Tara labs burn in

I love the sound of my TARA LABS MUSE speaker cable right out of the box.

How will it sound after 200 hrs,300,hrs and 500 hrs.

Have TARA Labs Muse speaker cable it is sounding wonderful after 200hrs I guess it will improve further after 300 or 400 hrs etc.

That's Tara Lab's cable's in my pic by my name. 

Mmm, come to think of it, since 1990!

The answer to your question  is 500 hrs, I have had numerous different Tara Lab's cable's since 1995, so yeah, I would know. 

Thank you millercarbon. I beleive that issue you mention with faulty components coverying other faulty ones. But in my case, I was using one power cable transparent audio mm2x on my phono with very good bass.I changed to the taralabs power cable which gave much better Sonics than the transparent cable but not regarding bottom bass. With the new taralabs things are worse. This is what I can’t explain

Easy to explain: the new taralabs cable has worse bass. Ditch that cable. It sucks. End of story.

Have you tried it in another position that has a 20A plug? 

G

There is not any other change in my system

Thank you millercarbon. I beleive that issue you mention with faulty components coverying other faulty ones. But in my case, I was using one power cable transparent audio mm2x on my phono with very good bass.I changed to the taralabs power cable which gave much better Sonics than the transparent cable but not regarding bottom bass. With the new taralabs things are worse. This is what I can’t explain

I have found that with cables, if I don’t like them right out of the box, no amount of running them in, sprinkling with fairy dust or, using Voodoo won’t make them sound better.  If you like the sound when new, then you will get refinement as the cables get run in.

^^This!  

Never, ever in all my life heard anything start out bad and magically become good. Got one PC right now, it was analytical etched hyped and lean in the beginning. No bass. Let it run in 24/7 and after a week or so it was not nearly so analytical or harsh but just as hyped and lean. No bass to begin with, no bass now either. Haven't done a survey but suspect there are a whole hell of a lot of em out there just like it. Why I am happy to stick with Synergistic. Never had a bad one yet- PC or otherwise.  

Is it perhaps a wrong match with the phono preamp, 

This is another one where I diverge from the crowd. There is no such thing as matching. One power cord (speaker cable, interconnect, whatever) does not magically change and go from sounding bad to sounding good simply by being connected to a different component. They are what they are, period. 

What happens instead is a lot of people have components that have all kinds of faults in different areas. Which they all do. No such thing as perfect. Memorize this if you can, it will serve you well. The power cord (IC, speaker cable, etc) performs the same everywhere. But sometimes the faults are complimentary. Other times not. People confuse this and say its better with this or that. No. Wrong. It is the same always and everywhere. What you are doing if you follow this approach is using one fault-laden component to cover up another fault-laden component. It is what I call the band-aid approach. Cover it up. 

DO NOT ever try and "match" components this way. Because if you do, then even though you might be able to get everything all bandaged up and covered over and sounding good, this will only be the case until you change something. Then your upgrade reveals all the crap you cobbled together with band-aids. Sound familiar? This is why we hear so many people talking about their new upgrade revealing all the faults everywhere else. If this doesn't sound familiar, hang around a while, it will soon enough. 

Petg60 thank you for reply. The ARC phono indeed does not need 20a, it is only the plug and nothing more. Do you think it may be a matter of I’m compatibility between the phono and this specific cable? If it is a yes, maybe I ll never get the dynamics back.

A pc can give the impression of restricted and lifeless sound when out of the box but should give signs of its quality. With use they can become better and better. How many hours it requires to full break in depends from construction. Your ARC may have a 20A plug but most likely would not need a 20A wire, overkill.
As a tubed unit 12-14awg would do the trick and give you back the lacking dynamics.
Check with your ARC dealer.

G

jason bourne i am afraid here is not the right forum for you...

i did not choose on my own 20A plug. Its the audioresearch ref 2 phono that needs 20A by construction.i have seen cables that i did not like completely just out of the box, but after burn in or break in (whatever you like to call it), changed to something special.

"The capacity of Humans for self delusion is apparently unlimited" - Mr.Spock the Vulcan

Why did you get a 20 amp PC?

A Phono stage It is like a 60 watt, 1 amp circuit.
It will take a long time to "Break in" any PC. 1000 hours if there is silver I bet.. 2-400 with copper, just because of the size and the very VERY light load. Just for the record.

I don’t do business with people that "Burn-in" anything.. it’s "Broke-in" so you know...

Cables are conditioned (cooked or simmered) and broken-in.. NOT burnt in..

YUP I just burnt in my engine.. LOL no you broke it in.. Words Count..

Daisy chain it for a month on your refrigerator. Take it from there and plug it into your power amp it OR as a main PC for a cleaner or maintained distribution center. BIG LOAD.. not 60 watts, .5-1 amp load, MAX

Sucks the dynamics out of the piece. If there is bass to be had through a PC (kinda funny) heavy copper works to a point.

BUT in a Phono stage, a great #16-12 wire size. Constructs vary. A great silver clad PTFE in a weave.. tune it with the ends. Red copper, silver, gold, rhodium, la-te-da.. #16 is where I would start.. with red copper ends..
With top of the line terminals, 4 wire weave, shrink tube, armor and a 2 week cook... 60.00 usd.. I know it will sound better than that will ever sound... Probably a great cable, but wrong application. No idea what it cost either..

Who the heck sold you that OP? Take it back.

Regards..

I have found that with cables, if I don’t like them right out of the box, no amount of running them in, sprinkling with fairy dust or, using Voodoo won’t make them sound better.  If you like the sound when new, then you will get refinement as the cables get run in.