imhififan
Responses from imhififan
| Broken plastic guide on tubes - how to tell which way the tube fits in socket? Something like this may help https://www.tubedepot.com/products/octal-tube-keyway-replacement | |
| Home theater couch? I love my stressless, very comfortable... https://copenhagen-imports.com/wp-content/uploads/2019/12/Stressless_Emily_modern-sofa-04.jpg | |
| Missing caps on EAT E glo Petit phono preamp Can you use the other channel as a reference? | |
| No Sub-Mojo @discnik Maybe you can try connect the sub to 'MAIN IN' instead of 'PRE OUT' while the switch is at 'NORMAL' position. If no signal output to the sub, next thing to try is using a 'Y' adapter connect one end to 'PRE OUT' and the other end to 'M... | |
| Set-up with two subs and an integrated amp davkobza4 posts05-14-2020 1:22amI just placed my order for a pair of 4-10 subs with high-gloss obsidianschwarz (jet black) finish. These will accompany my Tekton Encores with same finish. I found it from another thread. BTW, those 4-10 sub has sp... | |
| I have a weird buzz issue; can you help me solve the problem? Many higher end components are designed by barely competent engineers. Eric Lauchli? | |
| share 2 CH speakers with HT set up or use separate speakers for front end of a 7.2 HT? Do you own the Lyngdorf? You sound like you’re speaking from experience with the unit. No, I am not a owner, but I had some experience setup a TDAI 2170 when my friend got his unit.Since your Dali Helicon 800 are full range, so my suggestion is no... | |
| I have a weird buzz issue; can you help me solve the problem? Just out of curiosity, did you have CODA bump up the amount of Class A watts? I wish I could, but I need most of the class B power to feed the power hungry Thiel. | |
| I have a weird buzz issue; can you help me solve the problem? I also like to add that something like a cold solder joint can caused intermittent problem like this, that explain why the amp was dead quiet when plugged into the mains at audio store and the manufacturer. | |
| I have a weird buzz issue; can you help me solve the problem? I have a CODA CSiB v3 integrated plugged directly to the wall, without any shorting plug installed, no buzz, hum or any kind of noise while bias “ON” at any selected input. I think the last thing you can try is to turn off all circuit breaker exce... | |
| Need Help! Couple ideas: https://www.audioadvisor.com/prodinfo.asp?number=PGVUXAS https://www.homedepot.com/p/Noble-House-Bartlet-39-37-Clear-TV-Stand-Fits-39-in-TV-7628/307889422 Put the turntable on top and the amp underneath, for the homedepot one, just s... | |
| Need preamp recommendation Sell the Proceed and up the budget to 8.5k, go for a Mark Levinson 5805 integrated with phono and DAC built in. | |
| share 2 CH speakers with HT set up or use separate speakers for front end of a 7.2 HT? Since you already setup and calibrated the Lyngdorf for stereo playback, all you need to do is add HT bypass to it: 1. To setup HT bypass, disconnect front L/R speakers on the Denon and using a pair of interconnect cable connect the Denon front... | |
| Set-up with two subs and an integrated amp This is what you need: https://www.crutchfield.com/S-BZsGXIya5Pj/p_543ADP12/Russound-ADP-1-2-Speaker-level-to-Line-level-Ad... | |
| Aragon 2004 Wanted to add a pic but don’t see a way of doing it here. Can we not post pics? Go to Virtual Systems page, select ’Create System’, you can upload pictures to your system... https://systems.audiogon.com/systems/1986#&gid=1&pid=1 |