Has anyone compared old to new Audioquest Cables???


I would like some input from anyone with direct experience who has compared the older higher end Audioquest speaker cables that are now used and selling at an obvious reduced price from when they were new to the mid-level newer Audioquest cables like the Rocket 88 Series, just before the newer cables get really pricey.  I would be looking for bi-wire cables for my Vandersteen model 5A speakers.

Thanks in advance.


bigkidz
Research the old Audioquest "Clear", a excellent cable, and long standing favorite of may of the high end reviewers! Add a fresh set of the latest terminations and cryo treat them and you will have most of the advantages except the Bias Module.
I ran bi-wired Rocket 88s between my ARC REF110 and Vandersteen 3A Signatures for about 18 months. My dealer sent a set of Robin Hood Bass and Zeros home for me to demo for a long weekend. An order was placed the following Tuesday. However, the Bass had a 30 day production delay so I ran the RH Zero as a full range cable with jumpers at the speakers until the Bass cables came in. Even the single RH Zero full range cable was a marked improvement in all facets of sound reproduction compared to the R88s (for which I was once well pleased). When the RH Bass cables arrived, there was another quantum leap forward. The cable architecture philosophies Garth Powell applied to power and now speaker cables delivers truly impressive results. I excitedly wait until his interconnect designs come to market.
Bigkidz if you need a very good Speaker Cable try the Tellurium q ultra black Il, cheaper but they are very good.
I bought sterling 4ft for $400 it was very very cheap, it’s next to dragon Speaker Cable.Dragon I think it’s aq top of the line , long time ago, 
Bigkidz the rocket 88 for its price, will it measure up with dragon and sterling I don’t think so, the clear and argent would probably as good as the rocket 88 maybe better, the indigo is good too, Athough I heard a rocket 88 is superb, more quiet, my own preference is old Audioquest, I am not into battery stuff..,
@ieales - I understand your posted position.  Changes may be system dependent.  My equipment is custom manufacturer by my company so I know that no body here hears what I hear.  My question was asking based upon ones own experience what did they hear.  Already mentioned above is for me to try them as buying at the used prices would allow me if I decided that they did not improve my sound could be sold for little to no loss.

Thanks for your input.
 
Cables are specific to systems. Too many listeners vote with their wallet.

Depending on the connected equipment any cable change may be better, worse or no different.

FYI, I once auditioned [stupid names forgotten] $6k & $12k AQ cables in an B&W / Mac / REL $300k system. The high priced spread was just awful.

All advice on specific cables and most other recommendations are not worth the bits to transmit.
What models of the older top of the line cables are the model names?  I don't really know them.

Two more questions:

Between the Robin Hood and the WT models.  I understand the wire thickness but how much better are they in reality?

Last with my Vandersteen Model 5A speakers will the bi-wire be necessary (I see that one run is for the bass specifically designed for bi-wire) but how much would I lose using a single run with jumpers?

Thanks again.


