What makes a BMW 230 cost twice as much as a Toyota Corolla? After all, they are about the same size - the Corolla is probably a little bigger. What makes Veuve Clicquot champagne cost four times as much as Freixenet? After all they both come in the same size bottles with very similar corks. Just in case you think that this is purely snob appeal, I have driven both cars (quite recently) and drunk both champagnes, and I can tell you from personal experience that they do not drive/taste the same at all. I have a $25 DAC from Ensinin [?] and a $99 DAC from Schiit and even with my hearing loss and untrained ears I can tell you from personal experience that they do not sound the same.
What makes a DAC so expensive?
You can buy a Cambridge Audio AXA25 25 Watt 2-Channel Integrated Stereo Amplifier | 3.5mm Input, USB Input for $225, and most DACs seem more costly.
I'm wondering what it is that makes a Bifrost 2 almost as expensive as an Aegir and 3x's as expensive as the Cambridge product, above. I would have thought an Aegir would out-expense a Bifrost by a factor of two or three. What are the parts that make the difference?
I'm wondering if the isolated DAC concept is one that comes with a "luxury" tax affixed. Can anyone explain what I'm getting in a Bifrost 2, or other similar product that justifies the expense...?
Thank you.
I'm wondering what it is that makes a Bifrost 2 almost as expensive as an Aegir and 3x's as expensive as the Cambridge product, above. I would have thought an Aegir would out-expense a Bifrost by a factor of two or three. What are the parts that make the difference?
I'm wondering if the isolated DAC concept is one that comes with a "luxury" tax affixed. Can anyone explain what I'm getting in a Bifrost 2, or other similar product that justifies the expense...?
Thank you.
142 responses Add your response
i reach and create a very great S.Q. in the last 2 years: dynamic, clarity all across frequencies,details and more, soundstage in all the room, imaging with depth in near listening and in regular position, 3-d holography, name it... All that with my controls of the mechanical embeddings, and all this time, i never think one second about my DAC.... It does not exist at all.... And all this time this thing that never has signal his existence to me, never did’nt hold me back ever, in each and every one step toward better S.Q..... This is what i call a DAC....i will never look back.... |
When it comes to the DAC: Is distortion the only word (or the most important...) in transparency AND full realization of the recorded sonic imagery? I have been lead to believe that some DACs handle detail and soundstage differently than others and I'm wondering if these features (of subtle detail and soundstage) are fully reflected in distortion figures. This is to say, FOR EXAMPLE, what kinds of (general) differences might be reflected in two different DACs, with the following THD+N measurements:
|
I am in the get a transparent DAC camp as @djones51 mentioned. I got a Benchmark DAC3B which I was going to use as a DAC on my lesser bedroom system. I was going to get a much costlier DAC for my office system. However, when I added the DAC3 to the Benchmark HPA4 preamp in the office system I was of the opinion that changing this sound signature would be foolish and costly on my part. It sounded great and transparent. My speakers are going to determine the tone of my system. |
@listening99 i won’t get into the ’accuracy’/measurements debate... it is old hat, no light all heat - i am into this for musical reproduction that pleases me, in my listening space, really don’t care about the rest... there is a place for measurement in hifi, but to me it is limited, the ultimate test is listening pleasure produced, we are not buying digital thermometers here i think it is also a fools errand to try to ’justify’ the last 10% of performance... some want it and can afford to go for it, others can’t even hear it nor afford the pursuit -- value is about money... end of the day, money in and of itself is over-rated if you have enough to be comfortable ... it is the experiences, enlightenment and joy that money may buy that matter also, don’t get sucked into used market availability of X as a metric of value... used items can be good but they are available because they have been successful, sold many units, after a while, end users want newer, so they re-sell... used porsche 911’s aren’t lousy sports cars because there are many used ones for sale, just the opposite yes ps directstream has features, but so does denafrips... my ares ii is fun to play with, with its various nos/os and filter options, very cool piece, lots of dac for what you pay i am not trying to talk to into a vs b, just pointing out the nuances and manifold issues in the consideration good luck have fun |
Transparency means that the distortion and noise that exits the analog outputs is so low it’s beyond audibly for humans. If you take a dozen DACs and they all measure below the threshold of hearing then how can one be more transparent than another? I will mention not all DAC manufacturers strive for transparency which is why some have a sound signature. IMO DACs should be transparent if you want to color your music do it with tubes or EQ or tone controls it's much cheaper. |
Value for money is a minefield. Perhaps you can price out the components that go into a unit, but then you have to factor in all the other costs, past, present, and future that the manufacturer has to account for. I've never seen that done convincingly, because buyers forget items or underestimate costs. Once you've got over that hurdle, a unit that genuinely costs more to produce and market may not sound as good, at least to some (or many) people, as a unit costing less. So there's no ultimate correlation between performance (sound) and MRP, however nice it would be if there were one. So you pays your money and takes your choice. |
@jjss49 I appreciate your remarks, and I'm interested in anything we can point to that would make up that 10% difference. If possible, I'd like to go beyond "parts cost." What are those parts? What space is there in the tech assessment for creativity, or some kind of special "insight" into what makes something work, a little better... Also, you make a 'aside' comment about cost of ownership. I looked on us-audio daught com and did not see a single Denafrips product for sale. On both the preceding website and e-bay, I did see numerous PS Audio products for sale, including the mentioned DAC and others. PS Audio (itself) appears to be selling the Direct Stream for about $5400 through us-audio. I also see a number of items that are sold used and also for significant reductions from the initial price, if $5400 is the original cost.
