Thanks @jea48 those look nice!
Quality outlets for non-audio
I am in a 20 year old home now and some of the outlets are pretty loose with no fix but to replace them. Especially noticeable when vacuuming.
Without resorting to hospital grade units I'd like to know what brands / models others have had good luck with, especially with longevity and reliability. I tend to like Leviton. For these needs I don't need GFCI or wifi.
Best,
E
Without resorting to hospital grade units I'd like to know what brands / models others have had good luck with, especially with longevity and reliability. I tend to like Leviton. For these needs I don't need GFCI or wifi.
Best,
E
18 responses Add your response
I would suggest you buy a few of these as well. Install the main body of the bracket on the duplex receptacle neutral connection side. (See photos left side of bracket) https://www.homedepot.com/p/RACO-1-Gang-Flush-Fit-Wall-Plate-Spacer-3-Pack-999X/304353271 |
+1 to @jea48 comments. In particular, what is important is that the outlets be spec grade (usually so labeled) rather than contractor grade (often unlabeled). Contractor grade are the ones you can buy at Home Depot for 35c each. They don't last. The brand of outlet is secondary to the importance of buying spec-grade ones. I find TR outlets a pain in the a$$, but I suppose they keep small kids and stupid people safer. Once you get the hang of them, they're not so bad. |
The first ones I replaced were the ones behind bookshelves, sofa, bed and other heavy furniture. Glad I did it back then as I'm not up to the heavy moving now (18 years later). We rent but the quality of most landlord repairs is so lacking that I prefer to do it myself if possible. Loose outlets arc (micro-arc) so what you are doing is well worth the effort. DeKay |
jtcf: Thanks, I’ll look @ Moen (both bathrooms could use new fixtures as well). I have a spare/complete Delta unit for the kitchen, plus a spare spout. I don’t recall the P&S specific model numbers, but think they were from the 53XX series. The main problem I was experiencing was with older lamps (1920’s-1940’s). I replaced the sockets, but kept the Art-Deco power cords and plugs (the blades on the plugs are a bit thin). Erik: I use a 50’ extension cord on our vacuum cleaner as regardless of the outlet I tended to pull the plug (problem solved). PS: Didn't realize the Hubbells were so expensive (I paid around $80 for 26 pulls). DeKay |
Post removed |
Leviton was my least favorite when redoing our apartment approx. 18 years ago. I purchased a box of Hubbell 8200 and 8300 outlets (like new pulls) and used some of the 8200's for regular outlets. I also used some Arrow-Hart, Eagle and P&S outlets left over from HiFi experimentation. All the above had a much stronger grip than the Leviton's I tried, plus I was replacing old Levitons that were worn/loose. DeKay |