@ercubano801 how are you doing bass management with your KC62 since the S3200 doesn't have a subwoofer out?
Which speakers are ideal to pair with a Yamaha as3200
Good morning everyone! I kindly ask you for advice on which speakers could be ideal to pair with my new Yamaha s3200 amplifier
I currently have some Kef LS50 meta but I would like to make a qualitative leap.
I have to buy Bookshelf with a maximum depth of 36 cm and a maximum width of 25
I'll also post a photo of the room. The important thing would be a large stage and a detailed sound... I won't listen to them at very high volume and I also have a Kef KC62 sub available that I can match in case.
Budget: Up to 6000 euros
My current ideas: ATC SCM20psl, ProAC D2R, Platinum 100 audio monitor
Thank you so much
Showing 7 responses by kofibaffour
Your setup needs a redo in terms of separating distances. Also your amp has no subowoofer output @ercubano801 |
I'm begging you, @ercubano801, read on speaker setup. Also, you're not high passing or low passing with the AS3200 as it doesn't have that and just playing both the sub and speakers full range... that is gonna work fine but isn't ideal, so you need a dedicated management system. and better speaker placement and angling. Place each speaker so that the tweeter axis is pointed at each shoulder |
@ercubano801 connect the streamer to the Mini DSP via a digital interconnect. USB/Coaxial will be the ideal connection. And connect the turntable's phono stage to it via the XLR input provided the phono stage has XLR outputs. What phono stage so you have? Also yeah since you have a streamer then the Flex Balances would do.
I assumed you didn't have a streaming tool that is why I went for the mini DSP SHD which has streaming tools inbuilt |
Wait if you have the Eversolo which has streaming protocols, then yes, it becomes redundant to get the SHD which has streaming protocols. Do not get the SHD, get the MiniDSP Flex rather - https://www.soundimports.eu/en/minidsp-2x4-flex-trs.html?srsltid=AfmBOoqHP115osD3NFT2mqKbzW1dYGQBTQZGGCYbf4AIG2ufp8iBAxBr
So you output from your Eversolo to the MiniDSP via USB. Get this USB cable for that connection - https://www.amazon.de/Printer-Scanner-printers-Lexmark-Samsung/dp/B00P0FO1P0 Again I ask what will your phono stage be? @ercubano801 |
Yeah then you plug the Phono stage into the balanced input of the Flex Balanced and you're good on that front too @ercubano801 So the DMP-A6 into the Flex balanced by USB cable as stated in my comment before yours and then from the goldnote, you use XLR/TRS cables to link the phono stage to the Flex Balanced and then you output from the flex Balanced with TRS/XLR cables into the AS3200 |
@ercubano801, yes, I can. Two of this links the Goldnote XLR outs to the TRS input on the Flex balanced Two of this links the TRS outputs from the Flex balanced to the power amp |