Altogether, I'm not seeing a strong argument for a more expensive 'cost of ownership' in the Denafrips, although this might show up in one of their more costly products. My interest would not extend beyond the Ares ii, which looks to cost roughly $750 USD. I do not know the original cost of the units I've identified, but it appears that you lose more than the (entire) cost of the Ares ii in a resale situation with a PS Audio Direct Stream. So, is that 5-10% improvement worth the expense? And that, of course, is an individually measured conclusion. Perhaps there are other monetary considerations in the contrast, jjss49. You did point to upgradeability, which makes the $2300 option above more attractive. You did point to a broad group of bells and whistles, certainly not present in the Ares, although we don't expect a $750 unit to do it all. Interestingly, Topping DACs often see have to have quite a number of bells and whistles. Also, getting back to the Bifrost 2, we see another unit that is upgradeable at the sub $1000 price domain. It has few bells, but does include a remote. @djones51 mentions transparency. What does that term cover, in terms of the experience of a DAC? Does transparency mean the DAC will read all the musical information and present it all coherently, to the amp? Schiit recently presented their MODIUS DAC, for $199, and it has the lowest distortion reading of any of their DACs. What does this mean, compared to the higher end offerings, the Bifrost, the Yggdrasil, etc. I've mostly seen raves of the Yggdrasil, so what is the specific tech that people are pointing to...? If it measures more distortion than the Modius, what is making it a better sound DAC, despite distortion readings...? |
Just get an RME ADI-2, Topping D90, Benchmark DAC3, and forget it. DACs are to the point of transparency, they can be made to have sound signatures using the nonsense mentioned above but in the real world a DAC converts digital to analog without adding or taking it should be neutral. If you wish to add distortion use tubes. A $99 Schiit Modius would be indistinguishable from a $60,000 MSB to pretty much anyone since amplifiers and speakers have more distortion and noise than even inexpensive well engineered DACs. |
I own both the DirectStream and the Ares ll and find the PS significantly better, though the Denafrips is an amazing bargain...that last 10% often costs a lot...on the other hand, I could probably sell the PS and take less of a loss than on the Ares, so actual cost of ownership would be less...before PS started selling direct, their actual prices were way less than list... |
@listening99 denafrips is one of several companies that make superb sounding dacs at reasonable prices - as you mention, their ares 2 entry level model priced at a small fraction of top tier dacs in the 5 grand and up range - dena is a chinese firm, selling consumer direct, bypassing the dealer network and its 80-100% margin, so there is that value conveyed to the end user for sure that being said, as you mention as well, the ps audio DS is programmable, can be updated via software downloads, can have a streamer/dac appended via an internal board, so there is future proofing and great flexibility that denafrips does not provide - furthermore you can only buy the denafrips units from a retailer in singapore (seriously!), if there is a problem with the unit you need to scramble for help... so there is value in other elements than pure SQ now, also, note the denafrips makes the terminator, a 4-5 grand dac, and now they are also introducing a terminator plus, a 7-8 grand dac, all based on the same basic architecture so within just one maker’s line you have choice... is the term and term plus 4-5-6-7-8 times better sounding than the ares 2? no way... but there IS a difference in SQ no doubt... however subtle it may be the notion of diminishing returns in SQ from spending $ in audio reproduction has been around as long as the industry... savvy users learn the shape of the curve in each part of the chain, and each of us pick our point on the curve based on desire for performance and size of wallet |
Amazing! I jumped from here into a search for the Denafrips Ares ii and found the following statement in a review on Amazon: "I did a direct A/B comparison between the Ares II and a PS Audio DirectStream DAC. The DirectStream as I had it configured costs $6,899. Granted the DirectStream has more features. However, when comparing sound quality, I would say the the Ares II was almost as good as the DirectStream. Maybe 90-95% of the DirectStream. Without me going back and forth I would not have been able to tell any difference - they're that close (listening on KEF LS50 speakers). The PS Audio DirectStream seemed to have a tiny bit more detail." What does this imply about parts? Marketing? The market bearing... |
