bpoletti
Responses from bpoletti
| Turntable Setup by Ear? The best set-up is the one removing as many variables as possible. Using a protractor and digital scale will leave VTA as the variable. That is more reliable and faster than guess work.Digital scale (reliable enough for our purposes) from DealExtr... | |
| For VPI Unipivot Owners, do you use antiskating? I have a JMW-12. It doesn't have anti-skate and I do not attempt to put any torque into the leads to create anti-skate. | |
| Herron M1-1A monobocks, what do you think? Mitch2 - What amps were those? | |
| Herron M1-1A monobocks, what do you think? I use the Vibrapod cones under the VTPH-2 and VTSP-3Ar02 chassis pointing up. I have not removed the stock feet. Biggest improvement came with the phono stage but the pre-amp was better, too. The Vibrapod cones are free standing, no studs coming o... | |
| Herron M1-1A monobocks, what do you think? I also have the entire Herron set-up (VTSP3Ar02, VTPH-2, one pair M1-1A, one pair M-150, all Herron cables), except for digital. The M1-1A amps are wonderful and a great match for upstream components. I have not had a problem with low impedance sp... | |
| Yet another contender for my Klyne 6PE: ARC PH5 DAniele - Contact Herron (Keith Herron) and ask about used units, even a VTPH-1. I have not heard ANY ARC phono stage that bests Herron phono stages. | |
| Hurst motor rumble? I've never thought about "dropping the needle" onto anything that didn't have some kind of spiraling groove toward the center of the turntable. My tastes in music don't venture out that far. If the noise doesn't happen during playback, who cares? | |
| Rega arm vs Sumiko Rega 250 arm? Good for toasting marshmellows. MMTs are for playing vinyl. | |
| Entry level Phono Stage for Dynavector 10x5 Maybe try to find a used Herron VTPH-1. It is an excellent phono stage compared to other used unit in that price point, significantly better than anything new at that price point. Or just pop for a Herron VTPH-2 and not worry about upgrading the p... | |
| Yet another contender for my Klyne 6PE: ARC PH5 Agree with the Herron choice. I have a VTPH-2, plenty of gain, spectacular performer. I have not heard anything better, not heard anything as good. | |
| favorite phono cartridge I've had several carts. Currently using my favorite, an AT OC9/II. I;ve tried a few others including a Lyra Clavis da Capo. I just like the OC9/II the best. Works exceptional well with a Herron VTPH-2. | |
| Personal Turntable Evolution 1. Original AR Shure cart2. BSR(?) Shure cart3. Modified original AR with Grace 707 Shure cart4. Last version of the AR Shure cart5. Home built with Linn Basik arm Audioquest HOMC cart6. VPI HW-19 III Premeir FT-3 (Sumiko arm wrap) AQ HOMC AT OC9/... | |
| Phono stage matching - how critical Lewm - Minimum should be 1:100 ratio between the two. It is supported by more than one manufacturer. | |
| Phono stage matching - how critical The more critical matching is the phono stage to the preamp / line stage. If the phono stage is a tube unit with higher output impedance and the preamp / line stage is a low input impedance solid state unit. the mismatch will negatively impact the... | |
| Cary or Conrad Johnson phono preamp? I have to second the Herron VTPH-2. I have one because I haven't heard anything as good. At any price. It is tubes, but without bloat or excessive warmth, and it's dead quiet. |