Why Isnt Techincs 1200 Considered Audiophile?


Technics is known for its rock solid build quality low wow flutter, low noise rock steady speed, great torque and powerful motor so why isnt it given the accolades as a musical turntable?
vinny55
The SL1200G is a pretty audiophile turntable.

Although it looks like the older version, its a complete from-the-ground-up new design.

We've mounted both the regular and 12" Triplanar tonearms on the new SL1200s with excellent results.

This is one of the most speed-stable machines in production. It is also well damped (including the platter) against mechanical vibration. So it is an excellent platform. I feel that the arm and platter pad are its weak points, but the arm is a whole lot better than its predecessor being made of better materials with better tolerances.
@bdp24  when it comes to Technics i'm fine with my EPA-100mkII Boron Titanium with Rubby Ball bearings with the lowest friction, VTA on the fly etc. I think it's hard to beat by any new tonearm at $5k range (i've never tried more expensive new arms than my Reed 3p "12). Anyway a shoort version of Reed tonearm could fit in the SL1200GAE, but the EPA-100mkII can't fit. 

I think the best vintage tonearm for inexpensive old SL1200/1210mkII is Victor UA-7045 which is normally under $750 in perfect condition or even lower.    
@chakster, I have to agree with you on the looks of the Audomods. All those holes drilled into the arm tube (admittedly for a good reason, and apparently providing a substantial benefit) is quite unsightly, especially in the matte finish-version. Pretty ugly. The polished version looks much better. But if you can see past that, the arm is really well engineered and built. A great value in a pickup arm, for those who value value ;-). Another kinda ugly, but high value arm, is the TransFi Terminator, also hand-built by a Brit. They are really good at record players, aren't they?
@bdp24 

I know this tonearm, i remember when Zu Audio released their ZU SL1200 mod with Rega RB-1000 tonearm back in 2011: https://www.zuaudio.com/low-voltage/2011/03/zu-sl-1200-turntable.html 

Later the RB-1000 was replaced with a better Audiomods tonearm, but the armwant is still from Rega. Maybe it's not correct word "tweaked rega", but i new toneam with drilled Rega armwand. Anyway Audiomods was fine for Zu DL-103 low compliance cartridge. This is the oppisite to the Technics stock tonearm designed for mid compliance MM and many other tonearms than can be installed on SL1200mkII for higher compliance cartridges. As i said it depends what cantridge the owner is gonna use with the arm. Do you find this Audiomods toneam attractive ? I'm not, sorry. 



Poor Jeff at Audiomods. He does everything he can to prevent his unique arm from being incorrectly, mistakenly described as a "tweaked Rega", yet some continue to do so. Why? That is akin to describing a custom-designed, hand-built automobile, onto which the builder has installed, say, BMW wheels, as a "tweaked BMW".

Jeff personally designed, and himself hand-machines, every single piece of his arm, with two exception: KLE Innovations RCA plugs (fantastic!), and the arm tube, which he sources from Rega. The Rega 303 arm tube (which receives drastic re-engineering and machining from Jeff) is the only, repeat ONLY Rega part used on the Audiomods arms (two models available). Does having the Rega arm tube make the Audiomods a "tweaked Rega"? Only if you ignore the fact that Jeff machines the arm’s unique bearing assembly (with ceramic ball bearings), yoke, variable-mass/constrained layer-damped counterweight, anti-skate, turntable mount that provides arm height and VTA/SRA adjustment (with optional micrometer available), internal arm tube stiffening and very-high quality silver or copper wiring, arm rest---all of his own design, and far different from Rega’s. All this info and more are available for viewing on the Audiomods website, so there is no excuse for the arm to continue to be mischaracterized as a "tweaked Rega". With the sole exception of the arm tube, and that single part alone, the Regas and the Audiomods couldn’t be more different.

Got it?!

This is a great turntable. Definitely audiophile quality with the right cartridge.
melm, Is this like the Emporer's New Clothes?  Only the most discerning are able to see that he is not naked.  Or that the SL1200 is not as good as it sounds.  
The Technics is one of a number of audio components that measures well (by certain industry approved standards) and sounds, well, not so good.  The quick answer is that means you're not measuring the important stuff.  With a light platter the constant checking and correcting micro speed changes imparts a particular coloration and timing distortion.