So, I took a peak at the innards of two DACs, one of which was referred to, above. I looked into the PS Audio directstream DAC, which costs $6000, and then the Denafrips Ares ii is about $1000.00. This is where a trained eye is really needed, because I can only say the parts count and appearance look somewhat similar. This does bring to mind some questions... The assertion that DACs are priced at what the market will bear needs further discussion. I don't think a manufacturer simply ponders what people might willing to pay for the piece, setting the price at that level. There is the question of time invested (research, parts acquisition, assembly, etc...), parts used, and equations that compare the product to other products on the market, and marketing costs. Perhaps this is what is meant, or what is hidden in the notion of "bearing." Marketing itself can be a huge piece of the cost of an item, amounting to as much as 50% of product cost, from what I have heard. This is where word-of-mouth marketing becomes an interesting facet of the cost, perhaps revealing why so many people are responding to products from Schiit and others, who don't appear to be going to great lengths to make their products look flashy and unique, nor do they do much advertising compared to, say, Klipsch. Also, we all know that aesthetics or claiming a particular "expensive part" may be less for performance and more for enticement/marketing purposes. The latter statement calls for scrutiny, which is to say: I'm impressed when someone can even list things like:
I do understand there is a role for power conditioning and power management in these devices. In my recent study of an unusual offering from an Indian company called ALLO, I noticed that their Revolution DAC, which comes in around $300, emphasized short signal path and the DAC portion of the unit was very small - very small, but a large part of the unit was reserved for power conditioning; or, at least that's what I think I saw. Maybe someone can look it up and tell me what they see, as I'm sure a more thoughtful breakdown of parts would be of great use to many fairly ordinary folk, who enjoy learning about these things. In a hobby where (some) people seem to be forever boasting simplicity, short signal paths, and the like, I guess I'm needing a little more information about the important features of a quality DAC. I mean, I was attracted to the phrase, "amorphous core chokes" and "Mundorf 4 pole caps" and I find that there is always some kind of rhetorical element to the presentation of these devices, but what truly counts??? Maybe I need to start a new thread: what are the important features of a DAC that operates transparently, only sending on the "music" and other recorded "environmental factors" from the recorded digital signal... |
Djones51 and dromme, While I support your right to your opinion, I think it is not based in facts beyond your experience. I agree you can get a very good baseline with less expensive DAC’s or for that matter, most other mature technology products. My cheap personal laptop today is under a few hundred bucks and operates better than ones previously costing many thousands. But, better computers exist at significantly higher dollars. There is a significant increase in value and costs in chasing the incremental gains. These gains may not be important to you- that is the beauty of capitalism- you get a choice. But for those with the means, the supporting technology to take advantage of the incremental gains, and the desire, is it wrong for someone to supply a solution for that need, even if it is beyond the reach of most? I like that segmentation. I like that ability to choose. It gives me hope that someone will produce a product for the few. In this case it is a piece of audio equipment- but it could easily be something much more critical. |
So in your tidy, small audio world a robust power supply made with amorphous core chokes, Mundorf 4 pole caps, high performance diodes, resistors and the like will not set the stage for much better sound? In addition, a dac’s power supply made with a half palm full of $.25 cent throw away parts is all that is required for equally great sound in all dacs. I know it may be nice for you to shrink down the world of possibilities to something your mind can be comfortable with, but is this really true for the rest of us or at all? This is strangely akin to audio communism. In one blanket statement you have made it clear that only your perception and audio world view have merit and the rest of us are weak in need of your special authority. Why do you spend anytime here? Really? This is a site for audio enthusiasts with a passion for what is possible and the ability to enjoy these possibilities. You deny the possibilities and darken the spirit of this site. Is it time for you to move on? |
