bumper
17 responses Add your response
Just an update so other folk will know for the future. Cary says it is electrically the same but will not fit because of the size. Also, they don't recommend a directly heated rectifier 5R4 or 5U4 on the SLP-05. " Use indirectly heated tubes like the 5AR4, 5V4/GZ34, CV1377, GZ32, GZ33, CV729." In any case, the reply came too late as the seller couldn't wait and sold the Brimar. Not that it mattered in the end. |
Post removed |
Post removed |
Post removed |
Be sure to use the original British-made GZ34. The commonly available (and cheap) Mullard's are made-in-Russia knock-offs! No good! Real Mullard GZ34's have been out of production for decades. Ditto for USA and Japanese production. These are both 5AR4's. And are far better than today's Russian or Slovakian (JJ) types. Real British Mullard GZ34's will cost about $100 - $200. USA and Japanese 5AR4's $50 - $100. |
Slightly less warm/better definition(realism), but- still with an extended life expectancy(20K to 30K hours). There are also a few differing iterations, within their metal base, GZ34s, that will vary slightly in presentation. I prefer the tall bottle, 5R4GYS. You may find a change from the Blackburn Mullard, a sideways move. I’d never dissuade one, from experimenting, though. It’s all about ones own aural palate and system, in their listening room. |
Post removed |
Personally; there are only two 5AR4 iterations, that I would consider against the Mullard(Blackburn) GZ34. Both, from Philips: https://www.ebay.com/c/168100339 and: https://tubeworld.com/gz34metal.htm No connection to either reference. |