DAC plus Preamp or DAC-Preamp or DAC-Volume Control ?

I enjoy McIntosh amplifiers, however my buddies 2600 left me underwhelmed, and that is matched with McIntosh amp. Certainly jam packed with goodies minus the sound. linear tube audio and Don Sachs pre amps - greatness!

david_ten,  as an aside, I noticed you have the SGC and SONORE Sig. Rendu combo. If you haven't already, I strongly suggest you upgrade to the systemOptique version of Signature Rendu. The conversion from Ethernet to optical connection to the Rendu is striking. I wrote up an article about it at Dagogo.com. I have been very happy longer term with the upgrade. It's the first optical connection that I have used and enthusiastically endorse. 

Thank you all for your suggestions. Here are the ones that I am currently looking at based on your suggestions and other research:

• McIntosh 2600
• Vinnie Rossi L2
• Mola Mola Makua
• Bricasti M12
• Lampizator Atlantic TRP with PAC preamp

I am also seriously looking at the Freya as a temporary solution, maybe to compare to my current DAC with analogue volume control (Resolution Audio Cantata) and get an idea which of both is better. Due to its price I would be able to swing some decent ICs and PC.

Thank you all again and I will keep you posted regarding my quest.

Thankfully, I was able to score a used unit. : )

20k,eu preamp, that's definitely not a budget priced Freya. Enjoy.

Cheers George

My system has changed since the start of this thread in Nov. 2018.

System details here: https://audio-system-details.blogspot.com/

@georgehifi   George, as you probably know from other posts, I am very impressed with my Denafrips Terminator. 

As posted earlier in this thread, I chose the Grandinote Genesi Preamplifier and it has been a very, very good choice.

@reverendo   Great recommendations from members @rsf507  and @yyzsantabarbara 

It will be interesting to learn what other members suggest and recommend.

david_ten OP
 plus Preamp or DAC-Preamp or DAC-Volume Control ?

Keep your Denafrips Terminator R2R DAC it's a very fine dac, one of the best I've had the pleasure to hear along with the Holo Spring R2R.

And get a Schiit Freya 3 preamps in one, which can be as a "passive" with the best mechanical volume control there is, or "active" "tube" or "solid state".
And has all the SE or XLR inputs and outputs you need and remote controled,  for just $799 "returnable!! if not happy"

  https://www.schiit.com/products/freya-1

Cheers George   

@reverendo The Mola Mola Makua is an excellent option and maybe a real superstar. I have been participating on a thread on Computer Audiophile about the Makua for maybe 3 years now. We were all waiting for the Makua DAC module and/or the Tambaqui standalone DAC to finally arrive.

In that thread another option was also discussed to maybe rival the Makua. That involved the Benchmark LA4 preamp + another standalone DAC such as the Tambaqui or some other great DAC.

The reason the LA4 was brought up on the Makua thread was that the design of the 2 preamps seem to have the same goal of making it as quiet as possible. I believe these 2 preamps are the quietest preamps out there (LA4 #1). The LA4 preamp has the reputation of making DACs sound their best. The LA4 is also continually sold out on the Benchmark site (a good sign).

The price of the LA4 is $2.5K and almost all reviews of it say it sounds like a $20K preamp. The Makua is around $20K with the DAC module. Though I have seen the Makua without the DAC module offered for around $7K used. The LA4 has a 30 day home trial which I will take them up on before I dip my toes into the Makua.

BTW - I noticed a Mola Mola Tambaqui DAC up for sale for about $7K yesterday. It looks like it sold in 1 day.

BTW2 -  http://www.enjoythemusic.com/superioraudio/equipment/1019/Mola_Mola_Makua_Preamplifier_DAC_Phono_Kaluge_Power_Amplifier_Review.htm

Bricasti M12 which is a full function pre that includes their M1-SE dac.

Vinnie Rossi L2 Signature Preamplifier with a DAC Module

Very interesting conversation. I would like to ask for help, since I know what I'm looking for.

I want a full active preamp with integrated DAC. The full preamp should obviously be active and the DAC should be of very high quality. I have seen that the Mola Mola Makua fits my description, but am having difficulty to find the other options. Could anyone point me in the right direction?

Mine just arrived.  I put it in my second system and was stunned at the tonal purity, visceral impact, clarity and soundstage.  I typically listen to tube preamps.  This unit does not sound hardly anything like solid state.  Sounds a bit like a well done contemporary tube rig.  I have owned and listened to north of 15 preamps over the years. I have 4 right now with another tube preamp being built as we speak.  The Truth preamp is top of the heap.  

Ralph, I will follow through on this. Your guidance is appreciated. Thank you.

