Which speakers are ideal to pair with a Yamaha as3200

The IsoAcoustics are good but it’s about 3 things..Getting the speakers elevated to where the tweeters are more aligned with the ears..Getting the speakers pulled out from the back wall enough to allow the soundstage to develop & getting the one speaker off that subwoofer..Even the IsoAcoustic isn’t going to alleviate the damage done to the sound of the speakers by the deep bass being transfered to the speakers driver & cabinet...
 You might also try pulling the center speaker out to the front edge of the cabinet, angling the center speaker up towards your ears as opposed to firing straight ahead at such a low listening height & using some kind of isolation between it & the stand/rack...

If you like open baffle  the callidan  

Or new sonus Faber G2 -5 

For $6k tons of trickle down technologies 

Do what you can to improve the setup BEFORE getting rid of the LS50's; you may find them much more capable than you think, and you are strangling them by the poor placement decisions.

I'm begging you, @ercubano801, read on speaker setup. Also, you're not high passing or low passing with the AS3200 as it doesn't have that and just playing both the sub and speakers full range... that is gonna work fine but isn't ideal, so you need a dedicated management system. and better speaker placement and angling.

Place each speaker so that the tweeter axis is pointed at each shoulder

Thanks Kofi...so working on the crossover of the sub I don't have the same effect? Would you know what to recommend to have the control of the high and low pass? Thanks again!

I will follow the various tips by buying the isoacoustic stands with tilt and pulling the speakers forward as possible