SBIR - Speaker boundary interference response.
As noted, perhaps not fully correct, but as the frequency drops for a dynamic speaker, the radiation become omni-directional. The wave reflecting off the front wall is reflected, with not a lot of attenuation, and then cancels the front wave of the speaker. The critical distance is 1/2 wavelength as that will be completely out of phase.
Ideally you want to be far enough from the front wall that the round trip distance is > 1/2 the wavelength of a fairly low frequency. Put another way, the distance is > 1/4 the longest wavelength. 3.5ft, and you just created a suck-out at 80Hz. Even at 5 feet, you are still hurting important bass frequencies, and this is not stuff easily corrected if at all with DSP.
Counter-intuitive, but the solution is to put the speakers closer to the front wall, and then treat the walls with absorption. Not those those trinkets I see in audiophile pictures that cover a small portion of the wall. You need to cover a good portion of the space behind the speaker, and the absorption need to work at a low enough frequency to prevent the SBIR cancellation. You will get boundary reinforcement by being close to the front wall, but this can be corrected with DSP.
