imhififan
Responses from imhififan
| I need advice on bi amping what is the best way to go, vertical or horizontal? Go vertical, put the amp close to the speaker, use shorter speaker cable. | |
| HT/2 channel setup sharing is hurting my brain You need a speaker to line level convertorhttps://www.crutchfield.com/p_543ADP12/Russound-ADP-1-2-Speaker-level-to-Line-level-Adapter.html | |
| HT/2 channel setup sharing is hurting my brain I'm not getting anything out of the tube pre-out to the sub. I'm guessing because it's a switched pre-amp out section? There is a toggle on the front of the unit to switch it to pre-amp mode. https://www.china-hifi-audio.com/download/Oper... | |
| HT/2 channel setup sharing is hurting my brain You can use a Line Level Source Selector https://www.amazon.com/Technolink-TC-721-Turntable-Source-Selector/dp/B078R... | |
| HT/2 channel setup sharing is hurting my brain You can use a Line Level Source Selector https://www.amazon.com/Technolink-TC-721-Turntable-Source-Selector/dp/B078RV... | |
| Voltage conversion of Accuphase A-48 Do you think both 100V and 120V are the same wiring? No. imhififan, do you have any reasons that looks like wired to 120V? I was just guessing. Maybe the A-48 just changed one set of primary winding color of wires (orange-red-gray) only... | |
| Accuphase DP-560 do I need to change J4, too? For 120V conversion, no need to change J4. | |
| Is there such a thing as too much power? depending on how loud one listens to music, the efficiency of the speakers, and the acoustical environment, having a big reserve of power may not increase sound quality. +1 Horses for courses You don't need 20 tons air-conditioner to cool down 20... | |
| Homemade sub used with Sonus Faber Olympica III I think your solution is add a high pass filter to the Sonus Fabers or use a separate amp to power the JBL. | |
| Homemade sub used with Sonus Faber Olympica III If you like to know how low the JBL and the Sonus Faber Olympica III can go, connect the JBL to one channel and an Olympica to another channel and play some test tone. https://www.youtube.com/watch?v=fwrbFj9r10Y | |
| Homemade sub used with Sonus Faber Olympica III How you connect the JBL to your system? Did you use a separate amp to power the JBL? | |
| Amp binding posts for bare speaker wires Since you always favored bare wire connections for connecting speakers to amplifier binding posts, my suggestion is terminate the neutrik speakon cable with banana plugs, so you can separate the speaker wires (bare wire) from the sub wires (banana... | |
| Voltage conversion of Accuphase A-48 I have checked the wiring of A-48 100V. Here's the actual wiring: 100V - 1=white+orange 2= red 3= blue 4= black+yellow 5= brown 6=none I could be wrong, but it look like wired to 120V | |
| Contest with reward Save Me - Queen https://www.thespacebar.co.uk/ebayscans/57267.jpg | |
| How to remove ground pin on power cable https://www.barrypgoldberg.com/classic-car-accidents-seat-belts/ |