Vacuum Tubes - Chinese knock offs being sold as NOS?


Hello Audiogon,

So I was searching the ePay website for vacuum tube.  I came across 7 ... YES 7  adds for Mullard 12AT7 NOS CV4024 ECC81 M8162 - UK Military NEW UNOPENED GUARANTEED.

Evidence of foul play:

-  There are vendors all over the world (USA, Taiwan, Great Britain)

- The pictures listed in the all of the adds looks to be from the same source and are all white boxes (military style).

- The date codes on many of the tubes in the picture are the same 83-14.

- The picture of the big box the individual tube boxes come in looks to be the same picture in all of the adds, not to mention the cardboard of the outer box looks brand new.

- For the tubes shown removed from the box most are shown wrapped in thin packaging paper.  Strange that this paper is not yellowed at all as it would for 40+ year old tubes

- These tubes are RARE and expensive when for sale.  Funny to see no less than 7 adds for full boxes of "military tubes" at the same time.  To find a box full of 100s of these tubes would be the find of the century, and I am supposed to believe that 7 such boxes where found at places all over the world?

- I think the military style boxes were selected for the counterfeit as they are easier to fake than original factory boxes.

I have contacted a few sellers (not to buy but to ask why they are lying in their adds), I do not expect to hear back.

I initially was duped (did not purchase, but saved the initial add to my watch list until I saw the other adds pop up so frequently).  Hoping this helps spread awareness of this scam.

Thanks,

Dave

 

drawding

Mullard 60’s Blackburn phase splitter in my extensively modified MC240… from Brent, totally transformed amp from the admittedly tired (72%) Tele.

Have fun !

++++ for Brent, he is hyper trustworthy. I also use Andy at Vintage tube.

I always buy tubes from Brent Jessee - his recommendations have alway been spot on so far, and while he isn't the cheapest, I can trust him.... 

There are still good deals out there... even on the big site, though you are correct, they are getting harder to come by.

You are correct about the Amperex/Holland IBM stuff on Brent's site.  Still some good deals there.  Might try a couple.

I got answers from most of the vendors I contacted about the Mullard military tubes... none of their answers gave me much confidence.   Too many red flags for me, some listings for those tubes seem legit, but most do not.

Caveat emptor

I understand your take/position, but if you only need a single you can purchase a properly tested Amperex/Holland one from Brent Jesse for $60, or so.

Purchased gobs of good tubes on Ebay 20 years ago (as well as loaded tube caddies locally) for close to ZIPPO, but those days are gone and past.

 

DeKay

DeKay,

Thanks for your detailed and thoughtful response.  I have several vintage USA types (GE, RCA, Tung Sol).  

The immediate purpose of these tubes would be in the phase splitter of a mono power amp, so perhaps not as critical position as say in a pre-amp.

I was thinking it might be interesting to try a Euro made version.  Mullard is a respected brand of GB tubes, so when I saw the first add for them, NOS military, that seemed like a good option for a good price.  I thought someone might have come across a box of them that typically does not sell tubes and was selling them at reasonable prices to move them.  When I saw 7 similar adds of different sellers from all over the world ... well you know the rest of the story. 

Plus some of the pictures that are not identical across all adds, the lettering on the tube seems to be chalky (typical of NOS tubes) and bright and solid on others.

I think I will try a Euro tube, not sure I will try the Mullard ones discussed in this thread or not.

Since I do have a tube test system that can fully test all tube parameters, I tend to shy away from "pro" dealers as I can do the matching and weeding out myself.

Thanks again for your thoughts.

Dave

Dave:

What amp/preamp will you be using them in and what type of sound are you looking for?

If you are using the amp now - what tubes are in it?

I've mainly only used them to drive power tubes if HiFi amps and also to drive Fender reverb units, so won't have rec's for other spplications.

In my older Bottlehead power amps I swap the 12at7 (driver) depending upon what 2A3 power tubes I'm running (have 2 types of RCA, Visseaux and Ken- dual flat plates which all sound different from one another).

Spent an afternoon (long time ago) rolling power/driver/input tubes (EL84/EL34/12ax7/12at7) in a couple of Jolida amps and the same was true.

I also use 6201 variants of the 12at7, but don't know what the difference is - if any.

My go to for the extremely fat sounding Ken-Rad 2A3's are RFT's (a tube most people don't care for in;-).

For the much/much lighter sounding Visseaux I use RCA black plates with an odd wiggly shape @ the top of the plates.

For the gray and black plate RCA 2A3's I usually use RCA black or gray plates, but some have a squared off shape @ the top of the plates (think all are from the late 50's/early 60's as I as I started using them around 1963 in Fender amps).

I've also used Amperex/Holland 60's production in place of the RCA's, but my tube storage cabinet is currently blocked by stuff I'm not up to moving - so can't check the details on them.

Have various Telefunken/Mullard/Siemens/GE/Sylvania et cetera on hand, but they were not my favorites and ended up being stored away.

 

DeKay

"Strange that this paper is not yellowed at all as it would for 40+ year old tubes"

I have some 50's  tubes with original packing paper that is still pliable and appear relatively untouched. 80's tube are practically newborn!

It  depends where they were stored.

 

Thanks for the feedback everyone and also the history lesson.   My take away is that they are legit NOS tubes from the mid 80's, but not necessarily the end all in sound quality.

Can anyone offer any comparisons between them and current manufacture Russian and Chinese tubes?

Thanks,

Dave

Petgo is most likely spot on.

The market was flooded with these starting around 2002/2003 with pics of huge master cases (both in individual white boxes and boxless).

I purchased 2 pairs from the UK (white boxes -w- black print/tubes wrapped in thin paper/black plastic wafer shaped pin protectors on the bottom).

Sound was awfully thin/bright driving 2A3's in my Bottlehead amps, but some liked them in different applications.

I gave them to others to try, but think that one pair was returned.

Mine were dated 1983 or 1984 (forget which) and the etched code was for the Mitchum (sp?) plant.

 

DeKay

There are a number of quality vacuum tube retailers. The price savings from unknown sources is just not worth the few dollars saved.  

They are most probably real ones, this tube was made in abundance in early 80's, for military or air force, came in white boxes, with cigar wrapping, so dates 83-14 are not funny, it came under all names CV4024, M8612, 12AT7WA and so on. Vendors are all over the place and master packs are in hundred.

Best way to check if fake only looking the construction.

They may also be rebranded but that does not subtract for being the real thing.

One thing that cannot be rebranded is etched codes at bottom of glass.

Post removed