Which speakers are ideal to pair with a Yamaha as3200

@kofibaffour  i have the phono goldnote ph-10 all balanced

@kofibaffour can you suggest me good TRS to XLR cables for input and output connection?

The television is not connected to the speakers, so I don’t think it’s a problem that it’s not in the center... for the rest the idea of asking for an opinion is precisely because unfortunately I don’t have a listening room and I have to make do with what I have 

When I listen I can move the speakers forward a bit but I can’t do anything else...

The sub is present and is connected to the yamaha pre-out!

Sorry but the white chair is not always there! Is my  error doing the photo!

But using isoacoustic is not good? Using stand is so much better?

Thanks Kofi...so working on the crossover of the sub I don't have the same effect? Would you know what to recommend to have the control of the high and low pass? Thanks again!

I will follow the various tips by buying the isoacoustic stands with tilt and pulling the speakers forward as possible

And one precision…the black sub is not the sub of the yamaha, it is of the soundbar…the kef kc62 is under the table of the othee speaker

@kofibaffour I have the eversolo amp-6 ME gen2…in this way I use the minidsp as a preampli? I connect at the output the yamaha and the sub (no more connect to the yamaha) right?
Just a doubt...if I connect the streamer to the minidsp flex that still has a dac I don't convert 2 times? Or at least I don't lose the quality of the eversolo dac?

Thanks @kofibaffour , I'm taking a look at your links

To do what you tell me can I also use the minidsp flex? Way the south? Is it better?

Another question...I have my turntable and the streamer both connected with XLR cables...how can I insert the minidsp into the system while keeping the connections balanced?

I saw that on the site the flex has individual balanced outputs, should I also take the cables that they make you buy separately?

Dear @kofibaffour 

I wanted to update you on the situation. I purchased the balanced minidsp flex with the cables you suggested. Everything is ok except for the turntable connection that via the minidsp is very bad, it crackles even at low volume values ​​while if I use the streamer if I set the minidsp volume to maximum and use the amplifier to manage the volume it also crackles while if I keep it around -20 db it goes better and does not distort ... the thing that worries me most however is the turntable, truly terrible ... is it possible that it is a question of cables? or incompatibility with the prephono (Goldnote PH-10 connected to a technics 1200 gr2 with MC audio technica cartridge) ... I await your kind feedback, thanks

Technics-->RCA-->Goldnote-->XLR output to TRS input -->MiniDsp-->TRS output 1-2 to XLR input of Yamaha s3200

@kofibaffour 

thank you! I change the gain on the goldnote (it was +3db and now -3db) and is better! But probably i Must reduce more the gain but on the software of the minidsp I couldn't do it...can you explain to me how to do it?