I am lucky to own the best deal on quality/price for dac....Paid 24 dollars new, with a used value around a little more than 100 dollars... No coming back..... My dac shows no limitations and in the beginning i had the impressions that my dac has limitations, for example lack of details...(Starting Point Systems NOS dac) What an error i was making ! My audio system was not the culprit of my unsatisfaction at all, his triple embeddings was faulty simply... Most people evaluate dac or gear on a wrongly embedded system and most of the defects they attribute to the gear most of the times comes from the electrical, mechanical and from the acoustical powerful embedding... Thats life, who says that it will be simple? The best quality of a dac consist in his total non-existence to the ears....This is my experience with S.P. S. dac. If you say no, it is retrieving details, i know immediately, especially if your system is rightfully embedded, that your dac is not a good one never mind the price.... :) |
And in my experience, when a designer uses high quality parts like these, that means they’ve got a product where they really care about the sound and have carefully manicured it’s performance. I bought my audio Mirror dac because of this reason and have not been disappointed. I’m totally satisfied, but would also love to hear the mojo dac above because the design decisions you can see from the internal shot are things I’ve found to really matter in my own component builds (independent power supplies, solid core silver wire, electrical isolation, quality choke-based smoothing, etc.). |
I was going to get on and say exactly what Bill did.. @grannyring . Here's a link to the dac I suspect he was talking about. https://cdn11.bigcommerce.com/s-210bb/images/stencil/2048x2048/products/156/1340/Mystique_EVO_Inside... Good luck getting those parts for $200. |
Some simple rules around development, manufacturing, and marketing:
|
I have been thinking about the same thing. You can easily buy a streamer with a built in DAC for less than the cost of a DAC. But forgetting that, what seems odd is that a stand alone clock for the DAC often cost as much as the DAC with its built in clock, or streamer/DAC with its built in clock. Reading between the lines, a number of clock purchasers' comments allude to a "incremental" improvement, and others don't sound quite sure there was any improvement. Just my observation from reading here, no practical experience so I am open to being corrected. |
Come on guys some of this is parts cost and quality also. A quality and purpose built chassis that reduces unwanted vibrations costs and takes engineering. Some use $250-$300 chokes from Lundahl and use 5 of them! Some use $15 resistors and $150 caps in key positions. Some use very high quality circuit boards. Some use high end trannys that can be very expensive. Some use Opamps at $35 a pop. Some use the best wire at $4 - $10 foot. Some are hand made one at a time taking up to 5 days to complete. Just the power supply in a well made high end dac will have parts cost 100x the Topping dac. Now we can talk about the use of high quality input and output jacks, IEC and such. I could go on and on, but you get the point. |
I agree there is a bunch of hoop-la. There is some differences in sampling rates and such with Mac gen 2 dacs. It had something to do with SACD sample rates, and the DACs ability to use ALL of it. Macs second gen Dac addresses that along with their, $$$$$$$$$$ Transports. Someone will clear it up.. To rich for my blood. I'll stick with my (ES) Sonys, thank you very much. I love the bang for the buck and the house sound of the TWO, Sony and Mac..Gen 1 Dacs, both fine by me.. Regards |
Funny, I was looking at a system I use. I use a 5 dollar, flee market Galaxy SIII phone for the source and the DAC. I go in and listen to, the Mac C2500 or a Krell I use in the basement. Is there a difference? Man oh man. HELL NO!!, Just kidding, big time difference. The Krell skinned the pants off the Mac until I did some work. Tube roll or two, and an op Amp swap. Krell is very clinical. Mac is..... Mac... Just so you know none of them come close to my C20 in the analog world. Good yes, great, NO! That C20 is killer..Samra Touch... Regards |
These types of questions always puzzle me. The capitalism quote is right on. Many have found utter pleasure listening to a myriad of products that punch way above their price points. For some it may be “snob appeal”, for others they may actually hear something others do not. When it comes to certain hobbies like watches, cars, art, wine etc. seldom should price be an influencing factor. There is greatness at every level you only need to decide at what level you want to participate. In reading reviews of any product you can always find those who have in their mind found “better” (subjective), out-performing the Reference Class for much less. |
Dac's like anything else are built to a price point. They can be as simple as the DAC in your phone. But no one will argue that their phone DAC is anywhere near as good sounding as a discrete dedicated DAC. The Bifrost2 uses Schiit's version of a R2R ladder configuration that is more costly to implement well compared to a cheaper design. It has it's own power supply etc. The BF2 should be miles ahead of what the Cambridge can do. Makes sense, you are paying for the R&D and tech that Cambridge decided not to spend. |