@mammothguy54,
Great post!
Your experience mimics mine.
The new cables/conditioners Garth Powell is releasing are undoubtedly the best AQ has made. There will be doubters, but, those of us who have heard the difference, know better.
Bob
I'm sorry, but I failed to answer another part of your question.  That is, regarding new Audioquest speaker cables compared to previous generations now selling as used for much less cost.  I can't make that kind of comparison, only to more recent cable models, such as those from the Rocket series.  My only other Audioquest speaker cable was from 30 years ago, when the company was very young and speaker cable technologies were nowhere near what they have been for the past 10 + years.  I am confident, however, that any of the upper-end Audioquest speaker cable from the past 6 to 10 years will certainly deliver an excellent value.  I still stand on my evaluation of the William Tell ZERO, though.  It has the latest technologies from Audioquest and it really shines above the models below it.
One more note; if you must go with a bi-wire configuration and choose William Tell ZERO that requires a separate Bass cable, terminated as bi-wire by Audioquest.  It gets rather expensive.  I had Rocket 88 bi-wire and chose the William Tell ZERO full-range.  It is vastly superior to the bi-wire Rocket 88 I replaced.  I simply added Audioquest jumpers to my speaker binding posts, bringing them back to a full-range connectivity.
After having Rocket 44 for about a year I made the change to Rocket 88.  There was an improvement in that it did provide a blacker background to music.  I tend to believe this is primarily due to the 88 including the Black DBS devices more than anything else.  Then, after a year with the 88 I made the plunge to William Tell ZERO.  Oh my, that was a revelation of improvement.  I am now hearing musical information in a more distinct manner than ever before, particularly in nuances of detail that seems to trail off forever.  Instrumentation and vocals have never sounded so distinct and precise in my system.  I believe these differences are largely due to having the Carbon DBS devices, the geometry which provides zero characteristic impedance, and the multi-layer carbon-based noise dissipation system.  The terminations also use a higher grade copper than the Rocket series.  Both series use the same hanging silver plating, though.  In other words, the step-up technologies in this series of cable definitely delivers on it's promise.  It's equal to the other best audio investment I have made in my present system.  That other investment was having my BAT VK-33 preamp upgraded to the VK-33SE.  The difference in imaging was quite stunning.  Then I added the William Tell ZERO and fell off of my chair but only after my jaw hit the floor.  These are exaggerations, of course.  My jaw is not that long and I really didn't fall out of my chair.  But sonically, these speaker cables are also quite stunning, no two ways about it.  I'll make an analogy for you.  Imagine looking through a window of exceptionally clear glass at a beautiful mountain scenery of Fall colors.  The glass is so clear that you would think it wasn't even there.  And then you open the window and realize, oh my, this is even better.  
You asked why pass on the Robin Hood ZERO and go to William Tell ZERO.  My answer is that I felt better about having more wire.  The Robin Hood Zero consists of 4 solid PSC+ copper wire at 15 gauge.  The William Tell Zero consists of 6 solid PSC+ copper wire at 13 gauge.  Technologies, otherwise, are the same between these two cables.  Sure, it's more money for one over the other.  But I didn't look at it that way.  I saw it as that is the gauge of wire I want for my speakers and that is the technology I want for my speaker cable.  I couldn't be more happy.
Best to you.  I hope this explanation helped and that you end up with a satisfactory decision.
Note; I also use Tornado power cables and the Niagara 3000.  For signal cables I use Audioquest Earth.  The synergy of cabling from Audioquest is a wonderful way of connecting your entire system.
@steven0713

@desert38



Both of you jumped from Rocket Series to WT right over the Robin Hood series - any input on why the jump?  What and were did you hear the improvements over the Rocket Series with the WT series.

Thanks.
I had Rocket 88 for about a year and moved to the William Tells about 6 months ago.  Major improvement.  I even brought them over to a cable naysayer and he bought a pair as well.  Also have the AQ Hurricane and Tornado power cords.  Once again, big improvement over the Y3.
For some reason, not specifically planned, I have owned nearly all the older range of AQ speaker cables including  redwood to wild to wel. The difference (improvement) is pretty well obvious as you move up, so subject to money restrictions you should upgrade. It is a good point however to wonder if newly release AQ cables at each price point are improvements. Like you - I would be interested in hearing any PRACTICAL  comments, rather than from naysayers. I do not know what the current replacements are for what older ones. Anyone can advise?
Post removed 
@bigkidz ,
You know John Rutan is the font of information when it comes to AQ cables.😁 I don't know why you haven't contacted him?
But, if you don't want to call him, I can tell you the newest cables from AQ are really something special.
Listening to the new William Tell series gave me goosebumps.-And this is from someone who never thought cables could make a significant difference.
Pricey? Yes.
Worth it? Well, if you have the funds available, yes, too.
Bob
@tvad meaning buy and try some used models?  What model name of AQ cables would you recommend that I search for?
Post removed