hifihvn
Responses from hifihvn
| Is It Safe To Connect Speakers To Two Amps?? One other possibility might be to shut your tube amp down (its own power switch) while the music is still playing. I don't know if this this would be safe for your tube amp. If not, let the tube amp at least cool down enough so the tubes can't amp... | |
| Is It Safe To Connect Speakers To Two Amps?? Tklp, what tube amp are you using?Niles themselves have concerns about keeping a load on the tube amp at all times, in this speaker switch(link below). They recommend an extra resistor on the tube amp at all times on some products. I don't know if... | |
| Is It Safe To Connect Speakers To Two Amps?? The relay system I'm referring to would be in the switch. I should have said the protection system used in the switch, might offer zero protection for the amp, in this case. | |
| Is It Safe To Connect Speakers To Two Amps?? No, it's way to risky. I don't know how the Niles is made, so I wouldn't risk it. A lot of switches are made with solid state only in mind. And you did mention tubes. First off, with any switch, the plus and minus both should be isolated, through ... | |
| Bryston 4B-ST If it is the Scintilla's, this site has some amps that may drive them. [http://www.apogeespeakers.com/scintilla.htm] | |
| Bryston 4B-ST Apogee Scintlla's? | |
| YouTube Favorites to share. I like to use YouTube to find music I've totally forgot about, or never heard. One big problem I've run across a lot times is Sony, WMG blocked a lot of them do to copyrights. Yes they've bought some of these for almost nothing, from what I was to... | |
| RF Interferenece and hum on tonearm Also, if your arm has a "SME" type of plug in headshell, maybe try running a ground from the cartridge leads ground wires, maybe off of a clip ground to the metal headshell, if it is metal This may also work for any metal of head mount, as long as... | |
| RF Interferenece and hum on tonearm Also, if your arm has a "SME" type of plug in headshell, maybe try running a ground from the cartridge leads ground wires, maybe off of a clip ground to the metal headshell, if it is metal, otherwise this idea wouldn't do anything. If it does work... | |
| RF Interferenece and hum on tonearm Swampwalker was posting while I was, and got his in first. I forgot about Grado having this problem, but it still could be the ground for the arm. | |
| RF Interferenece and hum on tonearm It sounds like the tonearm ground has a poor, or broken connection somewhere, is the most likely thing I can think of.Try wrapping some soft wire strands (after stripping 2-3 inches of insulation off it)around the arm, with enough length of wire t... | |
| Do Interconnects need to "warm up"? I also agree with what "Brf" said in the above post. I was in a dealer that had a system running all day long that sounded a little bright. After listening to it for ~10 minutes, that little hint of bright of sound it had, was hardly noticeable af... | |
| Audyssey MultiEQ I never done this before. But this is on the net if it is of any use. [http://www.integrahometheater.com/download_firmware.cfm] | |
| Surge Suppression vrs. Lighting and Power Spikes Better slow motion video.[http://www.youtube.com/watch?v=-bvmEYxEYiA&feature=related] | |
| Surge Suppression vrs. Lighting and Power Spikes A Youtube link to watch if somebody else didn't post it first.[http://www.youtube.com/watch?v=2wY_t7zVIXY] |