Furutech AC Receptacles


Do the Furutech GTX-D R/G AC receptacles require installation with Furutech wall plates and covers?
wylmars
@pbnaudio, have you ever installed a new cryoed outlet or the Furutech GTX-D (Rhodium) outlet?

Your system and room looks beautiful and I'll bet it sounds great!
What outlets do you use?

There are many that have and have documented (here on Audiogon) the changes that occur during the long break-in period.

Imaginary? I don’t think so.
If you've never experience burn-in on audiophile gear @berberus79 then I'm not sure what to say. Audio components burn-in, it happens and I've heard it many many times.

Try a Furutech receptacle and give it time to burn-in. If you don't hear any difference after a few hundred hours then don't bother - mileage varies.
Cerberus79,

The Break'in of an AC outlet,  ac cord, etc. is  imaginary i.e it exist only in the brain of the person hearing it - so to  them its "real" :-)


Good Listening


Peter
 I have spent 40 years in the electrical field including owning my own company .I have also been an audiophile for 40 years and I still can not beleive what goes on here. Can someone please explain to me what " breaks in " in an outlet ? The only actions on Your ac voltage source that actually do something are filtering and isolation. A good filtering device is the best thing to try first and will solve almost all line problems.
What a timely post for me. I just received my GTX-D R. I was going to install it this weekend. I hadn't even considered break in period. I think I'll run it in on my beer fridge for a while instead. I'll be leaving in two weeks for a month long vacation in Europe, so I think that by the time I get back to Canada, that should be more than enough time. Any thoughts form other members on this plan?
Doing well Lak-mainly just enjoying my system and listening to records at this stage. Doing the odd minor upgrade or cartridge change every year or two. Did a mono setup with a 2nd arm on my table late last year which I'm enjoying.  

I switched over to an Oyaide R1 with wall plate as the main receptacle feeding my system a number of years ago but am still using an older line conditioner with cryoed Hubbells for the balance. 

I might splurge and have Steve Huang build me a basic power distribution unit using either Furutech GTX's or Oyaide R0's to replace that conditioner in the next few months. 
Refrigerators and Chest Freezers are still the best home option for burning in receptacles. Has much more to do with the surge when the compressor kicks in, which will very often exceed 15 amps for a very short period of time. This will get you much better results than continuous operation of an appliance that might draw 5 amps continuously. 

2 weeks on each half of the receptacle should get you pretty good results. 

Something like the Audiodharma Cable Cooker will be even better; if you have a dealer that has one it is a no brainer to pay a few extra bucks to have them burned in before shipping. 
And here's a general question: If my PS Audio P10 is plugged in, but without the components running, will the P10 draw enough current through the Furutech outlets by itself?
lak - Oh! I think you are suggesting that running a lamp might not be enough current to do the job?
assuming arguendo that a freakin' power outlet needs to "broken in"...

the duty cycle will not make any difference
If you’re going to plug something into an outlet, with the intent of having the outlet carry current for two to three hundred hours, make it something that will remain, "ON" for two to three hundred hours. Fridges and coolers are only, "ON" long enough(each hour) to maintain a certain temp. If they’re well sealed and/or not often opened/closed, that may only be ten to twenty percent of the time.
wylmars, in my opinion, I believe you would be better off running your refrigerator, if not possible then a fan, for burn-in purposes. Lamps will work but not my first two choices.
Post removed 
How do I burn-in the receptacle? Would plugging in a lamp and running it day and night work? Or, must there be a significant load on the AC to be effective?
+1 aniwolfe. That’s what I did. In fact, I picked up a pair of slight used Carbon Fiber 104 plates off eBay for $55 each. That’s half off and they were like new. Last time I check, they were available.

And yes, the plate along with GTX frame does have cumulative positive effects on overall sound.
I would start with just getting a Nylon receptacle cover from Home Depot. If you find the Furutech receptacle to be worth keeping, then later purchase the plate and cover. At least that's what I am doing. Step by Step.
Also, when purchasing the Receptacle, I would get it from a place that offers Burn-in...i.e. Take Five Audio or VH Audio. Good Luck!
Be aware of the extremely long break in required for the Furutech GTX-D and R/G AC receptacles to settle in and sound good. 300 to 600 hours, but in my opinion well worth the wait. If possible use some other means to break them in other than installation in your audio system.
No they don't.

I think you get the best out of them with the wall plates and covers but you can use generic ones if you want to save some $.