What is the working principle of the Loudspeaker?


    An audio signal source such as a microphone or recording produces an electrical "image" of the sound. That is, it produces an electrical signal that has the same frequency and harmonic content, and a size that reflects the relative intensity of the sound as it changes. The job of the amplifier is to take that electrical image and make it larger -- large enough in power to drive the coils of a loudspeaker. Having a "high fidelity" amplifier means that you make it larger without changing any of its properties. Any changes would be perceived as distortions of the sound since the human ear is amazingly sensitive to such changes. Once the amplifier has made the electrical image large enough, it applies it to the voice coils of the loudspeaker, making them vibrate with a pattern that follows the variations of the original signal. The voice coil is attached to and drives the cone of the loudspeaker, which in turn drives the air. This action on the air produces sound that more-or-less reproduces the sound pressure variations of the original signal.
ztzaudio
Dear @simao  : The OP joined Agon in March-28-19 . His game only knows him.

R.
Good catch by Simao.

If ".com" is appended to the OP's screen-name the resulting URL is that of a speaker driver manufacturer in China.  Perhaps the OP is seeking to subtly publicize his company, or to elevate its ranking in search engine results.

Regards,
-- Al 
Hi agoners,  Some things to add.  Microphones and drivers are electromechanical devices.  As far as room sounds in recordings, they are important and are manipulated for the sound the engineer is trying to achieve.  You would be very impressed to see all the tricks engineers have to manipulate audio.  Cheers
The OP plagiarized:
http://hyperphysics.phy-astr.gsu.edu/hbase/Audio/spk.html
And I've seen this post before, although it has since been removed. I'm not sure what the OP's game is.


The OP made a statement. He didn't pose a question except in the title. Seems like everyone gave good answers though. 
Dear @ztzaudio : "  They are all transducers..."""

@millercarbon is just rigth. Speakers are like phono cartridges: both are transducers.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
The OP's title question is answered by millercarbon and mijostyn, and blindjim is not wrong either.

I would add:
Different speaker designs exist because their designers saw different goals, and had different budgets and timelines, educations and hearing abilities.
It is easy to be impressed with the technical details in a design and the dedication of its designer. Of course, this does not validate the science behind the design. Those with the requisite education know quite well the simple math ignored in so many designs, math also not known by reviewers or editors. Those designs turn out to be ones difficult to set up, and those that cannot play certain types of music.

To keep research grounded in reality, one must state the desired goal and then always ask the right questions (and many wrong questions and figuring that out!).
When designing a new speaker, we can agree the main goal is to get that complex waveform seen on a computer to be how our eardrums move in and out. Of course, that motion will be overlaid (not obscured) with room reflections and echoes, so we pull our speakers out and make our rooms 'not lively'

To reach this goal, a good designer must describe his average listener--
  • How far away?
  • Across what range of angles?
  • In what size of room?
  • Can the speakers be pulled out and positioned?
  • What music is played, and how loud (soft)?
  • How much power in the amp?
  • How conventional must be the speaker's cabinet?
  • Budget
Then it's off to the races! The good designer would then determine which types of designs best achieve that one goal above, for that average listener. The good designer would also learn the limitations of each design, since no designs are perfect.
Of course, consumers must rely on listening, which means also training their ears to listen for details important to the music. Go to live, intimate musical events of top-notch performers. Go often as possible to help train your ears. While we all have different abilities to hear into the music, we all benefit from conscious efforts to actively listen.

Best regards,
Roy
Green Mountain Audio
 
They are all transducers, devices that translate one form of energy into another. The operating principle is transduction.



Dynamic loudspeakers are just linear motors sized and shaped to produce certain frequencies.
Planar magnetics have the voice coil in the diaphragm.
Ribbon speakers, the ribbon itself is the voice coil.
Electrostatic speakers have no voice coil or magnets. A charged diaphragm is driven between two high voltage grids.
Then there were Hill Plasmatronics........

seems to me you have your answer already, almost.

the ‘identical’ thingy bothers me some. Mics aren’t perfect and neither is or are the components engaged in reproducing its mimickry. naturally then there will be some loss or distortion during and or thereafter with respect to signal integrity.

speakers themselves contribute wildly to the loss and distortion as does the microphone itself and its preamp, cable, etc.

even the acoustics of the room in which the recording or playback is delivered will boost or detract from the noise they exhibit.

so, IMO the working principle of loudspeakers is to take the electrical signals received and excite the transducers in such a way as they vibrate themselves and the air surrounding them so varying frequencies are transmitted in an audibly discernable manner that sound is heard.

albeit, from instrument to speaker is a long and twisty road. things will not ever be identical or exactly duplicated at our ears relative to the orig performing venue.

true too even if a mic is not in use and all signals are transmitted electronically.

as for all these losses and distortions, here is where the ‘brain’ comes into play. it takes up the slack and tells us if a thing comes close to the orig that it likely is being , it being ‘replicated’ .

this advisement the brain sends us reminds us of two things. we’re hearing a recording… and how well done it may or may not have been recorded and rendered.

it also advises us we need to spend a lot more money so we can believe we are either at the orig venue or the artists are in our room.