2. analog
  3. 154556-20132

Phono's $2100 to $2600

Dear all I would be interested in hearing your thoughts for a phono upgrade.  What is driving this is that I recently got a Lyra Delos and a Nordost Heimdall phono cable as presents- the sound is simply in another league than before (prior cartidge was Benz low output glider).  So now hooked- all I want to do is spin vinyl all day and all night!

The rig is VPI Aries 1 with upgraded footers, separate flywheel, and synchronose drive- the phono stage is a Trigon Vanguard II and this in turn is hooked into Prima Luna Dialogue premium (using nos 12au7's).  The amps are Pass labs xa60.5 mono's driving Thiel 3.7's.

For a long time I was looking to upgrade the preamp but now I think I will got for the phono 1st and consider a new line preamp later on unless I find a full function preamp to do it all in one shot- obviously I would have to up my budget.

Anyway, assuming I just look at the phono I think I have narrowed my choices to the following with my budget:
1. Zesto Andros (about $2.1k used)
2. Sutherland 20/20 ($2.2k new)
3. Allnic 1202 ($2.6k used)

Potentially I could also look at the PS Audio Stellas phono (the advantage here is that I can trade in my trigon for full retails $500).  And lastly, completely out of left field I have to say I have this urge to try a Sutherland PHD which just sounds like a wonderful phono that made a mark (and would be about $1k or so).

I should also add the Herron that seems to have quite a following but they simply do not show up used so I have put that one aside for the time being.,

I realize I should listen to these in my system but if buying used I can't always do that so I would very much like to get your opinions.   The system sound good but I would like better soundstage depth and texture/detail- but without going overboard on the latter.


pgastone
pgastone OP
77 posts
 
@tablejockey 
The PL is really a wonderful preamp- and yes I do switch out NOS tubes a lot...I'v been going between Brimar's, Amperex, and Telefunken's- and they do all sound different.  The first sound more lush and full, the Amperex more defined in the reproducing the sound stage, and the Telefunken's somewhere in between. I cannot say which sounds better vs the other as it really depends on the source material ; I would probably say the 1st two are my favorite.  I have yet to try Mullard's.  What I can say is that I just love the whole experience.

I would like to try to upgrade from the PL just to see what a preamp with an upgraded volume control could do vs alps pot.  If I where to identify where my system falls short is soundstage depth- it is there but I think it could be significantly deeper-  and slightly better soundstage placement.  I think this may indeed be related tin part to the volume control and other better internals.

That said, right now I am focusing more on the phono.  

After doing a little more research I think the PS Audio for SS is a worthy alternative- with my current phono as a trade in it would be $2k.

As for tube option I am not quite sure which way to go.

And then between the two- SS or tube- I am still pondering.  A lot of other members are suggesting the Allnic is the way to go.


tablejockey
3,800 posts
 
pgastone-

I know that feeling of "what to buy?"  Glad i'm done with the madness, and just buy records. Been on the wagon few a couple of years now. Just buy consumables-phono cart and tubes.

I tried the Allnic, it's a very nice piece. The latest model is revised, so you can find the previous model at decent prices. 

If you can find one of these-grab it
https://www.6moons.com/audioreviews2/nvo2/1.html
This was a flavor of the month, a few years ago.
advanced101
25 posts
 
Out of your choices, I would go Allnic.  But, in your price range, I would investigate the Modwright PH9.0.  There are too many good reviews and user feedback to not consider it.
barolobrain
46 posts
 
I have been using a Andros 1.2 for over 12 months now, feeding a BAT integrated and very happy with the results.  Your Delos should provide enough output to pair well with the Jensen 44 trannies (10:1) used in the Andros MC stage.  When I I use my ZYX Airy3 and a Dynavector XV-1s, much lower output than the Delos, I feed it through a DIY SUT with Jensen 347s at 24:1.  I'm guessing that the line stage sensitivity on your PL is higher than my BAT so probably not an issue.
Over the years and prior to the Andros 1.2 I used a ARC PH3SE with and without a SUT depending on cart, a Cary PH-301MM with an SUT, ARC SP-11 MkII with and without an SUT.  All with various carts.  It really gets down to system matching.

Interesting that the Zesto, Allnic and Modwright all use transformers for their MC inputs.  Not sure if you're looking at a Andros 1 or 1.2 for $2,100 but if you can get a 1.2 at that price, I'd buy it. 
rsf507
2,239 posts
 
Agree with @tablejockey I've been using a NVO for many years (as well as a GN PH10) and couldn't be happier. You can still buy them new but it is rare they come up used, that should tell you something.
More to discover