Thoughts on DAC option


Current DAC is the original Auralic Vega . This was a HUGE upgrade in sound quality from a Cambridge Audio DAC Magic.

And things are good right now. Well, mostly, it's not like we are generally blessed with freedom from the desire to upgrade!

And now I have an option of a Chord 2qute. My main issue with the current setup is the fatigue on some music. EDM is generally fantastic, however rock is often harsh. Voices are great.

So the question is whether the Chord could smooth off the sharper edges of things.

All feedback gratefully received.

System is:

Sources - PC and Auralic Aries Mini

Amp - Prima Luna Frank Hybrid Integrated

Speakers - Krix Harmonix 2

Interconnects and speaker cables are average but not the biggest factor here from what I can tell.

incoming

I ran Auralic Vega some years ago, this not your issue, Vega exposing some other weakness in system.

Your DAC seems solid, I would not change it to try and solve this problem. Do you notice a difference when streaming from the PC vs. the Mini? In both cases, what type of connection are you using to connect to the DAC?

Speaker performance and interaction with room acoustics have by far the biggest impact on sound quality. You might want to consider getting a measurement microphone and putting the REW program on a laptop. Then run a frequency sweep and review the results. You may be surprised as to how uneven the response is. That can be addressed with acoustic room treatments, adjusting speaker placement, and/or adding room correction.  I added room correction to my system and got an improvement in SQ that was well beyond any equipment change I've made. 

There have been many good suggestions so far. In addition, I would experiment with the filter options on the Vega. When I owned one years ago, they definitely could impact the sound. This will not make huge changes, but it's free.

You might benefit from a EQ in the system to take down the top end of the Krix by 2-5 dB when you are playing rock. In looking at the graphs in Australian hi-fi, the response, though smoother and flatter than most, does rise by a few dB between 1 kHz and 10 kHz. This definitely could manifest as sounding "harsh" on many current recordings. 

 

If I were you, and, because your speakers and components seem quite satisfactory, I'd start with doing some experimenting with your cabling.  Cables can make or break any quality audio system.  Happy listening.