@hilroy48
Yes the low mass version of the Model 6 has arrived. Works well the MC2000 I have But another goodie arrived from Jeff that I have installed at the moment. Sorry about the arm board condition, that one has trialed a few arms. Fortunately I can use it for this project.
This version is going to be available on the site in a bit. It is more than just adding 3 inches to an existing Model 6. The yoke is modified. The thickness of the inner and outer carbon fiber wands are changed, along with the number of stiffeners. Of course the headshell and bearing offsets are also different.
|
Of the 7-8 tonearms I own, the Triplanar works best of all with my MC2000 (with the qualification that I have not mounted the MC2000 on the Viv Float, yet). I think the estimated effective mass of the TP alone, which would include its integral headshell of course, is 11g. I don't know where I got that number, so if I am in error, please correct me. Other tonearms I have tried include Reed 2A, Kenwood L07J (the integral tonearm on the L07D TT), Dynavector DV505. The others I own need not apply (obviously too high in effective mass or not mounted on any tt).
|
Did you get your tone arm? Any updates.
|
 Jeff built My series 6 tonearm for my Marantz Table. All silver wiring. I am super satisfied with the arm, I have a Goldring Ethos SE cart on it, the sound it incredible. His stuff is worth the money and the wait.
|
Great question, couldn’t tell you. All I can offer is experience.
|
What’s gonna make the native top plate of the MK “ring”? I mean where would the energy come from if you have good footers on the TT?
|
@whart Right Bill. I will get the low profile unit as it will go into my wall unit, the granite is at bar height, 42" and I am getting shorter by the minute. I am down to 5'6" from 5'8" I would have to get a ladder to use your table.
|
@whart : Hey pal! Always good when you chime in!
|
@mijostyn @wrm57 - wrm, my doppelgänger here, is right on with adding a "plate" to the Minus K. I use an HRS platform that I had prior to purchasing the Minus K. Particularly with my table, the Kuzma XL, which is machined brass, I would not want the "ringing" effect of metal on metal- the top plate of the Minus K is a plain metal panel. (I am using their large bench top model, BM-1, with the Minus K supplied stand, a nice piece of welded steel frame with phenolic top that has recesses for the Minus K feet). I assume mijo will use a slimmer version of the Minus K if it is meant to be concealed as part of a plinth. The BM--1 is a big beast.
Good luck,
Bill
|
@mijostyn : yeah, that’s the idea: weigh it all first, including your chosen top plate. They work best near the upper limit of the weight range, like within 10 lbs or so. M-K will do custom ranges for surprisingly little up-charge. Steve might say no at first but if you get him laughing, which isn’t hard, he’ll get his engineers on the job.
|
@wrm57 Thank you for that tip. it sounds like a great idea. My plan was to get everything, now including your top plate, weigh it all together to get the right sized MinusK. Your plate seems like a great device for a constrained layer construct, aluminum alternating with wood would work.
|
The fun will be getting it all to balance.
Don;t mean to turn this into a Minus-K thread, but @mijostyn : after using M-Ks for a dozen years on multiple turntables, I found the easiest way to balance is to use an oversized top plate of your choosing, placed on the native top plate. That way you can shift everything en masse, turntable and added top plate, to the point of balance. The added benefit is you can choose something that sounds better. I’ve never loved the sound of my turntables directly on the M-K metal top plate, which is damped but still rings. I mean, no one listens to electron microscopes so M-K doesn't care about that. They're lovely and helpful people but audiophiles are a tiny part of their customer base, an amusing and somewhat confusing breed. Right now I’m using a Panzerholz slab. Being a skilled woodworker, you can no doubt fashion something that will function, look and sound just right.
|
the MinusK is bouncy. I'm not sure if they have a lock out yet.
@mijostyn : If you’re wondering whether Minus-K has a lockout lever of some sort to freeze the suspension, the answer is no, at least not on the BM-8 models I’ve owned in the past or the slimeline CT-2 I have now. But it’s very easy to bottom out the suspension with the little crank the side, stabilizing your turntable for installing an arm or cartridge.
|
@neonknight No, it is not available yet. A new one is immanent. I think it will be Eclipse drive, not direct, but I do not know that for sure. Next time I talk to Christan I will ask.
@lewm Correct, a poor man's Dohmann with vacuum clamping and a magnetic thrust bearing. The motor will go right on the MinusK with the rest of the turntable. The fun will be getting it all to balance. I figure the 5T and LT will counterbalance the motor. I'll put the 5T in the normal location. It will just make it on the normal tonearm board. The LT will go at the front, right corner. It would be much easier to do this with a Kuzma Stabi R, but I really prefer the features of the Sota. The Cosmos has been a revelation in turntable performance with its amazing pitch stability and dead quiet backgrounds. The Millenium/MinusK will not be as nice to use as the MinusK is bouncy. I'm not sure if they have a lock out yet.
|
Mijo, That's a poor man's Dohmann. Where are you going to mount the Millenium motor?
|
@mijostyn You think the Millenia is available? I am not sure they have produced a new one lately. It seems like they are devoting their time and resources to getting their direct drive one to market.
|
Hey Neon,
I have wanted a turntable I could mount a Schroder LT or Reed 5T on and nothing out there has the features on the Cosmos Eclipse Vacuum. A few days ago I had a brilliant Idea. I am going to take a Sota Millenium Vacuum, remove it's suspension, mount it on a Minus K platform with a Reed 5T and a Schroder LT. I can trade my Cosmos in on the millenium taking a little of the financial strain off.
|
Last week the low mass version of the arm built arrived. I have it temporarily set up on the table, but I need a spacer as the Scheu arm board is just too low. this is a problem with the Schroder arm I have on it also. But Jeff has fabricated one for me and it is in the hands of the Royal mail service. Can't say enough good things about the man.
Even so i can temporarily set up the MC2000 with a shim and I have it playing. This is a pairing that works nicely together. This combination sounds effortless together, and the texture and tone of the bass region is fabulous. There is so much detail and expression in this region. Vocals are uncolored and the top end is detailed without being etched. No issues tracking either. Everything i had hoped for.
For what an Audiomods arm sells for, it is hard to imagine a better value in analog. I am certainly enjoying this one.
|
Totally agree! Jeff is one of the good guys in this business. I have 3 of his arms and his service and commitment to his customers is second to none!
|
All Jeff has to do is drill out more holes!
Kidding aside, the MC2000 has a lovely sweet and delicate portrayal of music.
|
