Rel isn't a cheap sub and nice sounding but 2 x Vandy 2Wq can beat that for less price paid than for single REL.
Are two smaller subs better than one larger?
I have checked the threads, and many say that two subs are better than one. However, here is my question: are two smaller subs, say Martin Logan Depths, better than one larger sub, say Margin Logan Descent?
Thanks in advance, as usual,
Your brother in sonic bliss, or at least the continual search for it,
The rustler
Thanks in advance, as usual,
Your brother in sonic bliss, or at least the continual search for it,
The rustler
14 responses Add your response
I'm running dual subs in both my HT and 2-channel analog-primary stereo rigs. Generally speaking, I definitely like two smaller subs for stereo music. My music-only subs are a pair of small (9" cube) Mirage MM-8 subs. They are not for deep-deep bass; they're strong to about 35 Hz. But so many mid- sized speakers aren't putting out real extension below 50-60 Hz, or sometimes a small tower is in a slightly too-large room and can't put out the low bass amplitude to occupy the space. That's where these small subs come in. They totally occupy the 35-60 Hz zone, but best of all, the sealed enclosures (with dual passive radiators), very high internal power (1200w peak), high excursion surrounds and very light (aluminum) diaphragms make for very "fast" woofers, with short rise times and quick settling, making for an excellent blend with the light'n'lively 5-1//4" woofers in my small towers. Plucked string bass is full and lush, yet quick and lively to match fast bass passages. The better Martin-Logan subs are also great at blending for music. Given that their subs are intended to blend with their electrostatics, keeping up with cones is pretty easy for them. If you have the coin, I don't think you can do better than JL. A pair of F112s or F113s would not only make the music come alive, they'll also give you true strong bass down to 20 Hz with no bloat, resonant peaks, or overhang. As much as I lean toward dual subs, I have heard excellent 2.1 sub setups. Particularly I heard a pair of B&W PM1 minimonitors paired with one carefully integrated wilkins.com/Speakers/Home_Audio/Subwoofers/PV1D.html>PV1D sub and the resulting sound was seamless and transparent. The PM1s shined for their even, timbre-correct tonality, seductive transparency, and stunning imaging while the single PV1D sub supplied a foundation that completely integrated with the stereo image from the pair of monitors. So it can definitely be done. In fact, that PV1D was a kick-ass sub and should be on your short list. Small and fast, but goes deep and takes 2-channel input. |
Most likely yes. If you read this white paper from Harmon on the number and placement of subs for optimal listening, you would conclude that at least two subs properly positioned will give you a smoother response in your room than one. If you are the only one in the room, then you can position the one sub for optimal listening. On the other hand, if you move from that spot, or there are other positions in the room that you want to optimize, then more than one sub is required. The quality of the sub(s) will matter, but the positioning of them is most important, but difficult if more than one is involved. It may require a computer program to perfect, whereas one involves a more simple approach, trial and error. This is the white paper: http://www.harman.com/EN-US/OurCompany/Technologyleadership/Pages/WhitePapers.aspx?CategoryID=White%20papers Good luck, have fun, and always listen to the music (not the experts/reviewers/posters/self-proclaimed golden ears)!! |
I will give this a "maybe" in response. Here is why one might be better than 2 (since the very valid reasons 2 might be better than 1 have been laid out above, in particular the emergence of stereo effects at 80Hz or so, and the potential of 2 subs to minimize room nodes): 1) The quality of the single sub is much better. I moved from dual NHT subs to a single REL Storm III, and this was definintely an improvement in my room. Related to the quality of the sub is the quality of the intergration a sub can achieve with mains. For the REL that came through their speaker level connections, but I could also imagine that single subs with DSP (digital signal processing) options could also work better than dual subs without DSP or with lower quality DSP. 2) You don't need a high crossover point. My NHT pair was originally purchsed when I needed an 80 Hz crossover point. My single REL was crossed over at 35 Hz. |
Three notes/Three caveats: Caveat #1: Your budget is sufficient to buy 2 very high quality "small" subs - call that +/- $1500. Note #1: A single large sub will usually provide great maximum output for a given distortion level than will two smaller subs. This observation is based on pretty extensive review of subwoofer test data. Note #2: You can (in the vast majority of cases) achieve smoother bass response with 2 carefully placed subs (large or small) than you can with a single sub (large or small). Caveat #2: If you're using digital room correction (e.g. Audyssey) in an AVR or Pre-Pro, you can smooth FR with the EQ. Note #3: If you cross high enough you will need to maintain stereo integrity so 2 subs will be required. Caveat #3: IME, few people will cross to the subs at a high enough frequency (>100ish hz) to make this concern audible (to me). Others claim that the effect is audible at a lower frequency, so this is a YMMV kind of deal. Marty PS If you wish to go with 2 subs for purposes of maintaining stereo integrity, make sure that your x-over will allow this. To my knowledge, very few AVRs or Pre-Pros (even those with dual sub outputs) are set up this way. |
Yes, in my experience, in my room. I had tried a single, 15 inch driven by 500 watt sub amp, but it did not provide the impact I thought was possible. So, I switched to smaller units. Sold off the 'big boy'. Could not be happier. Lastly. The room makes a huge difference so you will need to tweak placement to get the best effect of two units. |
It depends. In general one larger sub will have more low-end extension than two smaller ones, but two smaller will be a bit faster than a single larger cone. 2 subs allow stereo separation above the point at which bass begins to become directional (about 60hz). Two subs also allow for a more even, across-the-room distribution of bass, but one can at least be tuned to the listening position very well. Your crossover point will determine a lot on the point about stereo separation - from the range of somewhere around 80 to 100hz and higher, you should maybe be thinking of 2 subs, anything below that and you can be thinking about one. Cheers! |