imhififan
Responses from imhififan
| Bryston 2WSB switch box to choose amp that drives speakers Niles Spk-1 switch both positive and negative, the 12v trigger is set and forget.http://ww.nilesaudio.com/product/speaker-level-b-switcher-12v-triggered-FG00240 | |
| Phonostage opamp replacement 22v only one i can see in the LME49860, which isnt bad for a cheap opamp. Another cheap opamp that work @ + / -22V : OPA2604 | |
| Pre-Amp input questions. You can use the monitor or the processor as the inputs for the DAC and use the toggle switches on the front to select the source. Provided the DAC has its own volume control | |
| Mcintosh MC275 monoblock different version https://geoffthegreygeek.com/amplifier-power/ | |
| Phonostage opamp replacement 22v The +/- 22V supply voltage limiting your choices : ( | |
| 120v to 240v Adapter to power Amp in USA Transformer design for 50Hz has no problem work at 60Hz. | |
| Phonostage opamp replacement 22v The LME49860 can work at +/- 22V max | |
| 120v to 240v Adapter to power Amp in USA What you need is a voltage step up/down transformer/converterhttps://www.amazon.com/dp/B06VVXN2SR/ref=psdc_10967761_t1_B00FHIF8KC | |
| Room correction, DSP for dummies. https://www.minidsp.com/applications/digital-room-correction/drc-basics | |
| Budget DAC/Preamp with Remote? https://forum.audiogon.com/discussions/the-rme-adi-2-dac-32bit-768khzhttps://www.amazon.com/RME-ADI-2-DAC-2x4-Converter/dp/B07B6C8PF6 | |
| SME 312S issue Add a cartridge spacer may help https://www.ebay.com/itm/Delrin-Headshell-Cartridge-Spacers-non-magnetic-non-inductive-turntable-VTA... | |
| Anyone have a Little Fwend tonearm lifter? Similar product for 1/4 https://www.ebay.com/itm/Automatic-Tonearm-Lifter-For-LP-Turntable-Disc-Vinyl-Record-Protect-Stylus/... | |
| Where can find the circuit of this power distributor Just wondering if anyone know what component it might be using. http://oysteineliassen.blogspot.com/2015/12/supra-mains-block-md06-eusp-mk3.html | |
| Proce2 You can custom input name for any input on AVP, "Dasin" could be the name of that input source. | |
| Older Receiver as power amp using tape out jacks to separate pre-amp? If I understand your question correctly, you want to use a receiver's tape loop to separate its preamp section and amp section? The answer is NO, the preamp section still in the circuit after the tape loop, only the sources selector been separated... |