giving body to the music. Maybe a few months from now..... I will place the other 2 RELs behind me, and see what happens. If you look hard enough, REL sells sometimes to dealers a recertified unit. Or watch the used audio websites for deals. Lastly, if you own Martin Logans.... it is your duty to pair them with a couple of RELs. I know of quite a lot of Martin Logan owners that are happy with what a transformation they experience with money spent. There are cheaper subs. Not a single one can put such a shot of Viagra into your speakers like these babies. Dennis
Sorry, but just to be clear, when to say "Mono" or "Monaural" you are referring to connecting Left & Right channels to each Sub correct? My initial thought was that this might confuse the Sub, but it sounds like you guys are saying that this is not necessarily the case (".. canceling standing waves..")
Depends on the connectivity options your subwoofers offer. My only high/amplifier level experience was with a REL Studio III using its proprietary cable. Maybe someone else here can answer your question.

By "standing waves" if you're referring those unusually bass heavy locations in your room they can be addressed by experimenting with subwoofer locations and feeding the subs a summed, mono, or monaural signal.

Eventually your setup will be as unique as your room and the system being used.  
I have both subs (they're different models from the same era, a Q150e and a Q108II...10" front firing and 8" down firing respectively) taking both channels just like when I used only one sub (which worked fine for years). I am fine with this, and the bass is coherent and stereo (except the low bass which isn't but seems like it is for the reasons previously described). Besides, one of the RELs sometimes is used in a nearby window to add bass to the smallish monitors I use for outdoor deck speakers (also in the windows for that purpose), and if it was hooked up to only one channel it wouldn't work like I prefer. I play bass, I'm a sound engineer, and the benefit of 2 subs taking all the low bass equally does have nice results overall as sort of a "mini storm" rig.
Great input everyone, thank you very much.

@wolf_garcia  So if I am understanding you correctly, you have both Left and Right channels wired to both of your Subs?

@m-db  Your "unusually redundant" comment kind of hit home.  It makes sense that If I am dedicating a Sub to L/R channels, it should not matter if a Sub has either one or two Amplifiers connected to it.

Sorry, but just to be clear, when to say "Mono" or "Monaural" you are referring to connecting Left & Right channels to each Sub correct?  My initial thought was that this might confuse the Sub, but it sounds like you guys are saying that this is not necessarily the case (".. canceling standing waves..")

FYI, Mains are two sets of Klipsch Kg-4s.  38 Hz - 20 kHz +/- 3dB at 94 dB SPL.  Room is HUGE (finished basement).
I am using two stereo JL Audio F-113 subs and I feel that 2 subs fill the room much more than one does. I have mine located close to the mains.

ozzy
+1 wolf_garcia regarding a monaural or summed below an approximate crossover point depending on the speakers and the room.

With the exception of subwoofers by REL manufactures include the convenience high level connectivity for those who lack source RCA outputs, experimentation should be seriously considered.

Review the subwoofers manufacture instructions when using high/amplifier level connections. Connecting both amplifiers Left channel outputs to one subwoofer seems unusually redundant.

With an honest respect to zipost's experiences. My only sub installation with very small mains that began their in room measured falling off at 97Hz stereo high level connectivity did sound subjectively better to the owner.

With main speakers falling off below 50Hz monaural has always produced a more desirable effect in my experience. It also liberates subwoofers for the always unique crawl test sub locating and an overall improved performance in speed and room node control.   
Two channel with subs hard to integrate them together.  But if done correctly can be really amazing.  I strongly recommend:

1) using same amp driving all channels.  The highs, mids and bass.  

2) same interconnects and speaker cables for all unit. 

3) no electronics crossovers Only passive crossovers.

Alot of people think that 60hz and below the bass doesn’t matter when it comes to coherent, huge mistake.  It makes a biggest differences when it comes to two channels critical listening.   


I use 2 REL subs but they're both mono as the aural "ques" for bass position in the soundstage, in either classical or jazz or anything else, is unaffected in my system...the plus is since the subs are doing the same thing they act as moderators for each other by canceling standing waves, which would not happen if only one sub was producing it's stereo signal without the other sub...the subs are set at a low enough frequency (matching where the mains roll off) that stereo imaging is still spot on.
My vote would be "yes" to using two sub woofers.

In my previous setup I had a "Y" cable to combine the left and right preamp outputs into a single feed to the sub.  That worked well.

But with my latest setup, which is much higher end, my dealer and a number of my audio buddies argued for me to deploy a pair of subs, one for each channel, and I must say, the "visceral" experience is better, especially when listening to classical music, where the double bass sounds might be coming from one channel.

When I was struggling to integrate this pair of subs, at one point I moved them to behind the listening position, and the result was not good.  Most of the music coming from the main speakers was well positioned, but the sound stage for the low frequencies was "all over the place", the "sound" coming from the front, but the "feel" coming from behind.