Oxidation, how to prevent?


I will soon move to a hot and humid area.

Can afford to run AC all day long not to mention it's not green, like your expert opinions how to prevent it?

Some of my equipments have shinny chrome faces, can I use car wax on them to prevent oxidation? What about RCA or XLR jacks? I don't think I want to use wax there since it will degrade sound, what other options do I have? I can put covers on the unused plugs, but it's not air tight and will still degrade over time.

I often read cartridge suspensions will dry up over time especially in hot weather, does humidity helps or is it worse? Will I be better off storing unused cartridges in humidity & temp control vault?
semi
The question was, "How to prevent Oxidation?". I stated to us WD-40 after "Deoxidizing" in order to prevent new "Oxidation from occurring". I have used this method for over 30 years. It will work for the applications he mentioned except for the cartridge, or a reel to reel tape deck.
WD40 is a machine oil[petro-chemical] in a solvent carrier.Better to use a silicone based lube,Belray,Tri-flow etc. etc..Less chance of degrading things it contacts.Not to mention the smell and superior lube qualities,YMMV,Bob
There is a thermostat made by Honeywell that will dehumidify by using both heat and cooling even if from seperate sources. Baseboard heat with ducted A/C or Heat & A/C from ducts.
First it turns on the cooling to dehumidify and lower the tempature by a few degrees of setpoint then turns the heat on to bring the tempature back up, it does this till the desired humidity is reached. Once the humidity is under control the cost should be minimal but dehumidifing is not cheap if the area is not well sealed.
Post removed 
Semi,
Heat alone will not oxidize. Running a de-humidifier is actually an effective way to keep "cool" as well because it helps create an environment so evaporation cools your body. It doesn't need to be set too low. Running de-humidifiers is OK but watch out for furniture. If you buy any hardwood furniture locally, and then you run a de-humidifier, you will run the risk of drying the wood excessively, and causing cracks.
Elizabeth, that's a very clever way of controlling humidity. in Asia, de-humidifier is common and I will have plenty of those running to keep things dry, but wondering if heat alone will oxidize the finish.
Post removed 
Actually the Caig Gold has a small amount of Deoxit and unless the contact surfaces are heavily corroded should be quite sufficient.
I have a spray can of Deoxit and it does help clean the cables. A good copper cleaner like Brasso also does a good job.

Question on something that has bugged me.
After cleaning the connectors, when I apply Pro Gold by using its brush applicator it seems to muffle the sound quality. I always end up wiping it off.

Are you supposed to wipe off the Pro Gold after applying it?
Roxy, I have seen many Jadis oxidized on both the chrome face and gold knobs, not sure if they are chrome but they sure look like chrome.

Hifitime, thanks for the tips. I am aware of car wax containing abrasive, so pure wax is what I am going after.

I do have a bottle of Caig Gold, guess I also need to invest in Dexoit to clean the contacts first.
I've used car wax years back with good results.Use one with the least amount of cleaner.That part is abrasive and might leave a haze,plus be careful with silk screening.I don't know the modern brands.Also,fingerprints!If you look at 60's chrome gear,you will see everyone's fingerprints etched in them.Don't over do the Deoxit.
Yes, use Caig Dexoit to clean the RCA and XLR connectors first and then apply Dexoit Gold to protect it. It made a great improvement on my system. It was nasty to see the cotton swab turned black after you cleaned the connectors.
Let me introduce you to Caig Deoxit which I've used for years in my sound studio and with my sound gear:

http://www.caig.com/

Clean all of your contacts as often as needed....or at least once a year.

I wouldn't worry too much about the external cases of equipment. Internally, you can get some corrosion on relays, coil wound pots and such....which you really can't control unless you condition the air.
Hot and cold don't cause chrome plated surfaces to oxidize. In fact, they don't oxidize. Silver, brass and copper oxidize. What you may be thinking about is the metal underneath the chrome plating, like steel. Lingering moisture on the surface over a period of time can cause rust spots. I think that you are worrying too much.
I can't comment on the cartridge issue.