Help to pick belt driven turntable around $1500


Hello everybody,

I know that there is a similar thread already, but my requirements are different. I am looking for a belt driven turntable.

Right now I own U-Turn Orbit Plus with DL-110 on it. Now I finally decided to do an upgrade (the clicking noises coming from the motor solidified my decision).

Here are are my requirements:
- belt driven
- manual (auto is ok, but I prefer to do things manually)
- swappable cartridge
- unipivot is preferable, but not required
- swappable tonearm (not a hard requirement)
- price around $1500
- no cartridge is OK (I like my DL-110)
- support for MC cartridge
- adjustable VTF, Azimuth and Antiskate (azimuth is not a hard requirement)

So far I am looking at these tables:

Marantz TT-15S1
Mobile Fidelity StudioDeck+
Rega Planar 6
Clear Audio Concept (a bit of a stretch even if I got it with no cartridge)
Schiit Sol (much cheaper than above tables, but quite interesting)

What is your experience with above tables and what would you recommend. Any other tables that you can recommend?

Many Thanks,
Alex
adrobitko
“Tonearm unipivot design ? ? ! ! it's the worst tonearm bearing design to mount any cartridge due to its severe unstability. Unipivot is out of question on analog when you are looking for at least decent quality level performances.”

Certainly a pain to set up but not as black as you paint them. I get pretty decent results from a Schröder Reference and the Naim Aro wasn’t bad either. Both ride warps without a wobble. I’d take either of those over an SME of any sort but they do need some patience and there’s quite a learning curve. For the budget or even near it, it may be safer to stick with gimballed with the possible exception of a Well Tempered Simplex, a deck that is capable of very fine results when set up right but would probably give Mr Ruegas paroxysms. I’m not sure you can swap out the arm.
Dear @adrobitko : Your requirements are " bizarre " for say the least:

belt drive for 1.5k price ? ? ! !  there is no single BD TT  even at 4K that can outperforms the today Technics  DD:

https://www.technics.com/us/products/premium-class/direct-drive-turntable-system-sl-1500c.html

Tonearm unipivot design ? ? ! !  it's the worst tonearm bearing design to mount any cartridge due to its severe unstability. Unipivot is out of question on analog when you are looking for at least decent quality level performances.


"  azimuth is not a hard requirement . ""

are you kidding me? a joke? because azimuth is a must to have.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.


Hi,
Funk Firm Liitle super deck (extremely capable)-stretching your budget a bit but worth it.
All other mentioned above are fine also with a slight preference to RP6 because of its arm.

I would find a nice SOTA Sapphire and put a Jelco on it

Clearaudio is super fine
adrobitko, Don't make me take my belt off!!          You're about to get your behind tanned!!! HA
I see exactly zero reason not to spend $1500 on a belt drive and my hands down choice would be the Clearaudio Concept. With the Concept arm and no cartridge it can be had for $1600.

That said the SL1500C and SL1200GR are both excellent choices and I would take either of them over any of the others in your list.
I will repeat myself, but for $1500 you can buy  brand new DIRECT DRIVE Technics SL1500c with cartridge and built-in MM phono stage!

For $1700 you can buy better SL1200GR (silver or black).

Do not spent $1500 on belt drive.