Michael Fremer put it well when he wrote:

"Regulating a direct-drive motor's speed with a phase-locked loop produces tight speed control and measurably low levels of wow and flutter, but the motor's constant, ultra-high-speed hunting and pecking as it over- and undercompensates in the attempt to produce a consistent speed can create a jitter effect in the mid-treble to which the human ear is particularly sensitive, adding a hard, brittle texture to music. That describes the sound of Technics' now-discontinued SL1200 series of direct-drive turntables, and explains why, despite their high build quality and relatively low price, few are used in serious audio systems, though some listeners claim that these 'tables can be modified to improve their sonic performance."

Certain direct drive TTs have overcome that problem principally with very heavy platters imparting a strong fly-wheel effect.  They are very expensive though going back to the Goldmund, and more recently the VPI and others

As with most things, hearing the problems may depend on associated components and the discrimination of the listener.
The Audiomods is a tweaked Rega tonearm, there are many option for SL-1200mkII and it depends which cartridge are you gonna use. Also detachable headshell is a nice option. 

I'm still not sure which model of turntable the OP is tying to discuss, but Technics tonearm is not bad at all, the old one cost just $150 new, do you know any other tonearm for $150 that will give you same quality? Fluid damper from KAB is easy to add, and when i tried Technics EPC-205c mk4 cartridge on the stock toneam it was amazing. 
WRT...
 the arm is quite substandard
Hmmm - but is the rest of the TT "up to snuff" ?
- because Jeff at Audiomods believes it is - if you add one of these...

http://www.audiomods.co.uk/technicsarm.html

I have an Audiomods Classic II arm with the bead-blasted finish and it is a superb addition to any TT.

A friend has the 1200 with the Series Five arm built for the 1200 and he loves it

http://www.audiomods.co.uk/completearms.html

I think with an Audiomods arm, the 1200  is well into audiophile teritory.

Regards - Steve


Do you mean the original SL1200 mk1 ?
It’s pretty old, but if you will watch this video you will see than John Grado still use one of these at grado labs to check the cartridges. In fact it was a hi-fi turntable that pioneers of the deejayin start using in the 70s in NYC on block party jams.

Later another hi-fi Technics became the industry standard, it was SL1200mk2 with +/- 8% pitch control and new Technics tonearm. It was not made for the DJs, but served professional DJs till today. In fact they made a million copies and it was a champ of turntables on the global mass market until it was discontinued not so long ago. This turntable can be upgraded by any user who would like to transfer it to a high-end by replacing a stock tonearm and armboard, footers, wires, or even power supply. Actually it’s better to buy SP-20 (made in 1976), this is what i compiled for a friend.

Technics true High-End turntables were made since the 70s for broadcast industry, models like SP-10mkII (which i’m using) and SP-10mkIII (from the 80s) considered a High-End today. Tonearms like EPA-100, 250, 500 or EPA-100mkII or professional version of the EPA-100 are amazing tonearms, they are highly regarded today, especially the rarest EPA-100mkII ($2-3k).

Now we have SL1200GAE, SL1200G and SL1200GR and they are high-end turntables, many people are blown away by the quality, they are completely different from older Technics turntables, but still can be upgraded with better tonearms. I'm not happy that they looks like an old SL1200mkII (i believe many people too), but seems like the quality is top notch. This is a new source for removable armboards which looks like the original, but made for different tonearms.

If you want the reference there you go: https://theaudiophileman.com/sound-vision-2018-technics/
official prices is UK should be about:
8000 pounds for SP-10R
and 14000 pounds for SL1000R


The 1200 is a DJ component not designed for audiophile use and it sounds like it in particular the arm is quite substandard. It is a very rugged and reliable component which of course is a basic requirement for use by DJ's but for the money it is easily bettered by any one of many turntables properly designed for use in a a Music Reproduction System.