Oyaide

Update: Regarding my earlier posting about the P-079 I changed things around. I cut the stock plug off the step-down transformer and spliced it on the end -- the result was dramatic. The transformer now leads via a Master Coupler to a 100-volt Marantz PM-15 (original 1994 version) integrated amplifier. I took the stock plugs off the Master Coupler and spliced on an Oyaide C-004 IEC and P-037 -- a dramatic improvement, once again. If you experiment with low cost SR Master Couplers and high cost Oyaides you may find a perfect match for your system. It is all about synergy. You will notice an immediate difference in resolution (so much more low level detail), bass and sound stage.

I have also been experimenting with Oyaide plugs and IECs -- replacing the stock plugs and IECs on the ends of Synergistic Research Master Couplers. The effect has been nothing short of astonishing especially with the P-004 and C-004. Resolution, dynamics, sound stage have all improved dramatically. I see that SR actually uses an Oyaide P-079 on the end of one or 2 of their high end cables. Actually I have found the P-79 veiled and constricted the sound and the P-004 opened everything up and took the veil off with the Master Couplers -- this was on a special purpose cable from a 100-volt amp to a step-down transformer. But I imagine Ted Denney at SR knows what he is doing with the cables he is terminating with Oyaide plugs. He is one of the most knowledgeable people in the high end audio business -- IMHO.

Just clocking the thread

I have a 1.5 m length of Oyaide Tunami I bought from
VH Audio terminated with Oyaide p/c-004 plugs i also purchased there, you can see pics here;

http://home.comcast.net/~cpkver8/images/pc2.jpg
http://home.comcast.net/~cpkver8/images/pc3.jpg

The drop in noise floor was so dramatic I had to adjust my volume setting and panicked I had screwed up the attachment some how causing a drop in volume level somehow,lol.. It was a rather startling and obvious change from the
pre-fabbed stock cable I'd had. Mating it with their R1 may have had something to do with the overall success of the effort but I am very satisfied.

How is the Oyaide Tunami GPX wire attached to the C-O46 plugs--solder, crimp, screws? I'm obviously new to DIY, and I couldn't tell from the web site pictures.

I've got a bunch of Black Sand Mark V PC's with Wattgate 330i / 350i terminations and one with the Oyaide 004 series terminations. IMHO, the Black Sand / Oyaide has markedly more sparkle.

Tvad...tell us how it goes..I just might use the bulk wire and put the plugs on that depending on your evaluation. Thanks Stan

TVAD...that may be so, however, I wouldn't have the fun of experimentation. I used C-046, and P=046. They are the most neutral.

Actually, I found Cardas power cords the very worst power cords I have ever heard. Yes I chopped the ends off of Purist, Audioquest, Cardas, and they all very much improved with the Oyaide plugs, and they all sounded pretty much alike. I like best the wire that I got from the electrical supply house. I may try the Oyaide wire. I believe that is 10 guage to the 12 guage I'm using, and has an additional ground/shield. As it happens my system is DEAD quiet with this wire.

Mr Bill, Chris Venhaus (www.vhaudio.com) and www.takefiveaudio.com sell bulk Oyaide cable.

Hi Tvad,
Which retailers offer the Oyaide in bulk?
Thanks

I have a bunch of different wire and a couple of power cords from Cardas and Audioquest..tried those

I had extension cords I made myself...3 conductor 12 guage, SJ 300 V. AIW-K SCA FT1. I used regular top grade plugs that was recommended to me from a large electrical supply house. I chopped the ends and installed the OYAIDE C-046, and P-046 on the ends.. Wow!! I suppose if I use that OYAIDE silver wire between them it would sound better, but I found that the wire has far less influence on the sound than do the plugs

What Oyaide plugs did you use? I have a few cables in my system with Oyaide plugs and use their outlets as well. I have an R1 for the wall outlet and the BPT power strip uses SWO-GX outlets.