I used to leave my pretty good system on all the time because it always sounded better after an 1 hour or so of warm up.
After some years had passed the system seemed less pleasing I did all kinds of tests and just shut it off one day in frustration.
I now know that my particular amp sounds best when a little warmed up but begins to sound coarse after 4 hours or so (yes it runs very hot, always has).
I have contacted the manufaturer who says he has never experienced this and would be happy to look at the amp. Its about 90 lbs and needs to ship to the opposite coast so I'll wait until things get worse.
For now, I turn it on when I wnt to listen and shut it off afterwards. |
1. Placement has a _huge_ effect on what you hear. Inches matter. If you didn't mark your old speaker location with tape, match up the spike holes, etc. they're in a different location.
2. Your hearing adjusts to consider what it hears on a regular basis as "accurate." Without listening to enough live music "accurate" isn't. Changes from this can be good or bad.
3. Expectation bias could have changed your impression of your new speakers. |
I assume you had two beers in the process of testing speakers. By the second beer, your blood vessels in your ears opened to their fullest, allowing you to truly hear the speakers for the first time! Did you happen to dim the lights, or have a girl in the room with you. All audiophiles know these factors weigh heavily on the sonic character of the equipment. |
I agree with Phd, I think the answer here might be that after components are on for a while, the circuits stabilize, they reach their optimum operating temperature & the sound will usually change for the better, could be for the worse. It may be you like the sound better before this happens! My second best guess is the listener has not acclimated themselves to the "flaws" of the most recently attached speaker until some time passes. All speakers have a personality and none are without flaws. |
My 2 guesses which I wouldn't value at more than 2 cents (that's adjusted for inflation too).
First, all the adrenaline that you built up and blood you got flowing from moving and positioning the speakers caused your ears to be more accurate?
Second guess, our memories play tricks on us. It's a proven fact.
Actually, a though just occurred to me; maybe the connection of your speaker cable was better the second time around. They do say to reconnect (actually clean) cables and ICs every once in awhile. |
I have noticed this also. My opinion is that the overall grounding configuration has been altered and does not return to its previous state until all components are turned off and then back on again. Try cycling everthing off and then back on and see if the difference persists. |
I have noticed osmething like this many times myself- usually when hsopping for new gear. Swappoing components in and out of the system has often made the system sound better. It has nothing to do with keeping the system on vs. shutting it off, because I do not leave the amplifier on, and don't shut the cd or pre off when swapping components. I think it has to do with cleaning off the connectors. I have noticed it more when changing electronics than speakers. Maybe this is becasue the RCAs are more sensitive / scrape themselves clean better.
Why is this getting more skepticism than cryo-treated electrical outlets? |
I'll second both timrhu and zargon's hypothesis. |
When cold some power amps boost the bias until they warm up thus making speakers sound sweeter. But my vote's for your imagination and its unlimited bias :^) |
Old speakers sounded better than I remembered. This is quite possibly true! New speakers sounded better than I remembered. This is probably true since you just listened to the old ones, and the new ones sounded so much better! |
Probably your imagination. |
I think the answer here might be that after components are on for a while, the circuits stabilize, they reach their optimum operating temperature & the sound will usually change for the better, could be for the worse. It may be you like the sound better before this happens! |
Mt10425 is a funny guy. Maybe the reconnection process got rid of some gunk ???===Maybe you got a better posistioning job on the speakers second time around-- Or call the gohstbuster guys?? One more---If it sounds better unplugged think how much in wear and tear and juice you could save. |
Who knows, could be that it'll sound better unplugged all the time. [:0> |
