Outlet Question


Could not find category for outlets so I am asking here. What would be good outlets to change too? I had hospital grade from Home Depot 20 years ago but left them when I moved. Is there any good outlets for about $20 U.S. anyone can recommend? I don't want to go crazy but get something better than what is stock on homes built in the last 4 years. Any suggestions would be great!

romad

Incidentally and in case anyone might be interested, here’s a rare comparison of several of the more popular “audiophile” outlets.  It’s 10 years old but still interesting/useful today I think.  Note that it includes a cryo’ed (not standard) Hubbell outlet.

https://www.enjoythemusic.com/magazine/equipment/0114/audiophile_ac_outlets.htm

@jea48 

I installed them about 10 years ago , model 8200W  15amp 

purchased from HD Supply , good deals for 10 or more .

The inside is the exact same as the 20 amp , you pay extra for the cover !

I took a 15amp apart and found the 20amp side blade .under the 15amp cover .

@imhififan said: . . .    Wow! 🤔🤕🚯

 

Context...

 
 

Not all Hubbell 5362 outlets are created, (manufactured), equal...

Notice the silver color Yoke/supporting back strap on some of the Hubbell 5362 photos?

That is not silver, it's galvanized steel. Steel is not good for the sound from audio equipment. It will cause a slightly grainy sound from an audio system.

Hubbell changed hands several years ago. Do your homework before buying.

Ferrous Steel... Just look at an audio grade outlet company's outlet, that have their outlets made to their specs. You won't see any steel used. 

You don't have to spend big bucks for a good sounding outlet. Just buy one that has a non nickel plated brass back strap an non nickel plated brass contacts.

@imhififan , Sorry if I didn't explain it well enough for you.  What part don't you understand?

Jim

..

@romad  , a few years ago there was a good run of threads related to the ins and outs of installing dedicated circuits, and because of those I learned something that I had done was violating code and may have nullified my home owners in the event of fire.

Anyway, I had put in some new circuits for dedicated lines and I used 12 gauge wire and 20A outlets, BUT I decided I would use 15A circuit-breaker to protect those circuits with as I felt that since a 15A CB should trip at a lower heat than a 20A CB I would be going the extra mile to protect those circuits.  Which I still think is technically true, however I found out here that regardless of what size wire is used, the breaker determines what amperage the circuit actually is, and therefore a 20A outlet (which will accomodate a 20A appliance) on a 15A circuit (which is what  I turned my circuits into by installing 15A breakers, despite the 12 ga wire) is a no-no.

I assume steel backstrap is fine, maybe non magnetic stainless steel is preferable. No?