@david_ten

Your Plan A (Post above) is superior to > Plan B (Input transformer) Both of which are superior to > What I am doing with the cable approach (Keeping Pin 3 'Open/Not connected')?

I've listened all three ways. The transformer has to be pretty good to keep up- it tends to have less bandwidth and detail and this is measurable (at least its bandwidth and distortion is). I prefer to use the signal that is presented by the balanced source- it tends to be more accurate than if you only use one phase as in an adapter. This is probably because the single-ended connection is more susceptible to noise and the like.

I've been running this sort of connection for about 10 years in one of my prototype amps and have modified many amps with this connection since. I first read about it when researching some of the works of George Philbrick, who is often credited (inaccurately, but he was certainly an early pioneer) with building the first opamps, which were vacuum-tube.

David,
Plan A option  per Atmasphere is a very intriguing proposition 
.Charles 

@atmasphere  Thank you very much. I'll run it by both the amp's designer and Richard Gray, who is local to me and would do the work.

For clarification, are you saying:

Your Plan A (Post above) is superior to > Plan B (Input transformer) Both of which are superior to > What I am doing with the cable approach (Keeping Pin 3 'Open/Not connected')?

Thank you.

Thanks, Ralph. How would I go about doing so?

You could take the amps to any competent technician, have them contact us (651-690-2246) and we can tell them how its done (instructions are below). Otherwise you could also ship it to us.
Any SET has an input tube. Normally the signal comes in on the grid of the tube. This is the center pin of the RCA connection and also pin 2 of the XLR that will have to be installed. Pin 1 of the XLR is the ground of the RCA.


Pin 3 is where its different- that is connected through a coupling cap to the cathode of the input tube. If the tube has a cathode bypass cap, the ground side of the cap is lifted and connected to pin 3 (and when the RCA connector is in use, pin 3 is connected to pin 1 via a jumper you place in the XLR connector). If the amp lacks a cathode bypass cap (which will be an electrolytic), you sort out the value needed and connect it between the cathode of the input tube and pin 3, with the plus side to the cathode.This connection is not balanced, but it **is** differential. The amp’s character doesn’t change, while being able to process both phases of the balanced connection.

Plan B: install an input transformer to make the conversion. At least with our preamps, plan A above sounds better.

@dsper  Thank you!  I will be sure to update in a few weeks.

@atmasphere  Thanks, Ralph. How would I go about doing so?

Hi david_ten,

You ended up in some rarefied atmosphere🤑!

My sincere hope is that you truly enjoy your choice.

It will be interesting to hear your listening impressions once things meld together a bit.

Thanks for listening,

Dsper

@david_ten


 
FWIW its possible to set up an SET to accept and process balanced signals in the differential domain- so no need for an adapter. The mod can be done to any SET and is really quite simple!

@dsper   I was holding off on updating the thread for another week or two. I wanted to have my system settled, prior to doing so.

In essence, I followed your advice and went with an active preamplifier/linestage.

There were a number of consultations 'behind the scenes' with a number of folks on whether the DAC+Volume Control, Passive Pre, or Active Pre would be a fit. A number of brands and models, of each type, were also discussed and considered.

I came very close to going forward with a Nagra HD DAC (which has a volume control) but the general and specific advice was that it would not be the best fit. That (process) also clarified the reasons and need to eliminate DACs with volume controls. 

Given my experience with driving the 2A3 amps with the T+A Pre-outs, and my future speaker choice (and again after a ton of consultation), passive preamps have also been eliminated.

I settled on going active with sufficient gain. The Robert Koda Takumi K-10 and the Grandinote Genesi were my top choices. The third choice was the CJ GAT 2.

This has been the most exhaustive (and exhausting) and time consuming process for a single component I've personally been through.

I chose to go with the Grandinote Genesi, at this time. 

It is in system, but since it is truly / fully balanced (only) I have a properly configured female XLR to male RCA  IC on order.

david_ten,

I have not heard The Truth, but I have recently acquired an Axiom II with the Taylor upgrade. Half the price of the Hornshoppe piece.

The Axiom has been used with about ten CDs so it is not broken in yet. 

It appears a bit bright at this point but is worth listening to further to decide if it will give my Conrad Johnson Premier LS17 - 2 a run for its money.

Thanks for listening,

Dsper

Everyone: Thoughts on Ed Schilling’s The Truth Preamp (from the Horn Shoppe)? The T-3 version is an option.

@dsper  Thank you. Agreed. It's also the most versatile option and will allow for optimized pairings.

Hi david_ten,

FWIW, I would vote for a separate DAC and preamp. 

A preamp is really a heart of a system and DAC technology keeps changing.

