Vintage receivers???
Thanks
Post removed |
Mapleshade Scott lk48, using one for second system. I think it plays as good or better than a lot of $3000 integrated amps, very musicalI run this amp more than main system. 6 ohm 86 db speakers in a 800 square foot room,sounds big and detailed. Turn it on 9am till 1 or 2 in the morning on weekends and 5pm till midnight on week days for last 3 years on same tubes, never a problem. There something very special about el84 tubes |
I guess I was wrong about the Marantz 240 if 'Kosst "is correct. I suppose that my reliance on units that still function and my inability to do my own repairs, has made me a cheerleader to those that want to or do. I wish I had a repairman (no bench in my apartment) Or someway be able to do it myself someday. |
Post removed |
Post removed |
Well John the Marantz 240 should make a fine amp for you to to recap and refurbish. If the work is only a matter of caps. The bigger problems are the integrated circuit boards. If they are bad you will be out of luck. Remember that older amps frequently had less power than you would anticipate seeing now. |
Post removed |
I have vintage Sansui QRX-5500 and Marantz 2252B that I went through, cleaned all the switches, pots, etc. and restored slightly. They both work and sound great, but I can tell you that the Sausui actually sounds slightly better than the Marantz. Also, I love the older vintage gear with the wood grain panels, just like the Pioneer Elite units with the wood surround. The Snasui QRX-5500 is the monster surround 4-channel (Probably quad) unit. I really like the look and sound of it. I only use it in the 2-channel mode, but it is nice. a few years ago I purchased a mint Pioneer receiver (with wood panels) for my daughter along with a mint Pioneer turntable that I placed a new cartridge on for her. She and other younger people are now getting seriously into vinyl. The Pioneer receiver was in mint condition (seriously). Inside it looked brand spanking new. I found out that It was stored by the previous owner's father that passed away. They are out there is you look, and most are not expensive. E-bay is a good place to look. If it isn't Marantz or McIntosh, the price is typically reasonable. Also, as I said, the ones with wood casings are beautiful. enjoy |
shadowcat2016, I can't really defend the SQ of XM radio. I only listen to it in the car. I am hard pressed to find enough time at home to sit and listen to my CDs, cassettes and vinyl, let alone the radio. As always, my comments are probably unique to me, but I did leave FM radio (in favor of XM) behind back in 2005, and I've never looked back. I'm not even sure what it costs anymore (I pay annually, but whatever it is, it's well worth it to me! Just for the nostalgia of it, I would be interested in a McIntosh MR78 or a Marantz 10B, if I could find one at a reasonable price. |
Post removed |
Somebody has to do it. I went through a phase of trying to buy better Japanese 70's gear a number of years back and found nothing but trouble. I had a Kenwoood KA-7100, a 60 watt integrated amp, in my late teens which survived into my 40s. Went I went to replace it from units I found on Ebay they were all a mess, some misrepresented as working , some not broken at first necessarily but broke shortly thereafter and deemed un repairable. I then got the bright idea of buying the TOTL Luxman receivers which I coveted for years and even when old not cheap, half working, orreally basket cases that were also simply not repairable, for a reasonable price anyway.It sounds Like you are interested in restoring/refurbishing the piece you get. I never had a reliable repair person, and burnt boards and such are really ridiculously difficult to find in some cases. However I have had good luck with older units, from the tube era, and have found good success with Fisher and Sherwood.I have had some successes with a solid state Marantz amp 250 M IIRC (just barely younger than the tube units). I ham handedly made it play a very low ohm load and it caught fire. My BAD! I also really loved a very early Accuphase pre amp. Even that dropped a channel but I traded it for other gear to a guy who could fix it. |
I did a complete overhaul of a Marantz 2270 that I bought a few years ago with a kit that had all the instructions and parts. I also bought new high quality filter caps for the power supply. It’s really not that hard to do over several evenings and, with a multimeter, one can easily bias the new output amps, and adjust the phono section, tuner and other parts of the circuitry just fine. The hardest part was installing the new vellum, led lights for the dial, and replace and adjust the string for the tuner pointer. The end result is wonderful and the sound quality is superb. Doing the project allowed me to appreciate the high level of workmanship and design that went into these components. They don't build them like this anymore. The quality of Marantz was tops in the 70s and it is easy to see why they charged a premium for their receivers relative to Pioneer, Sansui, Kenwood and others. |
tonykay Read a few reviews on XM radio today.............almost every one said, good programming, terrible SQ.............If that's the case it doesn't seem like something I'd want to pay a subscription fee for . In all fairness, the reviews I found were at least two years old, so perhaps things are better. Seems that in the push to provide a high number of channels and appeal to the largest subscriber base, they've compressed the audio and quality sucks..............Just regurgitating what I read, no personal experience with it.............Being able to listen to my flavor of the day would be great, but if the sound is as bad as people claim.........well, my system is pretty decent. I can easily hear differences in CD recording quality, so bad radio would likely be a no-go for me...............thanks though :) |
Post removed |
Here is a link to a guy in my area, I don't know him, but I know of him and has a reputation of doing excellent work. He completely rebuilds vintage gear and offers them for sale when completed. I have contacted him and he is going to rebuild my Marantz 1060 this fall. Also, check out his sold listings. https://www.ebay.com/sch/leroy3054/m.html?ssPageName=STRK%3AMEFSXS%3AMESOI&_trksid=p2053788.m154...%C2%A0 |
I really like my Marantz 2252B, works and sounds great. My biggest gripe is the speaker cable connection to the rear of the classic receivers, back in the day when we only used zip cord that was fine but times and technology have changed. I hate the thought of shipping it to someone to convert the speaker cable hook up to five-way binding posts. |
kosst amogan Agree on the prices.........many of the better vintage receivers sell for as much or MORE now than they did new. I guess what was good, still is, and people will pay for it...............I don't mind that part, but I'd hate to drop good $$$ on a 30-40-50 year old unit and have to dump a bunch more into repairs and rehab.................Might be less aggravation and less expensive to go with something more recent :( I'll keep looking, might find a prize!! |
I have very fond memories of the mid70’s Sony STR 6065. Big, beefy, yet amazingly refined sound. Astounding build quality—thick veneer over the chassis with a thick metal front panel. Beautifully damped witches and knobs, great little headphone output. A very conservative 65 WPC/8ohms. The only weak area the volume pot. Prone to collecting dirt and eventually crapping out. They're around... |
Post removed |
Yeah, I agree, the best of the tuners, back in the day were hard to beat. I had a very nice Sansuii 5000X receiver if I remember right, that I too sold for separates. I went with a Sansuii BA-F1 amp.........that's in mothballs now and I see selling for around a grand on ebay sometimes, $600 new at the time. Picked up a Crown SL-1 preamp that I later sold for a Bryston .5B...........Still use the .5B as a phone preamp. I love the look and feel of some of that vintage gear..........Digital stuff often has more bells and whistles, but I'm not much of a bells and whistle guy. A good two channel system has always been just fine for me. |