What is the quality and performance level of Fluance turntables??


My U-Turn Orbit turntable crapped out on me again, that is the motor does work and also hums  at higher volume when it did work, 

Considering  one the "Fluance "tables  Need some feedback if possible about their quality and performance

Thank you.

sunnyjim 

sunnyjim

Nearly all TT's are capable of replaying a LP to a level it is able to be enjoyed.

It does not matter the age or cost of the TT.

I have Aurex SR 520 Models bought in at low monies as a donor for upcoming modification projects.

I own other Vintage TT equipment from the same era, that costs through certain sales sites a 100 x more than I bagged the SR Models for.

The SR as a standard model with no TLC given, is totally capable as a Standalone TT, to the point it would need to be A/B compared to other better fettled TT's to speedily differentiate the qualities is is not demonstrating. 

Here is the conundrum, I can take a selection of owned Vinyl LP's that are extremely poor production, which will make any TT, of any value present in a manner that is unwanted, unattractive and not wanted to be maintained.

@sunnyjim stated " I don't have a lot of vinyl but cherish was I have and play them on a quality table "

To keep this experience ongoing will not prove difficult to put in place, not blowing the budget on the TT, will certainly leave funds to Grow the Vinyl Collection.   

'As a tip', Amazon has a great returns policy, when a Vinyl LP is purchased, if it is seemingly of poor quality, have it exchanged. I have done this up to three times on One Album purchased and ended up with a very impressive quality LP.

If you keep your eye on Warehouse at the time of the returns, the chances are the reduced priced Album being seen is your very own returned Album. Moral of the story Avoid the Bargain Offers in Warehouse.  

  

I bought a Fluance RT-85 Turntable around 2018 or 2019 after reading good reviews online and watching a Steve Guttenberg video. I was putting together a budget system for a 4th listening room in my house, I didn’t want to put a huge dent in my wallet.

 

I must say, I was very pleasantly surprised at the quality build and the sonic output with the Ortofon 2m Blue Cartridge that CAME WITH the turntable at a price right at $500 USD. I hooked it up with a Sutherland KC Vibe MK2 phono preamp to a Reisong A-10 EL34 tube amp I picked up new for less than $325 (shipping price included) that I also bought based on a Steve Guttenberg review, and connected a set Polk Audio Model 10’s I bought new back in 1987 along with a set of Klipsch Heresy from 1985 and a pair of Klipsch KG 1.5’s I bought new back in the early 2000’s. All of the speakers sounded fantastic -- each with their own sonic signatures. I settled on the Heresy’s for right now and have not looked back.

 

If you are looking for a budget-minded turntable for a secondary system, in my humble opinion you can not go wrong with the Fluance RT-85. Even if it is going to be your primary turntable, I don’t think you will be disappointed.  Are there turntables out there that will out-perform the Fluance RT-85 in all aspects...sure, just like every other audio component we could discuss. But will you pay double, triple, or several additonal "zeroes" in the final price tag to achieve these benchmarks? Yep, absolutely.

 

Bottom line, for the money, I don’t think you would use all the fingers on one hand to count up the turntables for $500 that will outperform the Fluance RT-85. Again, everything I stated in this post is my humble opinion, and like a certain body part, we all have opinions and some of them smell worse than others. I hope this info helps you make a decision.

 

Happy listening and enjoy a clean groove.

 

Allen

 

Thank you to the members who responded. I was going to  consider the Fluance model that is 349.00, or possibly 399.00, but the analog planet review has tempted me to consider the model RT-85 which is 499.00. I don't have a lot of vinyl but cherish was I have and play them on a quality table

 

Cheers, 

Jim

 

There’s nothing wrong with the Fluance. Comes with a nice cartridge and is reliable. I like the removable headshell.

My Denon DP 47 F was $10......Luxamn PD 272 $15......Pioneer PL 535 $20.....Yamaha YP 450 $10.

You can get out there and look around this Fall and might get lucky for very little money and buy a nice cartridge with the extra money.

Post removed 

@sunnyjim , in answer to your question, so far I've found the Fluance RT85 table to be of good quality and it performs very well. I mean over 1,000  5-star Amazon ratings must mean something. That said, don't let yourself be deterred by the low price. 

Also, not that specs tell the whole story, but I compared things like wow & flutter and SNR numbers to other more well known and accepted TT brands - like ProJect and Rega. The RT85's acrylic platter is standard versus an upgrade for Pro-Ject. FWIW I had a Pro-Ject in for a trial, and sent it back.

If you look at the basic features and build quality it is a good base to build from. I immediately replaced the Ortofon 2m Blue with an Audio-Technica VM750SH and this thing sounds excellent! Could stand to be a tad warmer, so I've been considering a Nagaoka 200. But overall, I'm pretty happy with it.

I've had it about a year, and can't speak to how it'll stand up over time ... since I generally only listen to vinyl on Sundays. But so far, so good. Hope this helps.

 

Happy Listening! 

 

Put in your best offer on this

Rega Planar 6 demo as new weeks use w/war... For Sale | Audiogon

As mentioned, you get what you pay for.

Other than novelty, sub $1000 entry tables are a waste of money, IMO. I’d up my digital setup before playing with a turntable.

Call the company, and get a new motor

Turntables are available from under $100 to well over $50,000. In general, you get what you pay for. In the budget range Rega is well respected.