The ability to keep the preamp that you like and just change the DAC, I think, provides more flexibility. 

Thanks for listening, 

Dsper

Let's leave budgetary considerations out of the discussion. All options are welcome.

I'll get the Preamplifier list going with an audio friend's recommendation that I consider Dave Slagle's Emia Remote Autoformer.

I had asked a similar question on mattnshilp’s ’Absolute top tier DAC for standard res redbook CD’ thread. Responses are copied below, since they apply. I also did not want to take Matt’s thread off-course.

Thanks to all whose responses are copied below.

[If there are any objections to my copying your posts, let me know and I will edit accordingly].

recommendations for an upper tier DAC with a very well implemented volume control

@toetapaudio "I suggest taking a look at the Mola Mola Tambaqui when it arrives later this month. Going by the Makua (pre with dac module) it should be extremely good. £9k in the UK."

@bill_k "If you like NOS PCM DAC designs (no DSD), I suggest you check out the Metrum Acoustics Adagio which is their top of the line. It incorporates a unique volume control implementation which varies the operating voltage of the DAC rather than adding in an additional stage or digitally implemented volume control. It provides a continuous volume control without typical losses or compression most other designs exhibit."

@ctsooner "I have finally gotten the Memory Player DAC integrated into their server. It’s special. They are still working on it and we are waiting on the Stealth Caps to arrive, but It will end up being in the discussion of top DAC’s built I think. Soon Matt will have one in his system to play with I think. It’s worth keeping an eye on as I think Mark (the designer) is onto something specially. It does have two small signal tubes in it, but the sound is impactful, tons of micro and macro info for that emotional pull on music and it’s got great totality so far and it’s not broken in and it has many upgrades to come. We will even be pulling it out of the server and it may become a two box DAC. Just not sure yet. I like how they have dealt with the digital volume control, but mine also has an analog one too and in time, we will build that up to a world class preamp. This way I’ll be able to run a great stereo or set of mono’s off the DAC ."

@guidocorona "If you like NOS PCM DAC designs (no DSD), I suggest you check out the Metrum Acoustics Adagio which is their top of the line. It incorporates a unique volume control implementation which varies the operating voltage of the DAC rather than adding in an additional stage or digitally implemented volume control. It provides a continuous volume control without typical losses or compression most other designs exhibit. Sounds like a perfect description of the volume control of my Jeff Rowland Aeris... Yes, not the newest DAC on the market by any stretch of the imagination, but particularly when powered by the external PSU power supply, an amazing maker of music."

@mitch2 "I can second the Metrum Adagio that was already recommended by @bill_k. I owned the Adagio as well as Metrum’s Pavane at the same time and after several weeks of side-by-side comparisons, I chose to keep the Pavane and have it upgraded by Metrum to their Level 3, which means the interior build is at the same level as the Adagio, but without the volume control.

The sound of the Adagio is very close to my upgraded Pavane but I already owned a preamp that I like very much and I liked the sound through my preamp just a little bit better than through the Adagio alone. This was probably due to some minor coloration, possibly caused by components in the preamp including AN tantalum resistors in the volume control, Jupiter copper foil caps, Lundahl transformers, or other circuitry. The Adagio had slightly better resolution and both sounded super clean with good staging, tone, bass, and plenty of drive. If I didn’t already own that preamp, I would have kept the Adagio and been perfectly happy. There is probably "better" in some way but for a simple solution that gets you off the merry-go-round the Adagio should certainly be on your list.

FWIW, Steve Nugent’s well-regarded Empirical Audio DACs also adjust volume by changing the reference voltage. I think there may be at least one more that does that but I cannot remember the name."

@georgehifi "I believe they still do it in their flagship model dacs or cdp. either by user programming or physical links or trimpots.
But Wadia, Mark Levinson and the Bricasti M1 used digital domain remote volume controls, but they also had the ability to set the max output gain of the analogue output buffer, so that you used the digital domain volume at or near full output, so there was no chance of "bit stripping" (lowering resolution 16bit 14bit 12bit the lower you go)
This is the perfect dac /cdp volume control."

@wideload "I’m at a much lower level than you’re looking for but who knows. I was very happy with an Exogal Comet Plus until I heard the Mojo Audio Mystique. No contest. The Mojo has an organic, palpable, engaging presentation that is intoxicating. The Exogal makes lovely sound, The Mojo makes music. Goosebumps."

@nitewulf "I’d highly suggest the Chord Dave or the Metrum Adagio. Conversely, I believe you have the Denafrips Terminator which is a high end dac, perhaps you could add a well regarded passive attenuator between the dac and the amp."