Monstrous power cables


Why?

I’m sitting in my listening chair looking at the over $1K power cable that came with my Running Springs Audio Maxim power conditioner.  The guy I bought the unit from said he auditioned three cables all costing over a grand and liked these the best.

The cables are about the diameter of the cardboard center of paper towels (maybe even thicker) and weighs about five pounds.  It’s absolutely monstrous!  I’ve got a piece of wood supporting it under the receptacle and use other items to support it under the Maxim.

The electricity is carried through my house probably using 14 gauge wire.  What’s the logic using more than that going from the outlet to any component?

I’ve got quite a few power cables of various diameters, the thickest (other than the one connected to the Maxim) being the AC9 s from Pangea.  And to be honest, I don’t think I’ve ever AB’d power cables, having just assumed they do make (at least) some difference.

 

 

128x128audiodwebe

@audiodwebe

Have you considered that your dealer knows what he is doing and actually recommended a good power cable choice based on the price/performance of your power conditioner?

I didn’t buy from a dealer, but from another music lover either here, on the ‘gon, or US Audio Mart.

From what he told me, the dealer had three different cables available for audition and the previous owner went with what sounded best to him.

@audiodwebe Few years ago I had RS Dmitri with its https://sigsound.com/running-springs-audio-mongoose/ 20A power cord and I have also tried its other, more expensive https://sigsound.com/running-springs-audio-crown-jewel/ power cord that my friend had with its RS (Jaco?) conditioner. The moongoose power cord is in fact Cardas Golden Reference cord and at the time I remember reading that internal wiring in RS is all from Cardas copper.

The reason I am writing this is because manufacturers have their house sound, not only with Ic and speaker cables, but with their power cables as well (at least few that I have tried extensively, like Cardas, Nordost, Shunyata and many others) and that ’first’ cable going from wall to conditioner will have a major influence on the ’flavour’ of your system.

The 'size' or the thickness does not mean a thing (in this case) At the present, I am using AN Kondo power cord in my tube preamp that has the smallest diameter of all I have tried, but it gives me the sensation of the deepest stage, like no other has.

Do not know what other power cables and gear you have, but the cable that previous owner had with RS might be great with his system, but you need to understand is it best for yours too.

There are some gear brands that are known for ’liking’ certain cable brands, in broad sense,like Spectral and Mit, Ayre and Cardas, or Burmester and Nordost, and so on, but there is not an clear advise that anybody could give you, which cables to use, since there are many factors (choice and combinations of gear you have and your individual taste)

I believe that power cords, or even better, the combination of your gear and their power cords have a major impact on the type of the sound you will end up with and in my case, choosing ones that are ’best’ is something that takes time and patience...and best advice I can give you is to try any one you can get to understand their ’flavour’...and than pick the ones you like best...

Not to add more to possible confusion, but sometimes the single ’best’ one is not the ’best’ one in grand scheme of things....its like cooking....sometimes some ’great’ flavour could become too dominant...but, that is a ’next level’ story...

Methinks what’s really missing in this thread is a reflection on litz vs. solid core. To my ears solid core (Acoustic Revive, Nordost et al) wins out every time in direct comparison with location accuracy, transparency and impulse response. Those who believe that cables don’t matter should get their ears checked or check into another hobby.