Hi Guys, I have been adviced several times to get a tube preamp to mix it with my solid state amp. I would like to hear opinions about this combination and if it really change the sound for the better. I don't want to spend my money without to be sure there will be an improve. I mean between the same level. Thanks, Jorge.
I have used both and I really think it depends on the individual units rather than just Tube vs SS. Just adding a tube is no guarantee of better sound, you have to add the right tube for your system. Tube pre amps do not all sound alike; neither do all SS ones. Pick a pre you like whether it is tube or SS.
Elizabeth makes good points. I had tube pre's for 20 years. Last year I went SS. Different? Yes. Better/ worse? Yes. There are things I loved about tubes,and things I feel the SS is better at. If you buy a quality piece of either you should be happy either way. Try to get one of each into YOUR system and see what YOU prefer...
Good advice above. I agree with all but Polk432. Yes, a tube amp could make more of a difference, but no knowing the rest of the gear, etc., it's possible that a tube amp could make more of a difference in worse sound.
It sure can go either way(good or bad). If you really want to try one, see if you could find a loaner. If not, see what models your considering can be bought and sold without to much of a loss dollar wise.
Not all tube amps make the grade. Placing a tube amp into your systems doesn't constitute the holy grail. I say depending on your gear and room acoustics it could swing either way.
So, all the high end dealers and advisors who are giving me suggestion aren't telling the true. They give me a solid answer that tubes will improve SS at the same level. I mean apple to apple. The speakers I have for the hybrid system are B&W DM 602 S2, cd player is a Cambridge Audio, and the power amp is a B&K reference. I am not taliking about an ultra high end system because I can not afford it. It is an entry level system but I want to be close to a high end sound. Jorge.
Dvjorge, I myself not a dealer, cannot say what you will like. Everyone who posted here most likely has a completely different system and taste for their equipment. If I mix tube and SS, I mostly prefer SS preamp, and tube power amps. I have on occasion done the opposite over the years also. I can say that in general a lower priced tube preamp may have rolled off highs, and be less transparent. I imagine there are new ones out there for less money nowadays that may not fit this description. There are a lot of people on this forum that love the tube preamp, and solid state power amp combination. All said, we can't say you'll like a certain food, or type of car either. Elizabeth asked you what your looking for sonically, and you haven't even responded to that. I stated it could go either way. I don't think anyone hear is trying to mislead you. In the end, you will be the only one that will know if you like the combination. Adding a tube preamp isn't a guarantee for anything, in any system.
I thanks all you for the answers. I realize I was wrong or bad adviced. It was told to me that tube gears sound better than the SS, and combining them ( SS power /Tube pream ) give the best possible sound for the money. I am looking for better and clear highs (more real)better definition of each instruments and a more melodic sound than the SS I have is delivering. The true is I have listened several Hi End systems using Mark Levinson, Krell, Classe and other high quality SS that don't sound as good as a Cayin tube intregated or Rogue Audio gear. I am not the only one who has noticed that. I don't know where is the secret but some entry level tube gears can match ultra high end SS gears. At least, this is what I have seen lately. Jorge.
It's still hard to say that combo will work. Those amps you heard, if they were "tubed power-amps", I don't think a combo SS/tube would do the same. Maybe a just a little taste of it, but not much.
A tube amp will make more of a difference in better sound.
My experiences after owning 3 ARC tube amps, 1 hybrid Counterpoint, Wolcott and now the CAT, is that the tube preamp brings far more benefit to the decays, ambience and harmonics. The key is to find a preamp that does this. And sadly only a small percentage of tube preamps can nail this. I have dismissed more tube preamps than any other component in the chain because this link is so critical to the 3D performance. And far too many botch this up! No solid state preamp will ever come close to the best performing tube preamps in this regard.
The true is I have listened several Hi End systems using Mark Levinson, Krell, Classe and other high quality SS that don't sound as good as a Cayin tube intregated or Rogue Audio gear. I am not the only one who has noticed that. I don't know where is the secret but some entry level tube gears can match ultra high end SS gears.
My experiences echo this statement for the last 25 years. Krell, Levinson, Classe systems don't come close to nailing the strengths of even a middle priced tube-based system with the "right" components.
Yes, that is what I say. I have been in front of several SS ultra Hi-End systems that cost a lot of $$$$$ which can not reach the sound level of some entry level tube gears. I listened a Rogue audio tube integrated with an Arcam CD player, the speakers were Epos bookshelves with Straight Wire cables, the sound was to die for, and everything was less than $ 3000. Jorge.
Dvjorge, You and I have some similarities here, so fwiw: I too had B&K amps, first a B&K ST140 and later an EX442 Sonata (200 wpc dual mono) and many yrs ago, I too was told that a tube preamp was the way to go. I bought into the idea because it made sense and never looked back. Now, I am completely a tube person.
From time to time I go back to SS gear but never for any amount of time because I really like the warmth and realism that only tubes can bring.
I've also heard megabuck gear from ML, Krell, etc (6 figure systems) and to me much less expensive tube int amps sounded better...
The B&K gear was traditionally always very warm and tubey sounding (I went head to head with my EX442 and a pr of tube monoblocks and almost couldn't tell the difference!) so adding a tube front end onto the B&K stuff is a great combo. I owned a Music Reference RM5mkII for 5 yrs with my B&K ST140/EX442 and surprisingly a lowly Dyna PAS2 sounded much more euphonic when I used it for a short time. I would think a cj preamp would also make a great combo with your B&K amp...
But as Baranyi mentioned above, why not just go to a tube int. amp right now. I think once you get a tube preamp with the B&K, you'll like it so much, you'll eventually wind up getting rid of the B&K for a tube amp or tube integrated...
Just to share my experience. I originally use a Denon receiver, not happy with the sound. Then I follow the recommendation to go with pre-post route. I first try used Adcom and Rotel preamp, it is greatly improved over receiver, but still not satisfied. Then i switch to Audible Illusions L1 tube pre, much much better. I cannot confirm if it is because of the tube, or with the design. After all, the AI is a more expensive unit than Adcom and Rotel. But I am happy with the tube pre + SS power amp combination. And I am not implying tube pre + SS power is better than all tube configuration, it's just I have kids, and the tube power amp is not safe with kids around.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.