Phono Preamp Recommendations

I'm really happy with my Pro-Ject Phono Box II.

Parasound Phono Z

For that price. look into a used Bellari VP-129 or 130. I have one in my second system and for the money they are quite good.

Not that I've heard them all but I preffered the Musical Fidelity V-LPS to the Cambridge 640P.

I love the Cambridge 640P. It has made me a better person.

I strongly prefer the Cambridge 640P over the NAD PP2 phono preamp.

So if I have warts and gray hair and bad breath I need to get the Cambridge as it is obviously a cure-all?

Here're the specs on the system to which it will be connected, in case it changes any assessments:

AR XB in transit, not sure if I will put new cart on it or not yet. Has the factory Shure 91 and a Pickering XV15-400E. The Phono pre will be connected to this table.

Denon DP-7F with Audio Technica AT450 w/ brand new Shibata stylus on the Phono line of the existing preamp.

CD, Reel, cassette & CD Recorder, and ADS D to A USB converter

Optimus STAV 3400 acting as preamp. (on the to be replaced soon list)

Adcom GFA-545 Mk2

JBL LX-500s.

I'm all but decided on the Cambridge. The raw specs for both the 640 and 540 are the best in my price range. But I don't have the option of auditioning equipment so I am trying to balance my research and inexperience with the experiences of everyone here. I enjoy the range of opinions I see in reading both my threads as well as others that pertain to my interests. I am quite satisfied with the replies I get to most of posts.

Thanks to all who took the time to join in the thread!

Hi Hawkeye, I own the 640P and it was my starter phono pre. Since then, I moved up to an ARC PH-7. In my opinion, the 640P is a nice way to get started with vinyl and IMHO I think it performs well over its price point. I will be looking to sell my 640P in the next day or so. The unit is in pristine condition and I have the original box and manual. If you are interested, send me an e mail through A'gon. Good luck

Got the 640 and really like it. Interestingly enough have discovered by comparing using the same table that the phono stage built into my Optimus STAV-3400 is actually quite good. There is almost no discernible difference at normal listening volumes. Of course the built-in cannot do MC like the Cambridge can.

Greetings,
I just recently purchase a Parasound JC 3 Phono Pre-Amp.
Very happy with my purchase.
It got some very good review in Sterophile a few issues ago. Glad I made the purchase.
It is driving my very low output Denon DLS1 (0.15mv) very well. For the price I think it is a real deal.
Respectfully,
Joe Nies

I hate to resurrect a very old thread, but there as someone looking to get back into vinyl very soon there is a point here that surprises me:

" Interestingly enough have discovered by comparing using the same table that the phono stage built into my Optimus STAV-3400 is actually quite good. There is almost no discernible difference at normal listening volumes. Of course the built-in cannot do MC like the Cambridge can."

It surprises me that an Optimus can approach the quality of a Cambridge phono stage! Is there an intrinsic advantage to a built in phono stage? Or are the differences between phono stages modest? Or am I reading too much into this? I have a Lexicon Mc-12 and a Citation 7.0 for preamps, but I will need a phono preamp for either/both.... Otoh, I have an ADS integrated amp with a phono stage (I think MC and MM, don't recall
at the moment). So this might change how I set things up. Thanks!

I use the 640p with a Pangea P100 power supply and it sounds great. Worth the 100 bucks for the Pangea. The 640p has been replaced by a new model (641P) that might be better, but I haven't compared them (the new one is basically the same price as the old one). I assume the Pangea works with the 641p. I see no reason to buy another phono pre myself as this 640p sounds so good with my system and it is one of the few out there with the rumble filter I need, but if I replaced it I'd just get the new one.

Aewhistory: Remember that both the internal phono stage and the Cambridge are being run into the same line-level preamp. I have never heard this Radio Shack product, but I can't imagine it offers resolution high enough to allow the listener to hear differences among phono stages. Perhaps gross tonal differences would be apparent, but I would imagine that the Optimus line stage is the bottle-neck in this system.

I think anyone getting into vinyl would be well-served by looking at older preamps that included phono stages as a matter of course -- before line stages were common.

I know that my Adcom GFP-565's price here on Audiogon is way below what any comparable recent stand-alone phono stage would cost if bought new (or used). Awesome phono stage. And you get an entire preamp to go with it!

Using an Adcom 565 might solve the "input matching" level issue I have with phono preamps...although adding a lot of circuitry to the mix, you'd have some serious gain to mess with at the input of the main preamp...to make all the sources the same level anyway.

I use a Jolida JD9. This little beauty of a phono preamp is under $500 and performs on par with much more expensive models. Also, it is very easy (and inexpensive) to make some DIY upgrades that take it into the realm of multi-thousand dollar phono preamps. I wrote a little review here of the JD9 including upgrade instructions.

Bondmanp, I feel so silly. For some reason it didn't occur to me that the phono preamp would, of course, be plugged into the Radio Shack. And yes, this would almost undoubtedly lack the resolution to make out much difference. Ugh.... So often the simple answers elude us (by which I mean ME).

Clockmeister, I will probably give my ADS preamp a go with my turntable before investing in a phono preamp, but if I like getting into vinyl I will definitely get a phono preamp. I already have some nice equipment and don't want to spend more. The way I see it, there really isn't any reason to spend 'x' number of dollars on a preamp with a built in phono stage when I can use my Citation 7.0, for example, and get a good phono preamp. The citation is an excellent analogs preamp already, so I'd have to spend a lot of better it.

BTW, thank you all for the other responses. I haven't bought anything, of course, but if I do I am leaning toward a Cambridge Audio 540p. My main reason is that it is cheap and gives me a way to take another step into vinyl while keeping my investment low. However, I'd gladly take opinions on this piece. For instance, would it really be worth going up to the 640p for someone still experimenting? Things like that.

My 640p is a thoroughly vetted inexpensive item that got some of the best reviews I've seen for ANY phono preamp, has one of the most accurate RIAA circuits ever measured, is built like a tank, and sounds amazing. It also has a (rare these days) 20hz rumble filter that I seem to need, and I stuck a Pangea P100 power supply on it simply because I had one on a DAC and liked it. The Pangea is much better than a "wall wart", cost less than a decent tire, and now that the 640p has been replaced by a new model you may be able to find one for peanuts. Remember...if somebody hasn't actually heard a piece of gear in a system, their opinion of its sound quality is utterly meaningless.

Amen Wolf!

Research NAD Monitor Series or Adcom with PHONO input.  I think you will be very happy!