imhififan
Responses from imhififan
| cable connection I will buy the cable to experiment, let my ears to decide where to put it. | |
| Broken plastic guide on tubes - how to tell which way the tube fits in socket? Not sure how I would know which direction to install it however. If you have a DMM, you can identify the filament pins by using continuity test. In the case of 6SL7, the filament pins are 7 and 8. http://www.tube-fullmusic.com/Fullmusic%20Tube... | |
| Wanted: Lightweight Krell KSA-100 Clone???? It look like dual mono design, convert it to monoblocks and you can get it under 60 lbs each :) | |
| What to replace an Adcom amp with? Check out a used Sunfire Cinema Grand or Sunfire Cinema Grand Signature Amplifier, it replace my Adcom 7500 and to my ears, that is a big improvement. | |
| H/K - Rabco ST-8 Going back to LPs and TTs baflles me too. Was SUCH A PIA. To some, that's the fun and enjoyment... | |
| I have a weird buzz issue; can you help me solve the problem? The Prima Luna had both 4 & 8 Ohm speaker inputs; I used the 4 ohm inputs as that is what my Dynaudio Focus 380’s are rated at. The CODA only has one set of speaker inputs. Is there any chance at all that there is a mis-match between the C... | |
| Shunyata Venom PS8 - Loud Buzz - How much current..........? I think the smps inside Bel Canto 1000 monoblock is not collaborate with the Shunyata Venom PS8. | |
| 12V Deep Cycle battery with Pure Sinewave inverter for tube amp? The purpose in asking is to see whether it would be possible to bypass A/c and feed d/c to the amp or preamp with a modification to bypass the a/c section? Yes, almost all audio electronics are power by DC! Maybe you can consider install car s... | |
| Broken plastic guide on tubes - how to tell which way the tube fits in socket? Something like this may help https://www.tubedepot.com/products/octal-tube-keyway-replacement | |
| Home theater couch? I love my stressless, very comfortable... https://copenhagen-imports.com/wp-content/uploads/2019/12/Stressless_Emily_modern-sofa-04.jpg | |
| Missing caps on EAT E glo Petit phono preamp Can you use the other channel as a reference? | |
| No Sub-Mojo @discnik Maybe you can try connect the sub to 'MAIN IN' instead of 'PRE OUT' while the switch is at 'NORMAL' position. If no signal output to the sub, next thing to try is using a 'Y' adapter connect one end to 'PRE OUT' and the other end to 'M... | |
| Set-up with two subs and an integrated amp davkobza4 posts05-14-2020 1:22amI just placed my order for a pair of 4-10 subs with high-gloss obsidianschwarz (jet black) finish. These will accompany my Tekton Encores with same finish. I found it from another thread. BTW, those 4-10 sub has sp... | |
| I have a weird buzz issue; can you help me solve the problem? Many higher end components are designed by barely competent engineers. Eric Lauchli? | |
| share 2 CH speakers with HT set up or use separate speakers for front end of a 7.2 HT? Do you own the Lyngdorf? You sound like you’re speaking from experience with the unit. No, I am not a owner, but I had some experience setup a TDAI 2170 when my friend got his unit.Since your Dali Helicon 800 are full range, so my suggestion is no... |